Castings, unfinished iron (e.g., ductile, gray, malleable, semisteel), manufacturing · Alabama
Barry Pattern & Foundry Company Inc.
Birmingham, AL · ~26 workers · 7 years of OSHA Injury Tracking Application data.
- A
- Excellent Safety Record
- 1.4
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Barry Pattern & Foundry Company Inc. runs at 42% of its industry's injury rate - far safer than the typical Castings, unfinished iron (e.g., ductile, gray, malleable, semisteel), manufacturing workplace, earning a grade A.
Barry Pattern & Foundry Company Inc.: 1.4 TCR = 42% of Castings, unfinished iron (e.g., ductile, gray, malleable, semisteel), manufacturing BLS 3.3 · 7y Form 300A (see methodology below)
Barry Pattern & Foundry Company Inc. safety composite
Barry Pattern & Foundry Company Inc. scores strongest on total case rate (tcr) (safer than 97% of same-industry peers) and weakest on fatalities (safer than 52%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
85/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- A 1.39 per 100 workers
Safer than 97% of industry peers
- DART rate
- A 0 per 100 workers
Safer than 94% of industry peers
- Fatalities
- D 0
Safer than 52% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Barry Pattern & Foundry Company Inc. held a steady TCR band
Barry Pattern & Foundry Company Inc.'s TCR held near 0.0 from 0.0 in 2017 to 0.0 in 2023. Peak filing year was 2020 at 5.3 TCR. In 2023, DART was 0× this establishment's average TCR (severity share of cases).
2017=0.0 · 2018=0.0 · 2019=4.4 · 2020=5.3 · 2021=0.0 · 2022=0.0 · 2023=0.0
OSHA ITA Form 300A scorecard
Establishment book 331511 · Birmingham, AL AT/BELOW-IND · SMALL
Grade A · TCR 1.4 · 42% of ind
- DART 0.0 DART
- RANK #2/18
- PHOTO Victaulic - Forks
- BOOK 7y book
- INJ 2 inj
- SIZE ~26 FTE
Nearest TCR peer: Victaulic - Forks (0.0 TCR gap)
Read with this employer → · Industry book → · Alabama employers → · Look up another →
Barry Pattern & Foundry Company Inc. in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Barry Pattern & Foundry Company Inc.
1.4 TCR
- Victaulic - Fo
Victaulic - Forks
1.4 TCR
- Tyler Union An
Tyler Union Anniston
1.4 TCR
- Weil Mclain
Weil Mclain
1.4 TCR
- Urick Ductile
Urick Ductile Solutions
1.4 TCR
What this shows Barry Pattern & Foundry Company Inc. averages 1.4 TCR (42% of the Castings, unfinished iron (e.g., ductile, gray, malleable, semisteel), manufacturing BLS benchmark).
Barry Pattern & Foundry Company Inc. TCR series: 2017=0 · 2018=0 · 2019=4.4 · 2020=5.3 · 2021=0 · 2022=0 · 2023=0 · BLS 3.3
Where Barry Pattern & Foundry Company Inc. falls in its industry
272 Castings, unfinished iron (e.g establishmentsSafer than 97% of graded establishments in this industry, whose median TCR is 7.2.
Narrower to Alabama alone (the establishments it most directly competes with for workers and contracts): ranked #2 safest of 18 Castings, unfinished iron (e.g employers in Alabama.
Barry Pattern & Foundry Company Inc. has fewer employees than the Castings, unfinished iron (e.g., ductile median and a lower injury rate than the industry's median TCR of 7.2. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2023 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2022 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2021 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2020 | 5.3 | 5.3 | 1 | 0 | 0 |
| 2019 | 4.4 | 4.4 | 1 | 0 | 0 |
| 2018 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2017 | 0.0 | 0.0 | 0 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
331511 · AL · Birmingham
272 Castings, unfinished iron (e.g., ductile, gray, malleable, semisteel), manufacturing employers nationwide with a credible TCR · 7,418 rated employers in Alabama with headcount on file · 840 employers in Birmingham, AL · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Victaulic - Forks | 1.4 TCR |
| NAICS-TCR | Tyler Union Anniston | 1.4 TCR |
| NAICS-TCR | Weil Mclain | 1.4 TCR |
| NAICS-TCR | Urick Ductile Solutions | 1.4 TCR |
| STATE-SIZE | Unlimited Contract Services Robertsdale | 26 FTE |
| STATE-SIZE | Mar-Jac Poultry AL, LLC Hatchery | 26 FTE |
| STATE-SIZE | Ashland Breeder and Broiler Dept | 26 FTE |
| STATE-SIZE | Sand Mountain Hatchery | 26 FTE |
| CITY-NEAR | USD | 9,165 FTE |
| CITY-NEAR | CLASSIC FOODS | 9,165 FTE |
| CITY-NEAR | Corporate | 8,650 FTE |
| CITY-NEAR | BIRMINGHAM PACKERS | 8,650 FTE |
| NAT-TCR | Millcreek Gardens LLC | 1.4 TCR |
| NAT-TCR | Warehouse : Corsicana Warehouse | 1.4 TCR |
| NAT-TCR | Sweetwater Construction Corp. | 1.4 TCR |
| NAT-TCR | W Branch/Rose City* | 1.4 TCR |
| NAT-SIZE | Rymes - Hudson | 26 FTE |
| NAT-SIZE | Brindley Construction, LLC | 26 FTE |
| NAT-SIZE | Covington Ladies Home | 26 FTE |
| NAT-SIZE | Western Ave Residence | 26 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.