TCR, interpreted
Far above average
4.6 avg TCR
State profile · OSHA ITA
How 14,941 OSHA-reporting employers across Georgia compare on workplace injuries, 2016–2024. Average TCR uses the 13,047 establishments with a credible rate (see methodology).
TCR, interpreted
Far above average
4.6 avg TCR
Georgia vs all states by OSHA-reporting employer count
Where this state's ITA establishment inventory sits among every tracked state and territory (coverage signal, not a safety ranking)
14,941 11th of 54 higher than 43 of 54 states
States and territories, banded by OSHA ITA reporting employer count
Each bar is a band; taller bars hold more states. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count and share, and where it sits relative to this entry.
Source official public datasets · 2026
The state picture
Georgia's 13,047 rated reporting employers average 4.6 recordable injuries per 100 workers, 1.7 times the ~2.7 all-industry private-sector norm.
Inventory counts and injury/fatality totals cover all 14,941 ITA establishments; the average TCR excludes zero-rate and corrupt-hours filings. See Methodology → Three Populations.
18% of Georgia's reporting establishments earn an F and 19% an A, each measured against its own industry benchmark, not the state line. These grades are a transparent derived index, not an official OSHA rating; see the Methodology for the exact formula.
Georgia's average TCR of 4.6 is lower than 81% of states, a state average reflects industry mix as much as workplace safety.
A second cut tells a different story: ranked by rated-subset injury rate alone, Georgia is #11 of 54. Ranked instead by fatalities per rated employer establishment (same 13,047-employer subset), it's #35 of 54, a 24-place swing. A state can run a moderate everyday injury rate while its rarer, most severe incidents cluster differently; the two metrics measure different things on the same population and shouldn't be read as interchangeable.
Georgia hosts 14,941 employer establishments currently reporting to OSHA's Injury Tracking Application. These are not small shops: federal rules require ITA submission from workplaces with 250+ employees in any industry, plus workplaces with 20+ employees in the roughly 60 NAICS codes classified as high-hazard (construction, manufacturing, healthcare, warehousing, agriculture, and others). Across this Georgia cohort, workers have logged 273,626 recordable injuries. The published state average Total Case Rate (TCR) of 4.6 injuries per 100 full-time workers uses the 13,047 establishments with a credible rate (zero-rate and corrupt-hours filings stay in the inventory counts above but are excluded from the average, see methodology).
The state has recorded 201 workplace fatalities in the reporting window, which is tracked separately from non-fatal injury counts because fatal events have their own investigation trail under 29 CFR 1904.39. Reading state-level TCR requires context: the headline figure is driven by a state's industry mix. A state with a heavy construction, logging, or meatpacking footprint will mechanically post higher TCR than a state dominated by finance or professional services, even when individual employers are equally well-managed. That is why the employer table below sorts each establishment by its own TCR and letter grade, against the BLS benchmark for its specific industry, not against the state average.
For jobseekers, relocators, investors, and local safety professionals, state-level pages function as an entry point: use the grade-sorted list to spot the safest and highest-risk employers in Georgia, then click through to an individual establishment for its year-by-year injury, illness, DART, and fatality trajectory. Compare multiple years before drawing conclusions, a single outlier year can reflect a specific event, whereas a sustained pattern across reporting cycles is a more reliable risk signal. All data comes directly from employer-submitted OSHA Form 300A summaries. State OSHA plans in 22 states operate their own enforcement programs in parallel, but the injury data above is harmonized through the federal ITA system.
| Employer | City | Industry | Grade | Avg TCR |
|---|---|---|---|---|
| KWF GA Buford HomeStore | Buford | Furniture stores (e.g., hous | D | 4.2 |
| Augusta Coating and Manufacturing | Thomson | Coating metals and metal pro | D | 4.1 |
| Quirch Foods - Atlanta | Atlanta | Meats, fresh, merchant whole | D | 4.1 |
| Decatur | Decatur | Offset printing (except book | D | 4.1 |
| 452 Lawrenceville | Lawrenceville | Department Store | D | 4.1 |
| Store 0528 | Augusta | General Merchandise Stores | D | 4.1 |
| Kls (General Mills) | Social Circle | General warehousing and stor | B | 4.1 |
| Atlanta Int. Airport | Hartfield | Airport operators (e.g., civ | C | 4.1 |
| Save A Lot #505 | Dalton | Grocery stores | D | 4.1 |
| Atlanta Ful | Atlanta | Trucking, general freight, l | C | 4.1 |
| KJ's Market #695 | Waynesboro | Grocery stores | D | 4.1 |
| Republic Services of Vidalia 3616 | Vidalia | Waste hauling, local, nonhaz | D | 4.1 |
| DALTON_1360214 | Dalton | Mail and Parcel Delivery | C | 4.1 |
| 1774 Monroe Ga | Monroe | Home Centers | D | 4.1 |
| Wm 588 | Albany | Warehouse Clubs and Supercen | D | 4.1 |
| OTR Wheel Engineering, Inc. | Rome | Truck tires and tubes dealer | D | 4.1 |
| Atlanta | Ellenwood | Building materials, fibergla | D | 4.1 |
| 4551-Carlyle Place Navicent Health | Macon | - | B | 4.1 |
| 120682-Baxley Po | Baxley | Mail and Parcel Delivery | C | 4.1 |
| 127689-Saint Marys Po | Kings Bay | Mail and Parcel Delivery | C | 4.1 |
| HG758 | Gainesville | Homefurnishings stores | D | 4.1 |
| Sodexo at Delta Air Lines-Training Ctr | Atlanta | Building Cleaning/Maintenanc | C | 4.1 |
| 1367 | Warner Robins | Warehouse Clubs and Supercen | D | 4.1 |
| 4021-A567 | Atlanta | Uniform Services | D | 4.1 |
| The Landings of Douglas | Douglas | Assisted-living facilities w | C | 4.1 |
| 011-00652 | Atlanta | Retail grocery not including | D | 4.1 |
| YKK AP America - Residenial | Macon | Awnings, rigid plastics or f | D | 4.1 |
| Americold Gadsden, AL | Atlanta | Cold storage warehousing | B | 4.1 |
| IFS Dalton | Dalton | - | D | 4.1 |
| Arrow Exterminators 1032 | Macon | 561710 Exterminating and Pes | C | 4.1 |
| Arrow Exterminators 1019 | Alpharetta | 561710 Exterminating and Pes | C | 4.1 |
| Wm 4616 | Cleveland | Warehouse Clubs and Supercen | D | 4.1 |
| Wayfield Foods Store 19 | Atlanta | Grocery stores | D | 4.1 |
| Tie Down Engineering | Atlanta | Fabricated structural metal | D | 4.1 |
| Brasington Bailey Construction, Inc | Cartersville | Drywall contractors | D | 4.1 |
| Dallas Millworks | Hiram | Millwork | D | 4.1 |
| Laddawn Atlanta | Atlanta | Bags, plastics film, single | D | 4.1 |
| 12893 | Alpharetta | - | F | 4.1 |
| Main | Cartersville | Service station construction | D | 4.1 |
| Rath Inc., Milledgeville Facility | Milledgeville | Bricks, clay refractory, man | D | 4.1 |
| IBP of Savannah | Pooler | - | D | 4.1 |
| R&D Maintenance Services, Inc. (HART) | Hartwell | Government base facilities o | D | 4.1 |
| 9215-ATL | Hapeville | Ground Handler | C | 4.1 |
| Ryerson - RMP Atlanta | Norcross | Pipe, metal, merchant wholes | D | 4.1 |
| 1033 - Douglasville | Douglasville | - | D | 4.1 |
| Atlanta RDC | Atlanta | General warehousing and stor | B | 4.1 |
| 629 629 Atlanta | Atlanta | Department Stores | D | 4.1 |
| 605 | Savannah | Warehouse Clubs and Supercen | D | 4.1 |
| Capitol - Palmetto | Palmetto | Drywall and related building | D | 4.1 |
| Maysville feed mill | Maysville | - | C | 4.1 |
Two PlainSafetyScore-derived peer sets for Georgia: nearest states and territories by rated-subset average Total Case Rate and by OSHA-reporting employer inventory. These are cross-state neighborhoods, not the employer list above.
Nearest states by rated-subset Total Case Rate (4.6 here).
Nearest states by reporting employer count (14,941 here).
Look up a Georgia employer → · Compare all states → · How TCR is measured →
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.