Cold rolling steel shapes (e.g., bar, plate, rod, sheet, strip) made from purchased steel · Massachusetts
Engineered Materials Solutions
Attleboro, MA · ~272 workers · 8 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 4.9
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Engineered Materials Solutions runs at 147% of its industry's injury rate - more dangerous than the typical Cold rolling steel shapes (e.g., bar, plate, rod, sheet, strip) made from purchased steel workplace, earning a grade D.
Engineered Materials Solutions: 4.9 TCR = 147% of Cold rolling steel shapes (e.g., bar, plate, rod, sheet, strip) made from purchased steel BLS 3.3 · 8y Form 300A (see methodology below)
Engineered Materials Solutions safety composite
Engineered Materials Solutions scores strongest on fatalities (safer than 51% of same-industry peers) and weakest on dart rate (safer than 35%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
40/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- D 4.86 per 100 workers
Safer than 38% of industry peers
- DART rate
- D 2.47 per 100 workers
Safer than 35% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Engineered Materials Solutions held a steady TCR band
Engineered Materials Solutions's TCR held near 0.3 from 3.3 in 2016 to 3.1 in 2023. Peak filing year was 2020 at 8.4 TCR. In 2023, DART was 0.51× this establishment's average TCR (severity share of cases).
2016=3.3 · 2017=7.3 · 2018=3.5 · 2019=5.5 · 2020=8.4 · 2021=4.3 · 2022=3.5 · 2023=3.1
OSHA ITA Form 300A scorecard
Establishment book 331221 · Attleboro, MA ABOVE-IND · MID
Grade D · TCR 4.9 · 147% of ind
- DART 2.5 DART
- RANK #2/4
- PHOTO Johnstown Facility
- BOOK 8y book
- INJ 88 inj
- SIZE ~272 FTE
Nearest TCR peer: Johnstown Facility (0.0 TCR gap)
Read with this employer → · Industry book → · Massachusetts employers → · Look up another →
Engineered Materials Solutions in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Engineered Materials Solutions
4.9 TCR
- Johnstown Faci
Johnstown Facility
4.8 TCR
- Corey Steel Co
Corey Steel Company
4.8 TCR
- Niagara Falls
Niagara Falls Facility
4.8 TCR
- Jemison Metals
Jemison Metals DCT
4.8 TCR
What this shows Engineered Materials Solutions averages 4.9 TCR (147% of the Cold rolling steel shapes (e.g., bar, plate, rod, sheet, strip) made from purchased steel BLS benchmark).
Engineered Materials Solutions TCR series: 2016=3.3 · 2017=7.3 · 2018=3.5 · 2019=5.5 · 2020=8.4 · 2021=4.3 · 2022=3.5 · 2023=3.1 · BLS 3.3
Where Engineered Materials Solutions falls in its industry
206 Cold rolling steel shapes (e.g establishmentsSafer than 38% of graded establishments in this industry, whose median TCR is 3.9.
Narrower to Massachusetts alone (the establishments it most directly competes with for workers and contracts): ranked #2 safest of 4 Cold rolling steel shapes (e.g employers in Massachusetts.
Engineered Materials Solutions has more employees than the Cold rolling steel shapes (e.g., bar, pl median and a higher injury rate than the industry's median TCR of 3.9. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2023 | 3.1 | 2.5 | 5 | 0 | 0 |
| 2022 | 3.5 | 3.0 | 7 | 0 | 0 |
| 2021 | 4.3 | 3.4 | 10 | 0 | 0 |
| 2020 | 8.4 | 7.4 | 17 | 0 | 0 |
| 2019 | 5.5 | 3.8 | 12 | 1 | 0 |
| 2018 | 3.5 | 1.7 | 9 | 1 | 0 |
| 2017 | 7.3 | 5.8 | 20 | 0 | 0 |
| 2016 | 3.3 | 2.1 | 8 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
331221 · MA · Attleboro
206 Cold rolling steel shapes (e.g., bar, plate, rod, sheet, strip) made from purchased steel employers nationwide with a credible TCR · 10,108 rated employers in Massachusetts with headcount on file · 71 employers in Attleboro, MA · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Johnstown Facility | 4.8 TCR |
| NAICS-TCR | Corey Steel Company | 4.8 TCR |
| NAICS-TCR | Niagara Falls Facility | 4.8 TCR |
| NAICS-TCR | Jemison Metals DCT | 4.8 TCR |
| STATE-SIZE | WEST ROXBURY RIVERMOOR (MA50) | 272 FTE |
| STATE-SIZE | Turners Falls | 272 FTE |
| STATE-SIZE | Wyman-Gordon | 272 FTE |
| STATE-SIZE | 72011 | 272 FTE |
| CITY-NEAR | Sturdy Health Hospital | 2,092 FTE |
| CITY-NEAR | Sturdy Memorial Hospital | 1,750 FTE |
| CITY-NEAR | Sensata Technologies, Inc. Attleboro, MA | 839 FTE |
| CITY-NEAR | Lacerta Group, LLC - 505 Collins St. | 689 FTE |
| NAT-TCR | Graphics Universal Inc | 4.9 TCR |
| NAT-TCR | Saint-Gobain Abrasives | 4.9 TCR |
| NAT-TCR | Sugar Foods Corporation | 4.9 TCR |
| NAT-TCR | Jacobs Heating and Air Conditioning, Inc. | 4.9 TCR |
| NAT-SIZE | Old Trapper Smoked Products, Inc | 272 FTE |
| NAT-SIZE | Hometown Food Company | 272 FTE |
| NAT-SIZE | Conair LLC - Central Building Glendale | 272 FTE |
| NAT-SIZE | Monogram Prepared Meats LLC | 272 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.