Aluminum die-casting foundries · Michigan

Aludyne Montague, LLC

Montague, MI · ~365 workers · 2 years of OSHA Injury Tracking Application data.

Compiled by PlainSafetyScore Editorial, Employer Workplace Safety Editorial Team

B
Good Safety Record: 2.5
Avg TCR: 3.3
Industry avg: 0
Fatalities

The verdict

Aludyne Montague, LLC runs at 75% of its industry's injury rate - safer than the typical Aluminum die-casting foundries workplace, earning a grade B.

B
Good Safety Record: 2.5
avg TCR · per 100 workers: 3.3
industry benchmark (BLS): 22
recordable injuries tracked

Grade compares Aludyne Montague, LLC's OSHA Total Case Rate to the BLS industry benchmark across 2 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.

Injury rate over time

Aludyne Montague, LLC's yearly Total Case Rate, against the 3.3 industry benchmark.

Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 331523.

Where Aludyne Montague, LLC falls in its industry

223 Aluminum die-casting foundries establishments

Safer than 81% of graded establishments in this industry, whose median TCR is 4.7.

Grade B

More dangerous than peersSafer than peers

Narrower to Michigan alone (the establishments it most directly competes with for workers and contracts): ranked #8 safest of 32 Aluminum die-casting foundries employers in Michigan.

Aludyne Montague, LLC has an average TCR of 2.5, which is 75% of the industry average (3.3) for Aluminum die-casting foundries. This is better than average.

The letter grade is a transparent derived index PlainSafetyScore computes from public OSHA ITA and BLS benchmark data, not an official OSHA rating or safety certification. Full formula and thresholds: Methodology.

Trend analysis for Aludyne Montague, LLC

Between 2021 and 2022, Aludyne Montague, LLC's Total Case Rate improved from 2.6 to 2.3 recordable injuries per 100 full-time workers, a 13% decrease across 1 year of OSHA reporting.

The safest year on record was 2022, at a TCR of 2.3, while 2021 saw the highest rate, at 2.6, a spread of 0.3 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 2 years with a usable rate on file, rather than one outlier year skewing the multi-year average.

Summed across those 2 reporting years, Aludyne Montague, LLC recorded 22 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

All injury, illness, and fatality figures on this page are sourced from Aludyne Montague, LLC's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 331523 - Aluminum die-casting foundries.

DART Rate, Transparent Calculation (2022)

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

4 DART incidents × 200,000 ÷ 1,047,914 hours worked = 0.76 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark	TCR	Source
Aludyne Montague, LLC (this establishment)	2.46	OSHA ITA Form 300A, 2-year avg
Aluminum die-castings, unfinished, manufacturing industry avg	3.30	BLS IIF, NAICS 331523
Michigan state avg (all industries)	4.73	OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Aludyne Montague, LLC to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

2022: 12 reportable incidents · 10 injuries, 2 illnesses, 0 fatalities - OSHA inspection records (case numbers)
2021: 12 reportable incidents · 12 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year	TCR	DART	Injuries	Illnesses	Fatalities
2022	2.3	0.8	10	2	0
2021	2.6	2.0	12	0	0

What this grade means for you

Use this grade as a relative read on Aludyne Montague, LLC's reported OSHA injury record, strong versus its Aluminum die-casting foundries peers, but not a guarantee about any single site today.

At 75% of the Aluminum die-casting foundries benchmark, Aludyne Montague, LLC reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
Judge this record against the wider Aluminum die-casting foundries sector, where injury rates vary widely, before comparing it in isolation. See the industry
Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is Aludyne Montague, LLC's safety grade?

Aludyne Montague, LLC has a safety grade of B (Good Safety Record). This grade is based on their average Total Case Rate (TCR) of 2.5 compared to the BLS industry benchmark of 3.3 for Aluminum die-casting foundries.

How many injuries has Aludyne Montague, LLC reported?

Aludyne Montague, LLC has reported 22 total injuries and 0 fatalities across 2 years of OSHA data (2022, 2021). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry and by workforce size within Michigan - a different peer set than the category browse links below.

Similar TCR (~2.5)

Similar size (~365 workers)

Explore More Safety Data

→ More employers in Michigan → Industry: Aluminum die-casting foundries → Safety grades explained → How to check employer safety → Understanding OSHA rates

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2022, 2021. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

All employers → | Rankings →

Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.