MEAT PROCESSING · New Jersey
Al John Inc
West Caldwell, NJ · ~374 workers · 6 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 8.9
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Al John Inc runs at 271% of its industry's injury rate - far more dangerous than the typical MEAT PROCESSING workplace, earning a grade F.
- F
- Failing Safety Record
- 8.9
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 180
- recordable injuries tracked
Grade compares Al John Inc's OSHA Total Case Rate of 8.9 to the MEAT PROCESSING BLS benchmark of 3.3 (271% of benchmark) across 6 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Al John Inc's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Al John Inc falls in its industry
631 MEAT PROCESSING establishmentsSafer than 14% of graded establishments in this industry, whose median TCR is 4.4.
Narrower to New Jersey alone (the establishments it most directly competes with for workers and contracts): ranked #11 safest of 14 MEAT PROCESSING employers in New Jersey.
Trend analysis for Al John Inc
Between 2019 and 2024, Al John Inc's Total Case Rate improved from 10.4 to 8.9 recordable injuries per 100 full-time workers, a 14% decrease across 5 years of OSHA reporting.
The safest year on record was 2022, at a TCR of 5.8, while 2020 saw the highest rate, at 10.8, a spread of 5.0 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 6 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 6 reporting years, Al John Inc recorded 180 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 6-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 180 injuries, 31 illnesses shown on this page for Al John Inc are sourced from its own 6 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 311612 - MEAT PROCESSING.
DART Rate, Transparent Calculation (2024)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
24 DART incidents × 200,000 ÷ 831,239 hours worked = 5.77 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Al John Inc (this establishment) | 8.94 | OSHA ITA Form 300A, 6-year avg |
| Meats, fresh or chilled (except poultry and small game), frozen, made from purchased carcasses industry avg | 3.30 | BLS IIF, NAICS 311612 |
| New Jersey state avg (all industries) | 4.90 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Al John Inc to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 37 reportable incidents · 28 injuries, 9 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 38 reportable incidents · 27 injuries, 11 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2022: 25 reportable incidents · 25 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2021: 35 reportable incidents · 31 injuries, 4 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 40 reportable incidents · 38 injuries, 2 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 36 reportable incidents · 31 injuries, 5 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 8.9 | 5.8 | 28 | 9 | 0 |
| 2023 | 8.7 | 6.2 | 27 | 11 | 0 |
| 2022 | 5.8 | 5.3 | 25 | 0 | 0 |
| 2021 | 9.2 | 8.1 | 31 | 4 | 0 |
| 2020 | 10.8 | 9.7 | 38 | 2 | 0 |
| 2019 | 10.4 | 9.3 | 31 | 5 | 0 |
What this grade means for you
Use this grade as a relative read on Al John Inc's reported OSHA injury record versus its MEAT PROCESSING peers, not a verdict on whether any single site is safe today.
- At 271% of the MEAT PROCESSING benchmark, Al John Inc reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider MEAT PROCESSING sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Al John Inc's safety grade?
How many injuries has Al John Inc reported?
Similar Employers
Matched by safety record across the industry, by workforce size within New Jersey, and by nearby establishments in West Caldwell - a different peer set than the category browse links below.
Similar TCR (~8.9)
Similar size (~374 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.