Access flooring installation · California
Genesis Floor Covering Inc
Santa Fe Springs, CA · ~48 workers · 2 years of OSHA Injury Tracking Application data.
- A
- Excellent Safety Record
- 1.0
- Avg TCR
- 2.8
- Industry avg
- 0
- Fatalities
The verdict
Genesis Floor Covering Inc runs at 36% of its industry's injury rate - far safer than the typical Access flooring installation workplace, earning a grade A.
- A
- Excellent Safety Record
- 1.0
- avg TCR · per 100 workers
- 2.8
- industry benchmark (BLS)
- 1
- recordable injuries tracked
Grade compares Genesis Floor Covering Inc's OSHA Total Case Rate of 1.0 to the Access flooring installation BLS benchmark of 2.8 (36% of benchmark) across 2 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Genesis Floor Covering Inc's yearly Total Case Rate, against the 2.8 industry benchmark.
Where Genesis Floor Covering Inc falls in its industry
315 Access flooring installation establishmentsSafer than 67% of graded establishments in this industry, whose median TCR is 1.9.
Narrower to California alone (the establishments it most directly competes with for workers and contracts): ranked #10 safest of 58 Access flooring installation employers in California.
Trend analysis for Genesis Floor Covering Inc
Between 2019 and 2020, Genesis Floor Covering Inc's Total Case Rate improved from 2.0 to 0.0 recordable injuries per 100 full-time workers, a 100% decrease across 1 year of OSHA reporting.
The safest year on record was 2020, at a TCR of 0.0, while 2019 saw the highest rate, at 2.0, a spread of 2.0 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 2 reporting years, Genesis Floor Covering Inc recorded 1 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 1 injuries shown on this page for Genesis Floor Covering Inc are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 238330 - Access flooring installation.
DART Rate, Transparent Calculation (2020)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
0 DART incidents × 200,000 ÷ 115,476 hours worked = 0.00 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Genesis Floor Covering Inc (this establishment) | 1.01 | OSHA ITA Form 300A, 2-year avg |
| Floor laying, scraping, finishing and refinishing industry avg | 2.80 | BLS IIF, NAICS 238330 |
| California state avg (all industries) | 5.64 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Genesis Floor Covering Inc to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2020: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2020 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2019 | 2.0 | 2.0 | 1 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Genesis Floor Covering Inc's reported OSHA injury record, strong versus its Access flooring installation peers, but not a guarantee about any single site today.
- At 36% of the Access flooring installation benchmark, Genesis Floor Covering Inc reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Access flooring installation sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Genesis Floor Covering Inc's safety grade?
How many injuries has Genesis Floor Covering Inc reported?
Similar Employers
Matched by safety record across the industry, by workforce size within California, and by nearby establishments in Santa Fe Springs - a different peer set than the category browse links below.
Similar TCR (~1.0)
Similar size (~48 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.