Pipe, rigid plastics, manufacturing · Pennsylvania
ADS Muncy
Muncy, PA · ~106 workers · 3 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 5.5
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
ADS Muncy runs at 167% of its industry's injury rate - more dangerous than the typical Pipe, rigid plastics, manufacturing workplace, earning a grade D.
- D
- Poor Safety Record
- 5.5
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 16
- recordable injuries tracked
Grade compares ADS Muncy's OSHA Total Case Rate of 5.5 to the Pipe, rigid plastics, manufacturing BLS benchmark of 3.3 (167% of benchmark) across 3 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
ADS Muncy's yearly Total Case Rate, against the 3.3 industry benchmark.
Where ADS Muncy falls in its industry
361 Pipe, rigid plastics, manufact establishmentsSafer than 27% of graded establishments in this industry, whose median TCR is 3.3.
Narrower to Pennsylvania alone (the establishments it most directly competes with for workers and contracts): ranked #13 safest of 15 Pipe, rigid plastics, manufact employers in Pennsylvania.
Trend analysis for ADS Muncy
Between 2016 and 2018, ADS Muncy's Total Case Rate worsened from 1.8 to 3.5 recordable injuries per 100 full-time workers, a 93% increase across 2 years of OSHA reporting.
The safest year on record was 2016, at a TCR of 1.8, while 2017 saw the highest rate, at 11.3, a spread of 9.5 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 3 reporting years, ADS Muncy recorded 16 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 3-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 16 injuries, 2 illnesses shown on this page for ADS Muncy are sourced from its own 3 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 326122 - Pipe, rigid plastics, manufacturing.
DART Rate, Transparent Calculation (2018)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
0 DART incidents × 200,000 ÷ 230,486 hours worked = 0.00 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| ADS Muncy (this establishment) | 5.52 | OSHA ITA Form 300A, 3-year avg |
| Pipe fittings, rigid plastics, manufacturing industry avg | 3.30 | BLS IIF, NAICS 326122 |
| Pennsylvania state avg (all industries) | 5.06 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by ADS Muncy to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2018: 4 reportable incidents · 2 injuries, 2 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 12 reportable incidents · 12 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2018 | 3.5 | 0.0 | 2 | 2 | 0 |
| 2017 | 11.3 | 10.3 | 12 | 0 | 0 |
| 2016 | 1.8 | 1.8 | 2 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on ADS Muncy's reported OSHA injury record versus its Pipe, rigid plastics, manufacturing peers, not a verdict on whether any single site is safe today.
- At 167% of the Pipe, rigid plastics, manufacturing benchmark, ADS Muncy reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Pipe, rigid plastics, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is ADS Muncy's safety grade?
How many injuries has ADS Muncy reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Pennsylvania, and by nearby establishments in Muncy - a different peer set than the category browse links below.
Similar TCR (~5.5)
Similar size (~106 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.