State profile · OSHA ITA

Alabama workplace safety

How 7,418 OSHA-reporting employers across Alabama compare on workplace injuries, 2016–2024. Average TCR uses the 6,438 establishments with a credible rate (see methodology).

7,418
Employers
4.7
Avg TCR (rated)
122,249
Injuries (all)
151
Fatalities (all)

TCR, interpreted

Far above average

4.7 avg TCR

Alabama vs all states by OSHA-reporting employer count

Where this state's ITA establishment inventory sits among every tracked state and territory (coverage signal, not a safety ranking)

7,418 25th of 54 higher than 29 of 54 states

States and territories, banded by OSHA ITA reporting employer count

Each bar is a band; taller bars hold more states. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count and share, and where it sits relative to this entry.

Source official public datasets · 2026

The state picture

Alabama's 6,438 rated reporting employers average 4.7 recordable injuries per 100 workers, 1.7 times the ~2.7 all-industry private-sector norm.

4.7
avg TCR · rated subset
6,438
rated employers
7,418
all reporting employers
122,249
recordable injuries (all)

Inventory counts and injury/fatality totals cover all 7,418 ITA establishments; the average TCR excludes zero-rate and corrupt-hours filings. See Methodology → Three Populations.

Alabama grade distribution 7,416 graded establishments · width = share

18% of Alabama's reporting establishments earn an F and 18% an A, each measured against its own industry benchmark, not the state line. These grades are a transparent derived index, not an official OSHA rating; see the Methodology for the exact formula.

Where Alabama ranks among states

54 states & territories by avg TCR

Alabama's average TCR of 4.7 is lower than 75% of states, a state average reflects industry mix as much as workplace safety.

Higher avg TCRLower avg TCR

A second cut tells a different story: ranked by rated-subset injury rate alone, Alabama is #14 of 54. Ranked instead by fatalities per rated employer establishment (same 6,438-employer subset), it's #51 of 54, a 37-place swing. A state can run a moderate everyday injury rate while its rarer, most severe incidents cluster differently; the two metrics measure different things on the same population and shouldn't be read as interchangeable.

How Alabama Workplaces Compare

Alabama hosts 7,418 employer establishments currently reporting to OSHA's Injury Tracking Application. These are not small shops: federal rules require ITA submission from workplaces with 250+ employees in any industry, plus workplaces with 20+ employees in the roughly 60 NAICS codes classified as high-hazard (construction, manufacturing, healthcare, warehousing, agriculture, and others). Across this Alabama cohort, workers have logged 122,249 recordable injuries. The published state average Total Case Rate (TCR) of 4.7 injuries per 100 full-time workers uses the 6,438 establishments with a credible rate (zero-rate and corrupt-hours filings stay in the inventory counts above but are excluded from the average, see methodology).

The state has recorded 151 workplace fatalities in the reporting window, which is tracked separately from non-fatal injury counts because fatal events have their own investigation trail under 29 CFR 1904.39. Reading state-level TCR requires context: the headline figure is driven by a state's industry mix. A state with a heavy construction, logging, or meatpacking footprint will mechanically post higher TCR than a state dominated by finance or professional services, even when individual employers are equally well-managed. That is why the employer table below sorts each establishment by its own TCR and letter grade, against the BLS benchmark for its specific industry, not against the state average.

For jobseekers, relocators, investors, and local safety professionals, state-level pages function as an entry point: use the grade-sorted list to spot the safest and highest-risk employers in Alabama, then click through to an individual establishment for its year-by-year injury, illness, DART, and fatality trajectory. Compare multiple years before drawing conclusions, a single outlier year can reflect a specific event, whereas a sustained pattern across reporting cycles is a more reliable risk signal. All data comes directly from employer-submitted OSHA Form 300A summaries. State OSHA plans in 22 states operate their own enforcement programs in parallel, but the injury data above is harmonized through the federal ITA system.

Employers in Alabama, by injury rate

Page 103 of 149
EmployerCityIndustryGradeAvg TCR
BM4PrattvilleMechanical contractorsB1.7
Store 1691NorthportSupermarkets and other groceA1.7
011-00310LanettSupermarkets and Other GroceA1.7
SA Recycling, Birmingham-Non FerrousBirminghamMetal scrap and waste merchaB1.7
Crossroads IGA #760MadisonGrocery storesA1.7
Aptar CSP Technologies 2489AuburnCups, plastics (except foam)B1.7
Alexander City TerminalAlexander CityDry bulk trucking (except gaA1.7
Koorsen Fire & Security HuntsvilleHuntsvillePlumbing contractorsB1.7
West Fraser Lumber MillMaplesvilleDimension lumber, made from B1.7
DoublebackJacksonTrucking, general freight, lA1.7
Equity Group Eufaula Division LLCBaker HillPoultry slaughtering, dressiB1.7
Atmore PlantAtmoreCarpets and rugs made from tB1.7
001m - Montgomery Al RntlMontgomeryIndustrial LaunderersB1.7
Franklin Electric CooperativeRussellvilleDistribution of electric powD1.7
1911 US HWY 31 South, Athens, AL 35611AthensGrading construction sitesB1.7
Threaded Fasteners, Inc. (Mobile)MobileBolt, Nut, Screw, Rivet, andB1.7
STR0423HuntsvilleDepartment stores except disA1.7
Marshall Dekalb Electric CoopBoazElectric power distribution D1.7
Airbus U.S. Manufacturing Facility - Final Assembly LineMobileAircraft manufacturingB1.7
Southern Field EECLuverneConstruction machinery and eB1.7
Southern Heat Exchanger CorporationTuscsaloosaAftercoolers (i.e., heat excB1.7
Unit # 1170OxfordRetailA1.7
Prairie Tank and Construction Co.Pell CityTanks, heavy gauge metal, maA1.6
1079HartselleAutomotive Parts and AccessoA1.6
18177080 18177080-Mwi - BirminghamPelhamVeterinarians' equipment andB1.6
Unlimited Contract Services RobertsdaleRobertsdaleEgg ProductionA1.6
Wm 5653Orange Beach-A1.6
Wm 6806Cullman-A1.6
026-00552HuntsvilleRetail grocery not includingA1.6
Chapman Canopy, Inc.HueytownStructural steel erecting orB1.6
BirminghamIrondaleStreet cleaning serviceA1.6
Dunn Construction Company, Inc.BirminghamResurfacing, highway, road, B1.6
Proshot Concrete, IncFlorenceConstructionB1.6
Mobis US. AlabamaMccallaChassis, automobile, manufacA1.6
GARDENDALE_1364434GardendaleMail and Parcel DeliveryA1.6
Aerospace Coatings International, Inc.OxfordElectroplating metals and foA1.6
MadisonMadisonautomotive body paint and inB1.6
Rehab Technologies, LLCHuntsville-B1.6
1915-5200XBirminghamOffice Equipment Merchant WhB1.6
Anniston 394AnnistonCable broadcasting networksF1.6
QSI-RussellvilleRussellvilleBuilding cleaning services, A1.6
Brookdale FlorenceFlorenceAssisted-living facilities wA1.6
LanettLanett-A1.6
CMC Steel AlabamaBirminghamElectrometallurgical ferroalA1.6
Allied Steel CorporationSaralandOrnamental metalwork manufacA1.6
960 West VeteransAuburnBottle caps and lids, plastiA1.6
1599 Lowe S of S.W. Mobile AlMobileHomecenterA1.6
American Foam Cast, IncSylacaugaAluminum foundries (except dA1.6
Fort Rucker Facilities Support ServicesFort RuckerBase facilities operation suB1.6
GadsdenGadsdenManufacturingA1.6
← Prev Page 103 of 149 Next →

Nationwide states with similar injury rates or employer scale

Two PlainSafetyScore-derived peer sets for Alabama: nearest states and territories by rated-subset average Total Case Rate and by OSHA-reporting employer inventory. These are cross-state neighborhoods, not the employer list above.

Similar average TCR

Nearest states by rated-subset Total Case Rate (4.7 here).

Similar employer inventory

Nearest states by reporting employer count (7,418 here).

Look up a Alabama employer → · Compare all states → · How TCR is measured →

Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore

Verify with BLS →

Verify with OSHA →

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.