Testing and prototype on aircraft parts, including de-icing, water tanks systems, anti-icing, heated floor panels for inside aircraft. · Ohio

Goodrich - Sensors and Integrated Systems - Uniontown, OH

Uniontown (Green), OH · ~104 workers · 2 years of OSHA Injury Tracking Application data.

C
Average Safety Record
0.0
Avg TCR
0.5
Industry avg
0
Fatalities

The verdict

Goodrich - Sensors and Integrated Systems - Uniontown, OH runs at 0% of its industry's injury rate - about level with the typical Testing and prototype on aircraft parts, including de-icing, water tanks systems, anti-icing, heated floor panels for inside aircraft. workplace, earning a grade C.

C
Average Safety Record
0.0
avg TCR · per 100 workers
0.5
industry benchmark (BLS)
0
recordable injuries tracked

Grade compares Goodrich - Sensors and Integrated Systems - Uniontown, OH's OSHA Total Case Rate of 0.0 to the Testing and prototype on aircraft parts, including de-icing, water tanks systems, anti-icing, heated floor panels for inside aircraft. BLS benchmark of 0.5 (0% of benchmark) across 2 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.

Injury rate over time

Goodrich - Sensors and Integrated Systems - Uniontown, OH's yearly Total Case Rate, against the 0.5 industry benchmark.

-0.200.20.40.6 20162017 00.5 Industry benchmarkGoodrich - Sensors and Integrated Systems - Uniontown, OH TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 541715.

Where Goodrich - Sensors and Integrated Systems - Uniontown, OH falls in its industry

79 Testing and prototype on aircr establishments

Safer than 59% of graded establishments in this industry, whose median TCR is 0.1.

More dangerous than peersSafer than peers

Narrower to Ohio alone (the establishments it most directly competes with for workers and contracts): ranked #7 safest of 9 Testing and prototype on aircr employers in Ohio.

Trend analysis for Goodrich - Sensors and Integrated Systems - Uniontown, OH

Between 2016 and 2017, Goodrich - Sensors and Integrated Systems - Uniontown, OH's Total Case Rate held roughly steady from 0.0 to 0.0 recordable injuries per 100 full-time workers, a 0% change across 1 year of OSHA reporting.

The safest year on record was 2016, at a TCR of 0.0, while 2016 saw the highest rate, at 0.0, a spread of 0.0 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 2 years with a usable rate on file, rather than one outlier year skewing the multi-year average.

Summed across those 2 reporting years, Goodrich - Sensors and Integrated Systems - Uniontown, OH recorded 0 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

The 0 injuries shown on this page for Goodrich - Sensors and Integrated Systems - Uniontown, OH are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 541715 - Testing and prototype on aircraft parts, including de-icing, water tanks systems, anti-icing, heated floor panels for inside aircraft..

DART Rate, Transparent Calculation (2017)

What is the DART rate formula?

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

0 DART incidents × 200,000 ÷ 210,567 hours worked = 0.00 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
Goodrich - Sensors and Integrated Systems - Uniontown, OH (this establishment) 0.00 OSHA ITA Form 300A, 2-year avg
Manufacturer of coatings/adhesives/motion control industry avg 0.50 BLS IIF, NAICS 541715
Ohio state avg (all industries) 3.90 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Goodrich - Sensors and Integrated Systems - Uniontown, OH to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2017 0.0 0.0 0 0 0
2016 0.0 0.0 0 0 0

What this grade means for you

Use this grade as a relative read on Goodrich - Sensors and Integrated Systems - Uniontown, OH's reported OSHA injury record, strong versus its Testing and prototype on aircraft parts, including de-icing, water tanks systems, anti-icing, heated floor panels for inside aircraft. peers, but not a guarantee about any single site today.

  • At 0% of the Testing and prototype on aircraft parts, including de-icing, water tanks systems, anti-icing, heated floor panels for inside aircraft. benchmark, Goodrich - Sensors and Integrated Systems - Uniontown, OH reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
  • Judge this record against the wider Testing and prototype on aircraft parts, including de-icing, water tanks systems, anti-icing, heated floor panels for inside aircraft. sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is Goodrich - Sensors and Integrated Systems - Uniontown, OH's safety grade?
Goodrich - Sensors and Integrated Systems - Uniontown, OH has a safety grade of C (Average Safety Record). This grade is based on their average Total Case Rate (TCR) of 0.0 compared to the BLS industry benchmark of 0.5 for Testing and prototype on aircraft parts, including de-icing, water tanks systems, anti-icing, heated floor panels for inside aircraft..
How many injuries has Goodrich - Sensors and Integrated Systems - Uniontown, OH reported?
Goodrich - Sensors and Integrated Systems - Uniontown, OH has reported 0 total injuries and 0 fatalities across 2 years of OSHA data (2017, 2016). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry, by workforce size within Ohio, and by nearby establishments in Uniontown (Green) - a different peer set than the category browse links below.

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2017, 2016. This is publicly available government data - not a legal determination of workplace conditions.
Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.