fabricated metal product manufacturing · Oklahoma

Cadet Manufacturing Inc

CHOUTEAU, OK · ~35 workers · 3 years of OSHA Injury Tracking Application data.

C
Average Safety Record
3.4
Avg TCR
3.3
Industry avg
0
Fatalities

The verdict

Cadet Manufacturing Inc runs at 103% of its industry's injury rate - about level with the typical fabricated metal product manufacturing workplace, earning a grade C.

C
Average Safety Record
3.4
avg TCR · per 100 workers
3.3
industry benchmark (BLS)
4
recordable injuries tracked

Grade compares Cadet Manufacturing Inc's OSHA Total Case Rate to the BLS industry benchmark across 3 years of Form 300A filings (2016–2024).

Injury rate over time

Cadet Manufacturing Inc's yearly Total Case Rate, against the 3.3 industry benchmark.

Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 332000.

-5051015 201620172023 10.23.3 Industry benchmarkCadet Manufacturing Inc TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 332000.

Cadet Manufacturing Inc has an average TCR of 3.4, which is 103% of the industry average (3.3) for fabricated metal product manufacturing. This is worse than average.

Safety Insights for Cadet Manufacturing Inc

Cadet Manufacturing Inc operates an establishment with approximately 35 full-time equivalent workers in CHOUTEAU, OK, classified under the fabricated metal product manufacturing industry (NAICS 332000). Across 3 years of mandatory OSHA Injury Tracking Application (ITA) reporting, this employer has accumulated 4 recordable injuries, 0 occupational illnesses, and 0 workplace fatalities. The average Total Case Rate (TCR) of 3.4 injuries per 100 full-time workers per year provides the anchor metric for the C letter grade (Average Safety Record).

Benchmarked against the Bureau of Labor Statistics industry average of 3.3 for fabricated metal product manufacturing, Cadet Manufacturing Inc's workforce experiences 103% of the typical injury burden. This ratio matters because TCR already normalizes for hours worked, a 200,000-hour exposure base equals roughly 100 full-time workers, so establishments with very different headcounts can be compared directly. A TCR above the benchmark flags a higher-than-typical risk profile for jobseekers, insurers, and enforcement agencies to examine.

Multi-year trend analysis is the single most reliable signal here: a one-year spike could reflect a single severe event, whereas sustained elevation across 3 reporting cycles points to systemic hazard exposure. Readers evaluating Cadet Manufacturing Inc as an employer, contractor, investment, or regulatory target should examine the yearly DART rate (days away, restricted, or transferred), the fatality count of 0, and any year-over-year deterioration shown in the table below. All figures come directly from employer-submitted OSHA Form 300A summaries, there is no modeling, estimation, or third-party adjustment layered on top of the government data.

Verify This Employer with OSHA

All injury, illness, and fatality figures on this page are sourced from Cadet Manufacturing Inc's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 332000 - fabricated metal product manufacturing.

DART Rate, Transparent Calculation (2023)

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

4 DART incidents × 200,000 ÷ 78,774 hours worked = 10.16 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
Cadet Manufacturing Inc (this establishment) 3.39 OSHA ITA Form 300A, 3-year avg
Fabricated metal product manufacturing industry avg 3.30 BLS IIF, NAICS 332000
Oklahoma state avg (all industries) 4.32 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Cadet Manufacturing Inc to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2023 10.2 10.2 4 0 0
2017 0.0 0.0 0 0 0
2016 0.0 0.0 0 0 0

What this grade means for you

Use this grade as a relative read on Cadet Manufacturing Inc's reported OSHA injury record versus its fabricated metal product manufacturing peers, not a verdict on whether any single site is safe today.

  • At 103% of the fabricated metal product manufacturing benchmark, Cadet Manufacturing Inc reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
  • Judge this record against the wider fabricated metal product manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is Cadet Manufacturing Inc's safety grade?
Cadet Manufacturing Inc has a safety grade of C (Average Safety Record). This grade is based on their average Total Case Rate (TCR) of 3.4 compared to the BLS industry benchmark of 3.3 for fabricated metal product manufacturing.
How is the safety grade calculated?
Safety grades are calculated by comparing an employer's average Total Case Rate (TCR) - the number of workplace injuries and illnesses per 100 full-time workers per year, against the Bureau of Labor Statistics (BLS) industry benchmark. Grade A means significantly below average injury rates; grade F means significantly above average.
How many injuries has Cadet Manufacturing Inc reported?
Cadet Manufacturing Inc has reported 4 total injuries and 0 fatalities across 3 years of OSHA data (2023, 2017, 2016). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.
Where does PlainSafetyScore get its data?
All safety data comes from OSHA's Injury Tracking Application (ITA), which collects mandatory establishment-level injury and illness reports from employers with 250+ employees or those in high-hazard industries. Industry benchmarks are from the Bureau of Labor Statistics (BLS) Injuries, Illnesses, and Fatalities (IIF) program.

Explore More Safety Data

→ More employers in Oklahoma → Industry: fabricated metal product manufacturing → Safety grades explained → How to check employer safety → Understanding OSHA rates
Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2023, 2017, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Related

All employers → | Rankings →
Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial