Architectural wall panels, precast concrete, manufacturing · Florida

Crown Building Products of FL LLC

Arcadia, FL · ~60 workers · 3 years of OSHA Injury Tracking Application data.

F
Failing Safety Record
15.5
Avg TCR
3.3
Industry avg
0
Fatalities

The verdict

Crown Building Products of FL LLC runs at 470% of its industry's injury rate - far more dangerous than the typical Architectural wall panels, precast concrete, manufacturing workplace, earning a grade F.

F
Failing Safety Record
15.5
avg TCR · per 100 workers
3.3
industry benchmark (BLS)
9
recordable injuries tracked

Grade compares Crown Building Products of FL LLC's OSHA Total Case Rate of 15.5 to the Architectural wall panels, precast concrete, manufacturing BLS benchmark of 3.3 (470% of benchmark) across 3 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.

Injury rate over time

Crown Building Products of FL LLC's yearly Total Case Rate, against the 3.3 industry benchmark.

010203040 202120222024 2.43.3 Industry benchmarkCrown Building Products of FL LLC TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 327390.

Where Crown Building Products of FL LLC falls in its industry

875 Architectural wall panels, pre establishments

Safer than 4% of graded establishments in this industry, whose median TCR is 4.1.

More dangerous than peersSafer than peers

Narrower to Florida alone (the establishments it most directly competes with for workers and contracts): ranked #72 safest of 73 Architectural wall panels, pre employers in Florida.

Trend analysis for Crown Building Products of FL LLC

Between 2021 and 2024, Crown Building Products of FL LLC's Total Case Rate improved from 36.5 to 2.4 recordable injuries per 100 full-time workers, a 94% decrease across 3 years of OSHA reporting.

The safest year on record was 2024, at a TCR of 2.4, while 2021 saw the highest rate, at 36.5, a spread of 34.2 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.

Summed across those 3 reporting years, Crown Building Products of FL LLC recorded 9 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 3-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

The 9 injuries, 12 illnesses shown on this page for Crown Building Products of FL LLC are sourced from its own 3 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 327390 - Architectural wall panels, precast concrete, manufacturing.

DART Rate, Transparent Calculation (2024)

What is the DART rate formula?

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

1 DART incidents × 200,000 ÷ 169,509 hours worked = 1.18 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
Crown Building Products of FL LLC (this establishment) 15.50 OSHA ITA Form 300A, 3-year avg
Concrete products, precast (except block, brick and pipe), manufacturing industry avg 3.30 BLS IIF, NAICS 327390
Florida state avg (all industries) 4.57 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Crown Building Products of FL LLC to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 2.4 1.2 2 0 0
2022 7.6 6.1 5 0 0
2021 36.5 36.5 2 12 0

What this grade means for you

Use this grade as a relative read on Crown Building Products of FL LLC's reported OSHA injury record versus its Architectural wall panels, precast concrete, manufacturing peers, not a verdict on whether any single site is safe today.

  • At 470% of the Architectural wall panels, precast concrete, manufacturing benchmark, Crown Building Products of FL LLC reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
  • Judge this record against the wider Architectural wall panels, precast concrete, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is Crown Building Products of FL LLC's safety grade?
Crown Building Products of FL LLC has a safety grade of F (Failing Safety Record). This grade is based on their average Total Case Rate (TCR) of 15.5 compared to the BLS industry benchmark of 3.3 for Architectural wall panels, precast concrete, manufacturing.
How many injuries has Crown Building Products of FL LLC reported?
Crown Building Products of FL LLC has reported 9 total injuries and 0 fatalities across 3 years of OSHA data (2024, 2022, 2021). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry, by workforce size within Florida, and by nearby establishments in Arcadia - a different peer set than the category browse links below.

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2022, 2021. This is publicly available government data - not a legal determination of workplace conditions.
Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.