Nonferrous metals (except aluminum) smelting and refining, primary · New York

Belmont Metals Inc.

Brooklyn, NY · ~59 workers · 8 years of OSHA Injury Tracking Application data.

C
Average Safety Record
3.0
Avg TCR
3.3
Industry avg
0
Fatalities

The verdict

Belmont Metals Inc. runs at 90% of its industry's injury rate - about level with the typical Nonferrous metals (except aluminum) smelting and refining, primary workplace, earning a grade C.

C
Average Safety Record
3.0
avg TCR · per 100 workers
3.3
industry benchmark (BLS)
13
recordable injuries tracked

Grade compares Belmont Metals Inc.'s OSHA Total Case Rate of 3.0 to the Nonferrous metals (except aluminum) smelting and refining, primary BLS benchmark of 3.3 (90% of benchmark) across 8 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.

Injury rate over time

Belmont Metals Inc.'s yearly Total Case Rate, against the 3.3 industry benchmark.

-202468 20162017201820192020202120222023 03.3 Industry benchmarkBelmont Metals Inc. TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 331410.

Where Belmont Metals Inc. falls in its industry

61 Nonferrous metals (except alum establishments

Safer than 52% of graded establishments in this industry, whose median TCR is 3.4.

More dangerous than peersSafer than peers

Trend analysis for Belmont Metals Inc.

Between 2016 and 2023, Belmont Metals Inc.'s Total Case Rate improved from 6.0 to 0.0 recordable injuries per 100 full-time workers, a 100% decrease across 7 years of OSHA reporting.

The safest year on record was 2019, at a TCR of 0.0, while 2016 saw the highest rate, at 6.0, a spread of 6.0 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.

Summed across those 8 reporting years, Belmont Metals Inc. recorded 13 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 8-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

The 13 injuries shown on this page for Belmont Metals Inc. are sourced from its own 8 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 331410 - Nonferrous metals (except aluminum) smelting and refining, primary.

DART Rate, Transparent Calculation (2023)

What is the DART rate formula?

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

0 DART incidents × 200,000 ÷ 112,204 hours worked = 0.00 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
Belmont Metals Inc. (this establishment) 2.97 OSHA ITA Form 300A, 8-year avg
Silver refining, primary industry avg 3.30 BLS IIF, NAICS 331410
New York state avg (all industries) 4.67 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Belmont Metals Inc. to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2023 0.0 0.0 0 0 0
2022 5.0 5.0 3 0 0
2021 5.6 5.6 3 0 0
2020 1.8 1.8 1 0 0
2019 0.0 0.0 0 0 0
2018 3.6 3.6 2 0 0
2017 1.8 1.8 1 0 0
2016 6.0 6.0 3 0 0

What this grade means for you

Use this grade as a relative read on Belmont Metals Inc.'s reported OSHA injury record, strong versus its Nonferrous metals (except aluminum) smelting and refining, primary peers, but not a guarantee about any single site today.

  • At 90% of the Nonferrous metals (except aluminum) smelting and refining, primary benchmark, Belmont Metals Inc. reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
  • Judge this record against the wider Nonferrous metals (except aluminum) smelting and refining, primary sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is Belmont Metals Inc.'s safety grade?
Belmont Metals Inc. has a safety grade of C (Average Safety Record). This grade is based on their average Total Case Rate (TCR) of 3.0 compared to the BLS industry benchmark of 3.3 for Nonferrous metals (except aluminum) smelting and refining, primary.
How many injuries has Belmont Metals Inc. reported?
Belmont Metals Inc. has reported 13 total injuries and 0 fatalities across 8 years of OSHA data (2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry, by workforce size within New York, and by nearby establishments in Brooklyn - a different peer set than the category browse links below.

Similar TCR (~3.0)

Similar size (~59 workers)

Nearby in Brooklyn

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.