Employer · North Carolina
Warsaw Feed Mill -Est
Warsaw, NC · ~26 workers · 9 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 4.4
- Avg TCR
- 3.9
- Industry avg
- 0
- Fatalities
The verdict
Warsaw Feed Mill -Est runs at 113% of its industry's injury rate - about level with the typical industry workplace, earning a grade C.
Warsaw Feed Mill -Est: 4.4 TCR = 113% of industry BLS 3.9 · 9y Form 300A (see methodology below)
Warsaw Feed Mill -Est safety composite
Warsaw Feed Mill -Est scores strongest on fatalities (safer than 51% of same-industry peers) and weakest on dart rate (safer than 10%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
31/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- D 4.4 per 100 workers
Safer than 38% of industry peers
- DART rate
- F 6.48 per 100 workers
Safer than 10% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
Warsaw Feed Mill -Est: 0.0 → 9.7 TCR
Peak year 2023 @ 17.1 TCR · DART/TCR 1.47× in 2024
Warsaw Feed Mill -Est's TCR rose 9.7 from 0.0 in 2016 to 9.7 in 2024. Peak filing year was 2023 at 17.1 TCR. In 2024, DART was 1.47× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 311119 · Warsaw, NC ABOVE-IND · SMALL
Grade C · TCR 4.4 · 113% of ind
- DART 6.5 DART
- RANK #20/29
- PHOTO Alltech, Inc.
- BOOK 9y book
- INJ 11 inj
- SIZE ~26 FTE
Nearest TCR peer: Alltech, Inc. (0.0 TCR gap)
Read with this employer → · Industry book → · North Carolina employers → · Look up another →
Warsaw Feed Mill -Est in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Warsaw Feed Mill -Est
4.4 TCR
- Alltech, Inc.
Alltech, Inc.
4.4 TCR
- Hubbard Feeds
Hubbard Feeds - Botkins
4.4 TCR
- Harbor Point M
Harbor Point Mineral Products
4.4 TCR
- Cornette Farm
Cornette Farm Supply, Inc.
4.4 TCR
What this shows Warsaw Feed Mill -Est averages 4.4 TCR (113% of the industry BLS benchmark).
Warsaw Feed Mill -Est TCR series: 2016=0 · 2017=0 · 2018=0 · 2019=3.5 · 2020=3 · 2021=6.4 · 2022=0 · 2023=17.1 · 2024=9.7 · BLS 3.9
Where Warsaw Feed Mill -Est falls in its industry
756 industry establishmentsSafer than 38% of graded establishments in this industry, whose median TCR is 3.5.
Narrower to North Carolina alone (the establishments it most directly competes with for workers and contracts): ranked #20 safest of 29 industry employers in North Carolina.
Warsaw Feed Mill -Est has fewer employees than the industry median and a higher injury rate than the industry's median TCR of 3.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 9.7 | 6.5 | 3 | 0 | 0 |
| 2023 | 17.1 | 13.7 | 4 | 1 | 0 |
| 2022 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2021 | 6.4 | 3.2 | 2 | 0 | 0 |
| 2020 | 3.0 | 3.0 | 1 | 0 | 0 |
| 2019 | 3.5 | 0.0 | 1 | 0 | 0 |
| 2018 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2017 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2016 | 0.0 | 0.0 | 0 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
311119 · NC · Warsaw
756 industry employers nationwide with a credible TCR · 16,981 rated employers in North Carolina with headcount on file · 20 employers in Warsaw, NC · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Alltech, Inc. | 4.4 TCR |
| NAICS-TCR | Hubbard Feeds - Botkins | 4.4 TCR |
| NAICS-TCR | Harbor Point Mineral Products | 4.4 TCR |
| NAICS-TCR | Cornette Farm Supply, Inc. | 4.4 TCR |
| STATE-SIZE | R. A. Wood Farms, Inc. | 26 FTE |
| STATE-SIZE | Yarbrough Farms LLC | 26 FTE |
| STATE-SIZE | SOUTH LNM- EST | 26 FTE |
| STATE-SIZE | Case Farms Goldsboro Hatchery | 26 FTE |
| CITY-NEAR | Villari Bros. Foods | 412 FTE |
| CITY-NEAR | The Pork Company 2 | 295 FTE |
| CITY-NEAR | The Villari Foods | 278 FTE |
| CITY-NEAR | The Pork Company II | 169 FTE |
| NAT-TCR | PnP Dallas South | 4.4 TCR |
| NAT-TCR | Foodservice Southern California - 1013 | 4.4 TCR |
| NAT-TCR | Epic Equipment & Engineering | 4.4 TCR |
| NAT-TCR | Mogadore | 4.4 TCR |
| NAT-SIZE | Waverly Feed Delivery -Est | 26 FTE |
| NAT-SIZE | Mac Con Company | 26 FTE |
| NAT-SIZE | Cranston 61 | 26 FTE |
| NAT-SIZE | Bethel communities management 1 LLC | 26 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.