Instruments, musical, manufacturing · Indiana
Conn-Selmer South Facility
ELKHART, IN · ~115 workers · 4 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 2.1
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Conn-Selmer South Facility runs at 65% of its industry's injury rate — safer than the typical Instruments, musical, manufacturing workplace — earning a grade B.
- B
- Good Safety Record
- 2.1
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 5
- recordable injuries tracked
Grade compares Conn-Selmer South Facility's OSHA Total Case Rate to the BLS industry benchmark across 4 years of Form 300A filings (2016–2024).
Injury rate over time
Conn-Selmer South Facility's yearly Total Case Rate, against the 3.3 industry benchmark.
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 339992.
Where Conn-Selmer South Facility falls in its industry
47 Instruments, musical, manufact establishmentsSafer than 68% of graded establishments in this industry, whose median TCR is 3.6.
Conn-Selmer South Facility has an average TCR of 2.1, which is 65% of the industry average (3.3) for Instruments, musical, manufacturing. This is better than average.
Safety Insights for Conn-Selmer South Facility
Conn-Selmer South Facility operates an establishment with approximately 115 full-time equivalent workers in ELKHART, IN, classified under the Instruments, musical, manufacturing industry (NAICS 339992). Across 4 years of mandatory OSHA Injury Tracking Application (ITA) reporting, this employer has accumulated 5 recordable injuries, 4 occupational illnesses, and 0 workplace fatalities. The average Total Case Rate (TCR) of 2.1 injuries per 100 full-time workers per year provides the anchor metric for the B letter grade (Good Safety Record).
Benchmarked against the Bureau of Labor Statistics industry average of 3.3 for Instruments, musical, manufacturing, Conn-Selmer South Facility's workforce experiences 65% of the typical injury burden. This ratio matters because TCR already normalizes for hours worked — a 200,000-hour exposure base equals roughly 100 full-time workers — so establishments with very different headcounts can be compared directly. A TCR below the benchmark signals that controls, training, or automation may be outperforming peers.
Multi-year trend analysis is the single most reliable signal here: a one-year spike could reflect a single severe event, whereas sustained elevation across 4 reporting cycles points to systemic hazard exposure. Readers evaluating Conn-Selmer South Facility as an employer, contractor, investment, or regulatory target should examine the yearly DART rate (days away, restricted, or transferred), the fatality count of 0, and any year-over-year deterioration shown in the table below. All figures come directly from employer-submitted OSHA Form 300A summaries — there is no modeling, estimation, or third-party adjustment layered on top of the government data.
Verify This Employer with OSHA
All injury, illness, and fatality figures on this page are sourced from Conn-Selmer South Facility's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source — name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor — OSHA Establishment-Specific Injury and Illness Data. NAICS 339992 — Instruments, musical, manufacturing.
DART Rate — Transparent Calculation (2019)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
1 DART incidents × 200,000 ÷ 177,296 hours worked = 1.13 DART
Methodology: 29 CFR 1904 — OSHA Form 300A recordkeeping
Cross-Validating Context — Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Conn-Selmer South Facility (this establishment) | 2.15 | OSHA ITA Form 300A, 4-year avg |
| Instruments, musical, manufacturing industry avg | 3.30 | BLS IIF, NAICS 339992 |
| Indiana state avg (all industries) | 4.53 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics — Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Conn-Selmer South Facility to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2019: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2018: 3 reportable incidents · 1 injuries, 2 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2017: 2 reportable incidents · 1 injuries, 1 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2016: 1 reportable incidents · 0 injuries, 1 illnesses, 0 fatalities — OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) — inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2019 | 3.4 | 1.1 | 3 | 0 | 0 |
| 2018 | 2.8 | 1.8 | 1 | 2 | 0 |
| 2017 | 1.6 | 1.6 | 1 | 1 | 0 |
| 2016 | 0.9 | 0.0 | 0 | 1 | 0 |
What this grade means for you
Use this grade as a relative read on Conn-Selmer South Facility's reported OSHA injury record — strong versus its Instruments, musical, manufacturing peers, but not a guarantee about any single site today.
- At 65% of the Instruments, musical, manufacturing benchmark, Conn-Selmer South Facility reports fewer injuries than typical peers — still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Instruments, musical, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Conn-Selmer South Facility's safety grade?
How is the safety grade calculated?
How many injuries has Conn-Selmer South Facility reported?
Where does PlainSafetyScore get its data?
Explore More Safety Data
Read our methodology — how this data is sourced, computed, and verified.