Cutting dies, metalworking, manufacturing · New Jersey
Zintech, ClearCut DieWorks
Pennsauken, NJ · ~46 workers · 4 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 3.9
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Zintech, ClearCut DieWorks runs at 119% of its industry's injury rate - about level with the typical Cutting dies, metalworking, manufacturing workplace, earning a grade C.
Zintech, ClearCut DieWorks: 3.9 TCR = 119% of Cutting dies, metalworking, manufacturing BLS 3.3 · 4y Form 300A (see methodology below)
Zintech, ClearCut DieWorks safety composite
Zintech, ClearCut DieWorks scores strongest on fatalities (safer than 51% of same-industry peers) and weakest on dart rate (safer than 15%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
34/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- D 3.92 per 100 workers
Safer than 41% of industry peers
- DART rate
- F 3.77 per 100 workers
Safer than 15% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
Zintech, ClearCut DieWorks: 0.0 → 7.5 TCR
Peak year 2023 @ 8.2 TCR · DART/TCR 0.96× in 2024
Zintech, ClearCut DieWorks's TCR rose 7.5 from 0.0 in 2021 to 7.5 in 2024. Peak filing year was 2023 at 8.2 TCR. In 2024, DART was 0.96× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 333514 · Pennsauken, NJ ABOVE-IND · SMALL
Grade C · TCR 3.9 · 119% of ind
- DART 3.8 DART
- RANK #5/6
- PHOTO Tools, Inc.
- BOOK 4y book
- INJ 8 inj
- SIZE ~46 FTE
Nearest TCR peer: Tools, Inc. (0.0 TCR gap)
Read with this employer → · Industry book → · New Jersey employers → · Look up another →
Zintech, ClearCut DieWorks in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- Schoitz Engine
Schoitz Engineering Inc.
4 TCR
- This site
Zintech, ClearCut DieWorks
3.9 TCR
- Tools, Inc.
Tools, Inc.
3.9 TCR
- Multi Precisio
Multi Precision Detail, Inc.
3.9 TCR
- Unique Model,
Unique Model, Inc.
3.9 TCR
What this shows Zintech, ClearCut DieWorks averages 3.9 TCR (119% of the Cutting dies, metalworking, manufacturing BLS benchmark).
Zintech, ClearCut DieWorks TCR series: 2021=0 · 2022=0 · 2023=8.2 · 2024=7.5 · BLS 3.3
Where Zintech, ClearCut DieWorks falls in its industry
387 Cutting dies, metalworking, ma establishmentsSafer than 41% of graded establishments in this industry, whose median TCR is 3.4.
Narrower to New Jersey alone (the establishments it most directly competes with for workers and contracts): ranked #5 safest of 6 Cutting dies, metalworking, ma employers in New Jersey.
Zintech, ClearCut DieWorks has fewer employees than the Cutting dies, metalworking, manufacturin median and a higher injury rate than the industry's median TCR of 3.4. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 7.5 | 3.8 | 4 | 0 | 0 |
| 2023 | 8.2 | 6.1 | 4 | 0 | 0 |
| 2022 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2021 | 0.0 | 0.0 | 0 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
333514 · NJ · Pennsauken
387 Cutting dies, metalworking, manufacturing employers nationwide with a credible TCR · 11,201 rated employers in New Jersey with headcount on file · 110 employers in Pennsauken, NJ · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Tools, Inc. | 3.9 TCR |
| NAICS-TCR | Multi Precision Detail, Inc. | 3.9 TCR |
| NAICS-TCR | Unique Model, Inc. | 3.9 TCR |
| NAICS-TCR | Schoitz Engineering Inc. | 4.0 TCR |
| STATE-SIZE | Holland Greenhouses Inc. | 46 FTE |
| STATE-SIZE | WATERFORD | 46 FTE |
| STATE-SIZE | New Jersey American Water - Monmouth Production | 46 FTE |
| STATE-SIZE | NJ Division Freehold | 46 FTE |
| CITY-NEAR | J&J Snack Foods | 528 FTE |
| CITY-NEAR | 1964-00010110 | 366 FTE |
| CITY-NEAR | AVL - NJ Headquarters | 323 FTE |
| CITY-NEAR | DIY - NJ Headquarters | 298 FTE |
| NAT-TCR | Winchester Hospital | 3.9 TCR |
| NAT-TCR | Stony Creek Metropark | 3.9 TCR |
| NAT-TCR | Trinity Services Group - WA Pierce County | 3.9 TCR |
| NAT-TCR | Pocatello ID Truss | 3.9 TCR |
| NAT-SIZE | Southern Core Recycling | 46 FTE |
| NAT-SIZE | Amazon.com Services LLC - HJX1 | 46 FTE |
| NAT-SIZE | Xcavators, Inc. | 46 FTE |
| NAT-SIZE | Great Hill Hose Fire Department | 46 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.