Motor vehicle moldings and extrusions, plastics, manufacturing · Alabama
Carfair Composites USA Inc.
Anniston, AL · ~68 workers · 7 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 4.4
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Carfair Composites USA Inc. runs at 133% of its industry's injury rate - more dangerous than the typical Motor vehicle moldings and extrusions, plastics, manufacturing workplace, earning a grade D.
Carfair Composites USA Inc.: 4.4 TCR = 133% of Motor vehicle moldings and extrusions, plastics, manufacturing BLS 3.3 · 7y Form 300A (see methodology below)
Carfair Composites USA Inc. safety composite
Carfair Composites USA Inc. scores strongest on fatalities (safer than 50% of same-industry peers) and weakest on dart rate (safer than 28%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
38/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- D 4.38 per 100 workers
Safer than 38% of industry peers
- DART rate
- F 3.41 per 100 workers
Safer than 28% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
TCR Δ
−5.5
2016→2024
Carfair Composites USA Inc. injury rate improved
Carfair Composites USA Inc.'s TCR fell 5.5 from 10.1 in 2016 to 4.5 in 2024. Peak filing year was 2016 at 10.1 TCR. In 2024, DART was 0.78× this establishment's average TCR (severity share of cases).
2016=10.1 · 2019=5.5 · 2020=3.8 · 2021=1.9 · 2022=1.6 · 2023=3.4 · 2024=4.5
OSHA ITA Form 300A scorecard
Establishment book 326199 · Anniston, AL ABOVE-IND · SMALL
Grade D · TCR 4.4 · 133% of ind
- DART 3.4 DART
- RANK #38/65
- PHOTO Mack Molding Company…
- BOOK 7y book
- INJ 18 inj
- SIZE ~68 FTE
Nearest TCR peer: Mack Molding Company - Inman, SC (0.0 TCR gap)
Read with this employer → · Industry book → · Alabama employers → · Look up another →
Carfair Composites USA Inc. in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Carfair Composites USA Inc.
4.4 TCR
- Mack Molding C
Mack Molding Company - Inman, SC
4.4 TCR
- Imco Inc
Imco Inc
4.4 TCR
- ITW Deltar Fas
ITW Deltar Fasteners
4.4 TCR
- Liberty Plasti
Liberty Plastics - Baldwyn, MS
4.4 TCR
What this shows Carfair Composites USA Inc. averages 4.4 TCR (133% of the Motor vehicle moldings and extrusions, plastics, manufacturing BLS benchmark).
Carfair Composites USA Inc. TCR series: 2016=10.1 · 2019=5.5 · 2020=3.8 · 2021=1.9 · 2022=1.6 · 2023=3.4 · 2024=4.5 · BLS 3.3
Where Carfair Composites USA Inc. falls in its industry
2,838 Motor vehicle moldings and ext establishmentsSafer than 38% of graded establishments in this industry, whose median TCR is 3.5.
Narrower to Alabama alone (the establishments it most directly competes with for workers and contracts): ranked #38 safest of 65 Motor vehicle moldings and ext employers in Alabama.
Carfair Composites USA Inc. has fewer employees than the Motor vehicle moldings and extrusions, p median and a higher injury rate than the industry's median TCR of 3.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 4.5 | 3.4 | 4 | 0 | 0 |
| 2023 | 3.4 | 3.4 | 3 | 0 | 0 |
| 2022 | 1.6 | 1.6 | 1 | 0 | 0 |
| 2021 | 1.9 | 1.9 | 1 | 0 | 0 |
| 2020 | 3.8 | 3.8 | 2 | 0 | 0 |
| 2019 | 5.5 | 0.0 | 3 | 0 | 0 |
| 2016 | 10.1 | 0.0 | 4 | 1 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
326199 · AL · Anniston
2,838 Motor vehicle moldings and extrusions, plastics, manufacturing employers nationwide with a credible TCR · 7,418 rated employers in Alabama with headcount on file · 101 employers in Anniston, AL · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Mack Molding Company - Inman, SC | 4.4 TCR |
| NAICS-TCR | Imco Inc | 4.4 TCR |
| NAICS-TCR | ITW Deltar Fasteners | 4.4 TCR |
| NAICS-TCR | Liberty Plastics - Baldwyn, MS | 4.4 TCR |
| STATE-SIZE | Pea River Electric Cooperative | 68 FTE |
| STATE-SIZE | LSAM Pan Line I | 68 FTE |
| STATE-SIZE | Hagan Fences | 68 FTE |
| STATE-SIZE | Ben Mar Hosiery Inc. | 68 FTE |
| CITY-NEAR | Tyler Union | 432 FTE |
| CITY-NEAR | Tyler Union Anniston | 420 FTE |
| CITY-NEAR | International Automotive Components | 346 FTE |
| CITY-NEAR | International Automotive Components Anniston | 344 FTE |
| NAT-TCR | Finnco Services | 4.4 TCR |
| NAT-TCR | Baxter Kenworthy Electric, Inc | 4.4 TCR |
| NAT-TCR | 735 - Wilkes-Barre | 4.4 TCR |
| NAT-TCR | Redner's Fresh Market Audubon | 4.4 TCR |
| NAT-SIZE | 6730 Redeker Place- Los Angeles area | 68 FTE |
| NAT-SIZE | STS Operating - Hope Group | 68 FTE |
| NAT-SIZE | Northwoods Mfg Inc | 68 FTE |
| NAT-SIZE | Raytheon_Dallas_8121 Lemmon Av_TX | 68 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.