Addition, alteration and renovation general contractors, commercial and institutional building · New Mexico
Gencon General Contractors, LLC
Las Cruces, NM · ~25 workers · 5 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 9.0
- Avg TCR
- 2.9
- Industry avg
- 1
- Fatality
The verdict
Gencon General Contractors, LLC runs at 310% of its industry's injury rate - far more dangerous than the typical Addition, alteration and renovation general contractors, commercial and institutional building workplace, earning a grade F.
- F
- Failing Safety Record
- 9.0
- avg TCR · per 100 workers
- 2.9
- industry benchmark (BLS)
- 1
- worker fatalities on record
Grade compares Gencon General Contractors, LLC's OSHA Total Case Rate of 9.0 to the Addition, alteration and renovation general contractors, commercial and institutional building BLS benchmark of 2.9 (310% of benchmark) across 5 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Gencon General Contractors, LLC's yearly Total Case Rate, against the 2.9 industry benchmark.
Where Gencon General Contractors, LLC falls in its industry
6,114 Addition, alteration and renov establishmentsSafer than 6% of graded establishments in this industry, whose median TCR is 1.5.
Narrower to New Mexico alone (the establishments it most directly competes with for workers and contracts): ranked #39 safest of 40 Addition, alteration and renov employers in New Mexico.
Trend analysis for Gencon General Contractors, LLC
Between 2017 and 2021, Gencon General Contractors, LLC's Total Case Rate improved from 15.0 to 8.7 recordable injuries per 100 full-time workers, a 42% decrease across 4 years of OSHA reporting.
The safest year on record was 2020, at a TCR of 0.0, while 2019 saw the highest rate, at 17.4, a spread of 17.4 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 5 reporting years, Gencon General Contractors, LLC recorded 7 total injuries and illnesses and 1 fatality. Readers comparing establishments should weigh the 5-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 7 injuries, 2 illnesses, and 1 fatality shown on this page for Gencon General Contractors, LLC are sourced from its own 5 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 236220 - Addition, alteration and renovation general contractors, commercial and institutional building.
DART Rate, Transparent Calculation (2021)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
0 DART incidents × 200,000 ÷ 23,012 hours worked = 0.00 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Gencon General Contractors, LLC (this establishment) | 8.98 | OSHA ITA Form 300A, 5-year avg |
| Addition, alteration and renovation general contractors, commercial and institutional building industry avg | 2.90 | BLS IIF, NAICS 236220 |
| New Mexico state avg (all industries) | 5.12 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Gencon General Contractors, LLC to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2021: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 7 reportable incidents · 4 injuries, 2 illnesses, 1 fatality - OSHA inspection records (case numbers)
- 2018: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2021 | 8.7 | 0.0 | 1 | 0 | 0 |
| 2020 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2019 | 17.4 | 0.0 | 4 | 2 | 1 |
| 2018 | 3.8 | 0.0 | 1 | 0 | 0 |
| 2017 | 15.0 | 0.0 | 1 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Gencon General Contractors, LLC's reported OSHA injury record versus its Addition, alteration and renovation general contractors, commercial and institutional building peers, not a verdict on whether any single site is safe today.
- At 310% of the Addition, alteration and renovation general contractors, commercial and institutional building benchmark, Gencon General Contractors, LLC reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Addition, alteration and renovation general contractors, commercial and institutional building sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Gencon General Contractors, LLC's safety grade?
How many injuries has Gencon General Contractors, LLC reported?
Similar Employers
Matched by safety record across the industry, by workforce size within New Mexico, and by nearby establishments in Las Cruces - a different peer set than the category browse links below.
Similar TCR (~9.0)
Similar size (~25 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.