Foundries, die-casting, nonferrous metals · North Carolina
GF Linamar, LLC
Mills River, NC · ~203 workers · 6 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 4.8
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
GF Linamar, LLC runs at 144% of its industry's injury rate - more dangerous than the typical Foundries, die-casting, nonferrous metals workplace, earning a grade D.
- D
- Poor Safety Record
- 4.8
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 72
- recordable injuries tracked
Grade compares GF Linamar, LLC's OSHA Total Case Rate to the BLS industry benchmark across 6 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.
Injury rate over time
GF Linamar, LLC's yearly Total Case Rate, against the 3.3 industry benchmark.
Where GF Linamar, LLC falls in its industry
223 Foundries, die-casting, nonfer establishmentsSafer than 48% of graded establishments in this industry, whose median TCR is 4.7.
Narrower to North Carolina alone (the establishments it most directly competes with for workers and contracts): ranked #4 safest of 7 Foundries, die-casting, nonfer employers in North Carolina.
GF Linamar, LLC has an average TCR of 4.8, which is 144% of the industry average (3.3) for Foundries, die-casting, nonferrous metals. This is worse than average.
The letter grade is a transparent derived index PlainSafetyScore computes from public OSHA ITA and BLS benchmark data, not an official OSHA rating or safety certification. Full formula and thresholds: Methodology.
Trend analysis for GF Linamar, LLC
Between 2016 and 2021, GF Linamar, LLC's Total Case Rate held roughly steady from 0.0 to 6.4 recordable injuries per 100 full-time workers, a 0% change across 5 years of OSHA reporting.
The safest year on record was 2016, at a TCR of 0.0, while 2018 saw the highest rate, at 10.0, a spread of 10.0 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 6 reporting years, GF Linamar, LLC recorded 72 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 6-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
All injury, illness, and fatality figures on this page are sourced from GF Linamar, LLC's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 331523 - Foundries, die-casting, nonferrous metals.
DART Rate, Transparent Calculation (2021)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
22 DART incidents × 200,000 ÷ 1,026,411 hours worked = 4.29 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| GF Linamar, LLC (this establishment) | 4.75 | OSHA ITA Form 300A, 6-year avg |
| Aluminum die-castings, unfinished, manufacturing industry avg | 3.30 | BLS IIF, NAICS 331523 |
| North Carolina state avg (all industries) | 3.89 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by GF Linamar, LLC to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2021: 33 reportable incidents · 31 injuries, 2 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 18 reportable incidents · 18 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 13 reportable incidents · 13 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2018: 10 reportable incidents · 10 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2021 | 6.4 | 4.3 | 31 | 2 | 0 |
| 2020 | 5.6 | 4.1 | 18 | 0 | 0 |
| 2019 | 6.4 | 4.9 | 13 | 0 | 0 |
| 2018 | 10.0 | 6.0 | 10 | 0 | 0 |
| 2017 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2016 | 0.0 | 0.0 | 0 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on GF Linamar, LLC's reported OSHA injury record versus its Foundries, die-casting, nonferrous metals peers, not a verdict on whether any single site is safe today.
- At 144% of the Foundries, die-casting, nonferrous metals benchmark, GF Linamar, LLC reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Foundries, die-casting, nonferrous metals sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is GF Linamar, LLC's safety grade?
How many injuries has GF Linamar, LLC reported?
Similar Employers
Matched by safety record across the industry and by workforce size within North Carolina - a different peer set than the category browse links below.
Similar TCR (~4.8)
Explore More Safety Data
Read our methodology - how this data is sourced, computed, and verified.
Related
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.