Blown-in insulation (e.g., cellulose, vermiculite) installation · South Carolina
All In One Insulation
Greenville, SC · ~46 workers · 2 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 2.1
- Avg TCR
- 2.8
- Industry avg
- 0
- Fatalities
The verdict
All In One Insulation runs at 74% of its industry's injury rate - safer than the typical Blown-in insulation (e.g., cellulose, vermiculite) installation workplace, earning a grade B.
- B
- Good Safety Record
- 2.1
- avg TCR · per 100 workers
- 2.8
- industry benchmark (BLS)
- 2
- recordable injuries tracked
Grade compares All In One Insulation's OSHA Total Case Rate of 2.1 to the Blown-in insulation (e.g., cellulose, vermiculite) installation BLS benchmark of 2.8 (74% of benchmark) across 2 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
All In One Insulation's yearly Total Case Rate, against the 2.8 industry benchmark.
Where All In One Insulation falls in its industry
1,806 Blown-in insulation (e.g., cel establishmentsSafer than 64% of graded establishments in this industry, whose median TCR is 3.0.
Narrower to South Carolina alone (the establishments it most directly competes with for workers and contracts): ranked #10 safest of 25 Blown-in insulation (e.g., cel employers in South Carolina.
Trend analysis for All In One Insulation
Between 2019 and 2020, All In One Insulation's Total Case Rate improved from 2.5 to 1.7 recordable injuries per 100 full-time workers, a 30% decrease across 1 year of OSHA reporting.
The safest year on record was 2020, at a TCR of 1.7, while 2019 saw the highest rate, at 2.5, a spread of 0.7 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 2 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 2 reporting years, All In One Insulation recorded 2 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 2 injuries shown on this page for All In One Insulation are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 238310 - Blown-in insulation (e.g., cellulose, vermiculite) installation.
DART Rate, Transparent Calculation (2020)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
1 DART incidents × 200,000 ÷ 116,688 hours worked = 1.71 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| All In One Insulation (this establishment) | 2.08 | OSHA ITA Form 300A, 2-year avg |
| Building insulation contractors industry avg | 2.80 | BLS IIF, NAICS 238310 |
| South Carolina state avg (all industries) | 4.08 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by All In One Insulation to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2020: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2020 | 1.7 | 1.7 | 1 | 0 | 0 |
| 2019 | 2.5 | 2.5 | 1 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on All In One Insulation's reported OSHA injury record, strong versus its Blown-in insulation (e.g., cellulose, vermiculite) installation peers, but not a guarantee about any single site today.
- At 74% of the Blown-in insulation (e.g., cellulose, vermiculite) installation benchmark, All In One Insulation reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Blown-in insulation (e.g., cellulose, vermiculite) installation sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is All In One Insulation's safety grade?
How many injuries has All In One Insulation reported?
Similar Employers
Matched by safety record across the industry, by workforce size within South Carolina, and by nearby establishments in Greenville - a different peer set than the category browse links below.
Similar TCR (~2.1)
Similar size (~46 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.