Fabri-Tech, Inc.
Open-data reference.
BROOKFIELD, WI | Sheet metal work (except stampings) manufacturing
~53 avg employees | 9 years of OSHA data
Fabri-Tech, Inc. has an average TCR of 7.6, which is 232% of the industry average (3.3) for Sheet metal work (except stampings) manufacturing. This is significantly worse than average.
Safety Insights for Fabri-Tech, Inc.
Fabri-Tech, Inc. operates an establishment with approximately 53 full-time equivalent workers in BROOKFIELD, WI, classified under the Sheet metal work (except stampings) manufacturing industry (NAICS 332322). Across 9 years of mandatory OSHA Injury Tracking Application (ITA) reporting, this employer has accumulated 29 recordable injuries, 12 occupational illnesses, and 0 workplace fatalities. The average Total Case Rate (TCR) of 7.6 injuries per 100 full-time workers per year provides the anchor metric for the F letter grade (Failing Safety Record).
Benchmarked against the Bureau of Labor Statistics industry average of 3.3 for Sheet metal work (except stampings) manufacturing, Fabri-Tech, Inc.'s workforce experiences 232% of the typical injury burden. This ratio matters because TCR already normalizes for hours worked — a 200,000-hour exposure base equals roughly 100 full-time workers — so establishments with very different headcounts can be compared directly. A TCR above the benchmark flags a higher-than-typical risk profile for jobseekers, insurers, and enforcement agencies to examine.
Multi-year trend analysis is the single most reliable signal here: a one-year spike could reflect a single severe event, whereas sustained elevation across 9 reporting cycles points to systemic hazard exposure. Readers evaluating Fabri-Tech, Inc. as an employer, contractor, investment, or regulatory target should examine the yearly DART rate (days away, restricted, or transferred), the fatality count of 0, and any year-over-year deterioration shown in the table below. All figures come directly from employer-submitted OSHA Form 300A summaries — there is no modeling, estimation, or third-party adjustment layered on top of the government data.
Verify This Employer with OSHA
All injury, illness, and fatality figures on this page are sourced from Fabri-Tech, Inc.'s own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source — name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor — OSHA Establishment-Specific Injury and Illness Data. NAICS 332322 — Sheet metal work (except stampings) manufacturing.
DART Rate — Transparent Calculation (2024)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
2 DART incidents × 200,000 ÷ 104,431 hours worked = 3.83 DART
Methodology: 29 CFR 1904 — OSHA Form 300A recordkeeping
Cross-Validating Context — Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Fabri-Tech, Inc. (this establishment) | 7.64 | OSHA ITA Form 300A, 9-year avg |
| Joists, sheet metal (except stampings), manufacturing industry avg | 3.30 | BLS IIF, NAICS 332322 |
| Wisconsin state avg (all industries) | 9.28 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics — Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Fabri-Tech, Inc. to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 4 reportable incidents · 4 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2023: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2022: 6 reportable incidents · 3 injuries, 3 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2021: 3 reportable incidents · 1 injuries, 2 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2020: 11 reportable incidents · 5 injuries, 6 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2019: 6 reportable incidents · 6 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2018: 4 reportable incidents · 3 injuries, 1 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2017: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2016: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) — inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 7.7 | 3.8 | 4 | 0 | 0 |
| 2023 | 5.9 | 3.9 | 3 | 0 | 0 |
| 2022 | 11.3 | 3.8 | 3 | 3 | 0 |
| 2021 | 5.2 | 1.7 | 1 | 2 | 0 |
| 2020 | 17.4 | 14.2 | 5 | 6 | 0 |
| 2019 | 8.7 | 7.2 | 6 | 0 | 0 |
| 2018 | 6.0 | 4.5 | 3 | 1 | 0 |
| 2017 | 5.1 | 5.1 | 3 | 0 | 0 |
| 2016 | 1.6 | 1.6 | 1 | 0 | 0 |
Frequently Asked Questions
What is Fabri-Tech, Inc.'s safety grade?
How is the safety grade calculated?
How many injuries has Fabri-Tech, Inc. reported?
Where does PlainSafetyScore get its data?
Explore More Safety Data
Read our methodology — how this data is sourced, computed, and verified.