Instruments, mechanical microsurgical, manufacturing · New Jersey
Datascope Corp - Wayne
Wayne, NJ · ~358 workers · 2 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 3.9
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Datascope Corp - Wayne runs at 118% of its industry's injury rate - about level with the typical Instruments, mechanical microsurgical, manufacturing workplace, earning a grade C.
- C
- Average Safety Record
- 3.9
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 20
- recordable injuries tracked
Grade compares Datascope Corp - Wayne's OSHA Total Case Rate of 3.9 to the Instruments, mechanical microsurgical, manufacturing BLS benchmark of 3.3 (118% of benchmark) across 2 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Datascope Corp - Wayne's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Datascope Corp - Wayne falls in its industry
872 Instruments, mechanical micros establishmentsSafer than 10% of graded establishments in this industry, whose median TCR is 1.2.
Narrower to New Jersey alone (the establishments it most directly competes with for workers and contracts): ranked #17 safest of 20 Instruments, mechanical micros employers in New Jersey.
Trend analysis for Datascope Corp - Wayne
Between 2023 and 2024, Datascope Corp - Wayne's Total Case Rate improved from 5.1 to 2.6 recordable injuries per 100 full-time workers, a 49% decrease across 1 year of OSHA reporting.
The safest year on record was 2024, at a TCR of 2.6, while 2023 saw the highest rate, at 5.1, a spread of 2.5 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 2 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 2 reporting years, Datascope Corp - Wayne recorded 20 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 20 injuries, 7 illnesses shown on this page for Datascope Corp - Wayne are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 339112 - Instruments, mechanical microsurgical, manufacturing.
DART Rate, Transparent Calculation (2024)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
4 DART incidents × 200,000 ÷ 682,639 hours worked = 1.17 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Datascope Corp - Wayne (this establishment) | 3.88 | OSHA ITA Form 300A, 2-year avg |
| Instruments, mechanical microsurgical, manufacturing industry avg | 3.30 | BLS IIF, NAICS 339112 |
| New Jersey state avg (all industries) | 4.90 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Datascope Corp - Wayne to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 9 reportable incidents · 4 injuries, 5 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 18 reportable incidents · 16 injuries, 2 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 2.6 | 1.2 | 4 | 5 | 0 |
| 2023 | 5.1 | 0.0 | 16 | 2 | 0 |
What this grade means for you
Use this grade as a relative read on Datascope Corp - Wayne's reported OSHA injury record versus its Instruments, mechanical microsurgical, manufacturing peers, not a verdict on whether any single site is safe today.
- At 118% of the Instruments, mechanical microsurgical, manufacturing benchmark, Datascope Corp - Wayne reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Instruments, mechanical microsurgical, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Datascope Corp - Wayne's safety grade?
How many injuries has Datascope Corp - Wayne reported?
Similar Employers
Matched by safety record across the industry, by workforce size within New Jersey, and by nearby establishments in Wayne - a different peer set than the category browse links below.
Similar TCR (~3.9)
Similar size (~358 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.