Electrical signs manufacturing · Ohio
Delaware OH Manufacturing
DELAWARE, OH · ~131 workers · 6 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 5.2
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Delaware OH Manufacturing runs at 156% of its industry's injury rate - more dangerous than the typical Electrical signs manufacturing workplace, earning a grade D.
- D
- Poor Safety Record
- 5.2
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 39
- recordable injuries tracked
Grade compares Delaware OH Manufacturing's OSHA Total Case Rate to the BLS industry benchmark across 6 years of Form 300A filings (2016–2024).
Injury rate over time
Delaware OH Manufacturing's yearly Total Case Rate, against the 3.3 industry benchmark.
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 339950.
Where Delaware OH Manufacturing falls in its industry
448 Electrical signs manufacturing establishmentsSafer than 31% of graded establishments in this industry, whose median TCR is 3.3.
Delaware OH Manufacturing has an average TCR of 5.2, which is 156% of the industry average (3.3) for Electrical signs manufacturing. This is worse than average.
Safety Insights for Delaware OH Manufacturing
Delaware OH Manufacturing operates an establishment with approximately 131 full-time equivalent workers in DELAWARE, OH, classified under the Electrical signs manufacturing industry (NAICS 339950). Across 6 years of mandatory OSHA Injury Tracking Application (ITA) reporting, this employer has accumulated 39 recordable injuries, 2 occupational illnesses, and 0 workplace fatalities. The average Total Case Rate (TCR) of 5.2 injuries per 100 full-time workers per year provides the anchor metric for the D letter grade (Poor Safety Record).
Benchmarked against the Bureau of Labor Statistics industry average of 3.3 for Electrical signs manufacturing, Delaware OH Manufacturing's workforce experiences 156% of the typical injury burden. This ratio matters because TCR already normalizes for hours worked, a 200,000-hour exposure base equals roughly 100 full-time workers, so establishments with very different headcounts can be compared directly. A TCR above the benchmark flags a higher-than-typical risk profile for jobseekers, insurers, and enforcement agencies to examine.
Multi-year trend analysis is the single most reliable signal here: a one-year spike could reflect a single severe event, whereas sustained elevation across 6 reporting cycles points to systemic hazard exposure. Readers evaluating Delaware OH Manufacturing as an employer, contractor, investment, or regulatory target should examine the yearly DART rate (days away, restricted, or transferred), the fatality count of 0, and any year-over-year deterioration shown in the table below. All figures come directly from employer-submitted OSHA Form 300A summaries, there is no modeling, estimation, or third-party adjustment layered on top of the government data.
Verify This Employer with OSHA
All injury, illness, and fatality figures on this page are sourced from Delaware OH Manufacturing's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 339950 - Electrical signs manufacturing.
DART Rate, Transparent Calculation (2022)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
5 DART incidents × 200,000 ÷ 272,427 hours worked = 3.67 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Delaware OH Manufacturing (this establishment) | 5.16 | OSHA ITA Form 300A, 6-year avg |
| Electrical signs manufacturing industry avg | 3.30 | BLS IIF, NAICS 339950 |
| Ohio state avg (all industries) | 3.90 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Delaware OH Manufacturing to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2022: 8 reportable incidents · 7 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 7 reportable incidents · 7 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 13 reportable incidents · 12 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2018: 9 reportable incidents · 9 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2022 | 5.9 | 3.7 | 7 | 1 | 0 |
| 2020 | 5.4 | 3.9 | 7 | 0 | 0 |
| 2019 | 8.8 | 4.1 | 12 | 1 | 0 |
| 2018 | 7.4 | 5.7 | 9 | 0 | 0 |
| 2017 | 0.6 | 0.0 | 1 | 0 | 0 |
| 2016 | 2.8 | 1.9 | 3 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Delaware OH Manufacturing's reported OSHA injury record versus its Electrical signs manufacturing peers, not a verdict on whether any single site is safe today.
- At 156% of the Electrical signs manufacturing benchmark, Delaware OH Manufacturing reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Electrical signs manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Delaware OH Manufacturing's safety grade?
How is the safety grade calculated?
How many injuries has Delaware OH Manufacturing reported?
Where does PlainSafetyScore get its data?
Explore More Safety Data
Read our methodology - how this data is sourced, computed, and verified.