332431 Aluminum cans, light gauge metal, manufacturing · Virginia

Ball Aerocan 751 Verona

Verona, VA · ~74 workers · 7 years of OSHA Injury Tracking Application data.

C
Average Safety Record
3.2
Avg TCR
3.3
Industry avg
0
Fatalities

The verdict

Ball Aerocan 751 Verona runs at 98% of its industry's injury rate - about level with the typical 332431 Aluminum cans, light gauge metal, manufacturing workplace, earning a grade C.

C
Average Safety Record
3.2
avg TCR · per 100 workers
3.3
industry benchmark (BLS)
18
recordable injuries tracked

Grade compares Ball Aerocan 751 Verona's OSHA Total Case Rate of 3.2 to the 332431 Aluminum cans, light gauge metal, manufacturing BLS benchmark of 3.3 (98% of benchmark) across 7 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.

Injury rate over time

Ball Aerocan 751 Verona's yearly Total Case Rate, against the 3.3 industry benchmark.

-202468 2017201820192020202120222023 03.3 Industry benchmarkBall Aerocan 751 Verona TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 332431.

Where Ball Aerocan 751 Verona falls in its industry

224 332431 Aluminum cans, light g establishments

Safer than 31% of graded establishments in this industry, whose median TCR is 2.3.

More dangerous than peersSafer than peers

Narrower to Virginia alone (the establishments it most directly competes with for workers and contracts): ranked #6 safest of 7 332431 Aluminum cans, light g employers in Virginia.

Trend analysis for Ball Aerocan 751 Verona

Between 2017 and 2023, Ball Aerocan 751 Verona's Total Case Rate improved from 1.6 to 0.0 recordable injuries per 100 full-time workers, a 100% decrease across 6 years of OSHA reporting.

The safest year on record was 2023, at a TCR of 0.0, while 2021 saw the highest rate, at 6.3, a spread of 6.3 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.

Summed across those 7 reporting years, Ball Aerocan 751 Verona recorded 18 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 7-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

The 18 injuries shown on this page for Ball Aerocan 751 Verona are sourced from its own 7 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 332431 - 332431 Aluminum cans, light gauge metal, manufacturing.

DART Rate, Transparent Calculation (2023)

What is the DART rate formula?

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

0 DART incidents × 200,000 ÷ 117,939 hours worked = 0.00 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
Ball Aerocan 751 Verona (this establishment) 3.24 OSHA ITA Form 300A, 7-year avg
Metal cans, light gauge metal, manufacturing industry avg 3.30 BLS IIF, NAICS 332431
Virginia state avg (all industries) 4.16 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Ball Aerocan 751 Verona to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2023 0.0 0.0 0 0 0
2022 6.2 2.5 5 0 0
2021 6.3 3.8 5 0 0
2020 1.3 1.3 1 0 0
2019 3.6 2.4 3 0 0
2018 3.7 1.2 3 0 0
2017 1.6 0.0 1 0 0

What this grade means for you

Use this grade as a relative read on Ball Aerocan 751 Verona's reported OSHA injury record, strong versus its 332431 Aluminum cans, light gauge metal, manufacturing peers, but not a guarantee about any single site today.

  • At 98% of the 332431 Aluminum cans, light gauge metal, manufacturing benchmark, Ball Aerocan 751 Verona reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
  • Judge this record against the wider 332431 Aluminum cans, light gauge metal, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is Ball Aerocan 751 Verona's safety grade?
Ball Aerocan 751 Verona has a safety grade of C (Average Safety Record). This grade is based on their average Total Case Rate (TCR) of 3.2 compared to the BLS industry benchmark of 3.3 for 332431 Aluminum cans, light gauge metal, manufacturing.
How many injuries has Ball Aerocan 751 Verona reported?
Ball Aerocan 751 Verona has reported 18 total injuries and 0 fatalities across 7 years of OSHA data (2023, 2022, 2021, 2020, 2019, 2018, 2017). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry, by workforce size within Virginia, and by nearby establishments in Verona - a different peer set than the category browse links below.

Similar TCR (~3.2)

Similar size (~74 workers)

Nearby in Verona

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2023, 2022, 2021, 2020, 2019, 2018, 2017. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.