Hot forgings made from purchased nonferrous metals, unfinished · Virginia
Cerro Fabricated Products LLC
WEYERS CAVE, VA · ~126 workers · 3 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 2.1
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Cerro Fabricated Products LLC runs at 64% of its industry's injury rate - safer than the typical Hot forgings made from purchased nonferrous metals, unfinished workplace, earning a grade B.
- B
- Good Safety Record
- 2.1
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 9
- recordable injuries tracked
Grade compares Cerro Fabricated Products LLC's OSHA Total Case Rate to the BLS industry benchmark across 3 years of Form 300A filings (2016–2024).
Injury rate over time
Cerro Fabricated Products LLC's yearly Total Case Rate, against the 3.3 industry benchmark.
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 332112.
Where Cerro Fabricated Products LLC falls in its industry
66 Hot forgings made from purchas establishmentsSafer than 77% of graded establishments in this industry, whose median TCR is 4.3.
Cerro Fabricated Products LLC has an average TCR of 2.1, which is 64% of the industry average (3.3) for Hot forgings made from purchased nonferrous metals, unfinished. This is better than average.
Safety Insights for Cerro Fabricated Products LLC
Cerro Fabricated Products LLC operates an establishment with approximately 126 full-time equivalent workers in WEYERS CAVE, VA, classified under the Hot forgings made from purchased nonferrous metals, unfinished industry (NAICS 332112). Across 3 years of mandatory OSHA Injury Tracking Application (ITA) reporting, this employer has accumulated 9 recordable injuries, 1 occupational illnesses, and 0 workplace fatalities. The average Total Case Rate (TCR) of 2.1 injuries per 100 full-time workers per year provides the anchor metric for the B letter grade (Good Safety Record).
Benchmarked against the Bureau of Labor Statistics industry average of 3.3 for Hot forgings made from purchased nonferrous metals, unfinished, Cerro Fabricated Products LLC's workforce experiences 64% of the typical injury burden. This ratio matters because TCR already normalizes for hours worked, a 200,000-hour exposure base equals roughly 100 full-time workers, so establishments with very different headcounts can be compared directly. A TCR below the benchmark signals that controls, training, or automation may be outperforming peers.
Multi-year trend analysis is the single most reliable signal here: a one-year spike could reflect a single severe event, whereas sustained elevation across 3 reporting cycles points to systemic hazard exposure. Readers evaluating Cerro Fabricated Products LLC as an employer, contractor, investment, or regulatory target should examine the yearly DART rate (days away, restricted, or transferred), the fatality count of 0, and any year-over-year deterioration shown in the table below. All figures come directly from employer-submitted OSHA Form 300A summaries, there is no modeling, estimation, or third-party adjustment layered on top of the government data.
Verify This Employer with OSHA
All injury, illness, and fatality figures on this page are sourced from Cerro Fabricated Products LLC's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 332112 - Hot forgings made from purchased nonferrous metals, unfinished.
DART Rate, Transparent Calculation (2018)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
0 DART incidents × 200,000 ÷ 244,114 hours worked = 0.00 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Cerro Fabricated Products LLC (this establishment) | 2.12 | OSHA ITA Form 300A, 3-year avg |
| Aluminum forgings made from purchased metals, unfinished industry avg | 3.30 | BLS IIF, NAICS 332112 |
| Virginia state avg (all industries) | 4.16 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Cerro Fabricated Products LLC to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2018: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 2 reportable incidents · 1 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 8 reportable incidents · 8 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2018 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2017 | 1.5 | 0.0 | 1 | 1 | 0 |
| 2016 | 4.9 | 4.9 | 8 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Cerro Fabricated Products LLC's reported OSHA injury record, strong versus its Hot forgings made from purchased nonferrous metals, unfinished peers, but not a guarantee about any single site today.
- At 64% of the Hot forgings made from purchased nonferrous metals, unfinished benchmark, Cerro Fabricated Products LLC reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Hot forgings made from purchased nonferrous metals, unfinished sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Cerro Fabricated Products LLC's safety grade?
How is the safety grade calculated?
How many injuries has Cerro Fabricated Products LLC reported?
Where does PlainSafetyScore get its data?
Explore More Safety Data
Read our methodology - how this data is sourced, computed, and verified.