Molds for forming materials (e.g., glass, plastics, rubber) manufacturing · Pennsylvania

X-Cell Tool & Mold, Inc.

Fairview, PA · ~52 workers · 2 years of OSHA Injury Tracking Application data.

F
Failing Safety Record
11.4
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

X-Cell Tool & Mold, Inc. runs at 346% of its industry's injury rate - far more dangerous than the typical Molds for forming materials (e.g., glass, plastics, rubber) manufacturing workplace, earning a grade F.

X-Cell Tool & Mold, Inc.: 11.4 TCR = 346% of Molds for forming materials (e.g., glass, plastics, rubber) manufacturing BLS 3.3 · 2y Form 300A (see methodology below)

X-Cell Tool & Mold, Inc. safety composite

X-Cell Tool & Mold, Inc. scores strongest on fatalities (safer than 50% of same-industry peers) and weakest on dart rate (safer than 2%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

F

16/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
F 11.41 per 100 workers

Safer than 8% of industry peers

DART rate
F 14.22 per 100 workers

Safer than 2% of industry peers

Fatalities
D 0

Safer than 50% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Rising injury rate

X-Cell Tool & Mold, Inc.: 8.6 → 14.2 TCR

Peak year 2020 @ 14.2 TCR · DART/TCR 1.25× in 2020

X-Cell Tool & Mold, Inc.'s TCR rose 5.6 from 8.6 in 2019 to 14.2 in 2020. In 2020, DART was 1.25× this establishment's average TCR (severity share of cases).

OSHA ITA Form 300A scorecard

Establishment book 333511 · Fairview, PA ABOVE-IND · SMALL

Grade F · TCR 11.4 · 346% of ind

  • DART 14.2 DART
  • RANK #12/14
  • PHOTO Delco LLC
  • BOOK 2y book
  • INJ 11 inj
  • SIZE ~52 FTE

Nearest TCR peer: Delco LLC (0.1 TCR gap)

Read with this employer → · Industry book → · Pennsylvania employers → · Look up another →

X-Cell Tool & Mold, Inc. in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows X-Cell Tool & Mold, Inc. averages 11.4 TCR (346% of the Molds for forming materials (e.g., glass, plastics, rubber) manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

X-Cell Tool & Mold, Inc. TCR series: 2019=8.6 · 2020=14.2 · BLS 3.3

Where X-Cell Tool & Mold, Inc. falls in its industry

216 Molds for forming materials (e establishments

Safer than 8% of graded establishments in this industry, whose median TCR is 3.7.

More dangerous than peersSafer than peers

Narrower to Pennsylvania alone (the establishments it most directly competes with for workers and contracts): ranked #12 safest of 14 Molds for forming materials (e employers in Pennsylvania.

X-Cell Tool & Mold, Inc. (52 employees, TCR 11.4) among 29 same-industry peers, split at the industry median of 53 employees and a TCR of 3.7 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 050100150200 05101520 Average employees Total Case Rate X-Cell Tool & Mold, Inc.
X-Cell Tool & Mold, Inc. (52 employees, TCR 11.4) among 29 same-industry peers, split at the industry median of 53 employees and a TCR of 3.7

X-Cell Tool & Mold, Inc. has fewer employees than the Molds for forming materials (e.g., glass median and a higher injury rate than the industry's median TCR of 3.7. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2020 14.2 14.2 7 0 0
2019 8.6 8.6 4 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

333511 · PA · Fairview

216 Molds for forming materials (e.g., glass, plastics, rubber) manufacturing employers nationwide with a credible TCR · 22,692 rated employers in Pennsylvania with headcount on file · 36 employers in Fairview, PA · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Delco LLC 11.5 TCR
NAICS-TCR Mossberg Industries 11.5 TCR
NAICS-TCR Sunrise Fiberglass LLC 11.3 TCR
NAICS-TCR Kobra Molds LLC 11.2 TCR
STATE-SIZE Farm 52 FTE
STATE-SIZE Maitri Genetics 52 FTE
STATE-SIZE Insa Shamokin Dam 52 FTE
STATE-SIZE Ethos Fairless Hills 52 FTE
CITY-NEAR Parker White Metal Co. 276 FTE
CITY-NEAR PHB Machining & Molding 178 FTE
CITY-NEAR GRIMM INDUSTRIES 176 FTE
CITY-NEAR API Technologies - Fairview Manufacturing 172 FTE
NAT-TCR 1353 - Loves Park Il Whse 11.4 TCR
NAT-TCR Avanti Windows & Doors (Glendale) 11.4 TCR
NAT-TCR Barrett Trailers LLC 11.4 TCR
NAT-TCR Ofa 28 11.4 TCR
NAT-SIZE Iowa Falls Plant 52 FTE
NAT-SIZE City of Waukesha Metro Transit 52 FTE
NAT-SIZE Anilox Roll Company, Inc. 52 FTE
NAT-SIZE Oceano Packing Company 52 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2020, 2019. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.