Industrial machinery and equipment (except electrical) merchant wholesalers · Texas
508 ~ Waukesha Pearce Industries Tomball, Texas
Tomball, TX · ~20 workers · 4 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 4.0
- Avg TCR
- 2.2
- Industry avg
- 0
- Fatalities
The verdict
508 ~ Waukesha Pearce Industries Tomball, Texas runs at 183% of its industry's injury rate - more dangerous than the typical Industrial machinery and equipment (except electrical) merchant wholesalers workplace, earning a grade D.
- D
- Poor Safety Record
- 4.0
- avg TCR · per 100 workers
- 2.2
- industry benchmark (BLS)
- 4
- recordable injuries tracked
Grade compares 508 ~ Waukesha Pearce Industries Tomball, Texas's OSHA Total Case Rate of 4.0 to the Industrial machinery and equipment (except electrical) merchant wholesalers BLS benchmark of 2.2 (183% of benchmark) across 4 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
508 ~ Waukesha Pearce Industries Tomball, Texas's yearly Total Case Rate, against the 2.2 industry benchmark.
Where 508 ~ Waukesha Pearce Industries Tomball, Texas falls in its industry
1,175 Industrial machinery and equip establishmentsSafer than 21% of graded establishments in this industry, whose median TCR is 1.8.
Narrower to Texas alone (the establishments it most directly competes with for workers and contracts): ranked #154 safest of 174 Industrial machinery and equip employers in Texas.
Trend analysis for 508 ~ Waukesha Pearce Industries Tomball, Texas
Between 2016 and 2019, 508 ~ Waukesha Pearce Industries Tomball, Texas's Total Case Rate held roughly steady from 0.0 to 7.3 recordable injuries per 100 full-time workers, a 0% change across 3 years of OSHA reporting.
The safest year on record was 2016, at a TCR of 0.0, while 2018 saw the highest rate, at 8.8, a spread of 8.8 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 4 reporting years, 508 ~ Waukesha Pearce Industries Tomball, Texas recorded 4 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 4-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 4 injuries shown on this page for 508 ~ Waukesha Pearce Industries Tomball, Texas are sourced from its own 4 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 423830 - Industrial machinery and equipment (except electrical) merchant wholesalers.
DART Rate, Transparent Calculation (2019)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
0 DART incidents × 200,000 ÷ 54,553 hours worked = 0.00 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| 508 ~ Waukesha Pearce Industries Tomball, Texas (this establishment) | 4.03 | OSHA ITA Form 300A, 4-year avg |
| Industrial machinery and equipment (except electrical) merchant wholesalers industry avg | 2.20 | BLS IIF, NAICS 423830 |
| Texas state avg (all industries) | 3.73 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by 508 ~ Waukesha Pearce Industries Tomball, Texas to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2019: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2018: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2019 | 7.3 | 0.0 | 2 | 0 | 0 |
| 2018 | 8.8 | 8.8 | 2 | 0 | 0 |
| 2017 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2016 | 0.0 | 0.0 | 0 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on 508 ~ Waukesha Pearce Industries Tomball, Texas's reported OSHA injury record versus its Industrial machinery and equipment (except electrical) merchant wholesalers peers, not a verdict on whether any single site is safe today.
- At 183% of the Industrial machinery and equipment (except electrical) merchant wholesalers benchmark, 508 ~ Waukesha Pearce Industries Tomball, Texas reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Industrial machinery and equipment (except electrical) merchant wholesalers sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is 508 ~ Waukesha Pearce Industries Tomball, Texas's safety grade?
How many injuries has 508 ~ Waukesha Pearce Industries Tomball, Texas reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Texas, and by nearby establishments in Tomball - a different peer set than the category browse links below.
Similar TCR (~4.0)
Similar size (~20 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.