Bone plates and screws manufacturing · Pennsylvania

DSM Biomedical - Pennsylvania Drive Site

Exton, PA · ~336 workers · 4 years of OSHA Injury Tracking Application data.

A
Excellent Safety Record
0.9
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

DSM Biomedical - Pennsylvania Drive Site runs at 27% of its industry's injury rate - far safer than the typical Bone plates and screws manufacturing workplace, earning a grade A.

DSM Biomedical - Pennsylvania Drive Site: 0.9 TCR = 27% of Bone plates and screws manufacturing BLS 3.3 · 4y Form 300A (see methodology below)

DSM Biomedical - Pennsylvania Drive Site safety composite

DSM Biomedical - Pennsylvania Drive Site scores strongest on total case rate (tcr) (safer than 70% of same-industry peers) and weakest on dart rate (safer than 46%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

C

57/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
C 0.89 per 100 workers

Safer than 70% of industry peers

DART rate
D 0.61 per 100 workers

Safer than 46% of industry peers

Fatalities
D 0

Safer than 50% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

DSM Biomedical - Pennsylvania Drive Site held a steady TCR band

DSM Biomedical - Pennsylvania Drive Site's TCR held near 0.3 from 0.6 in 2017 to 0.9 in 2020. Peak filing year was 2019 at 1.1 TCR. In 2020, DART was 0.69× this establishment's average TCR (severity share of cases).

2017=0.6 · 2018=1.0 · 2019=1.1 · 2020=0.9

OSHA ITA Form 300A scorecard

Establishment book 339112 · Exton, PA AT/BELOW-IND · MID

Grade A · TCR 0.9 · 27% of ind

  • DART 0.6 DART
  • RANK #14/42
  • PHOTO Kirwan Surgical Prod…
  • BOOK 4y book
  • INJ 9 inj
  • SIZE ~336 FTE

Nearest TCR peer: Kirwan Surgical Products, LLC (0.0 TCR gap)

Read with this employer → · Industry book → · Pennsylvania employers → · Look up another →

DSM Biomedical - Pennsylvania Drive Site in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows DSM Biomedical - Pennsylvania Drive Site averages 0.9 TCR (27% of the Bone plates and screws manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

DSM Biomedical - Pennsylvania Drive Site TCR series: 2017=0.6 · 2018=1 · 2019=1.1 · 2020=0.9 · BLS 3.3

Where DSM Biomedical - Pennsylvania Drive Site falls in its industry

741 Bone plates and screws manufac establishments

Safer than 70% of graded establishments in this industry, whose median TCR is 1.5.

More dangerous than peersSafer than peers

Narrower to Pennsylvania alone (the establishments it most directly competes with for workers and contracts): ranked #14 safest of 42 Bone plates and screws manufac employers in Pennsylvania.

DSM Biomedical - Pennsylvania Drive Site (336 employees, TCR 0.9) among 29 same-industry peers, split at the industry median of 174 employees and a TCR of 1.5 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 02,0004,0006,0008,000 0246 Average employees Total Case Rate DSM Biomedical - Pennsylvania Drive Site
DSM Biomedical - Pennsylvania Drive Site (336 employees, TCR 0.9) among 29 same-industry peers, split at the industry median of 174 employees and a TCR of 1.5

DSM Biomedical - Pennsylvania Drive Site has more employees than the Bone plates and screws manufacturing median and a lower injury rate than the industry's median TCR of 1.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2020 0.9 0.6 2 1 0
2019 1.1 0.6 2 2 0
2018 1.0 1.0 3 0 0
2017 0.6 0.6 2 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

339112 · PA · Exton

741 Bone plates and screws manufacturing employers nationwide with a credible TCR · 22,692 rated employers in Pennsylvania with headcount on file · 138 employers in Exton, PA · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Kirwan Surgical Products, LLC 0.9 TCR
NAICS-TCR Tecomet 0.9 TCR
NAICS-TCR Omron Healthcare, Inc. (OHI) 0.9 TCR
NAICS-TCR 2284-312 0.9 TCR
STATE-SIZE HRI, Inc. 336 FTE
STATE-SIZE SKF USA Inc. - Lansdale Remote 336 FTE
STATE-SIZE Havis PA 336 FTE
STATE-SIZE US Foods Greensburg 336 FTE
CITY-NEAR Bentley Systems, Incorporated 1,292 FTE
CITY-NEAR West Pharmaceutical Services, Inc., Exton 531 FTE
CITY-NEAR Brian's House Inc 416 FTE
CITY-NEAR Shire: Exton 385 FTE
NAT-TCR DFW Airport 0.9 TCR
NAT-TCR Michigan Cat Kalamazoo 0.9 TCR
NAT-TCR Modesto Exchange Whse 0.9 TCR
NAT-TCR Tippen 0.9 TCR
NAT-SIZE Guhring, Inc. - Wisconsin 336 FTE
NAT-SIZE CA San Bernardino 336 FTE
NAT-SIZE 0270 - Doors-Grinnell 336 FTE
NAT-SIZE Channel Islands Berry Farms, Inc. 336 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2020, 2019, 2018, 2017. This is publicly available government data - not a legal determination of workplace conditions.
Data sourced from official public datasets. See our methodology for details.