Boiler chipping, cleaning and scaling · Arizona
High Desert Mechanical, Inc.
Gilbert, AZ · ~18 workers · 2 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 21.3
- Avg TCR
- 2.8
- Industry avg
- 0
- Fatalities
The verdict
High Desert Mechanical, Inc. runs at 761% of its industry's injury rate - far more dangerous than the typical Boiler chipping, cleaning and scaling workplace, earning a grade F.
- F
- Failing Safety Record
- 21.3
- avg TCR · per 100 workers
- 2.8
- industry benchmark (BLS)
- 1
- recordable injuries tracked
Grade compares High Desert Mechanical, Inc.'s OSHA Total Case Rate of 21.3 to the Boiler chipping, cleaning and scaling BLS benchmark of 2.8 (761% of benchmark) across 2 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
High Desert Mechanical, Inc.'s yearly Total Case Rate, against the 2.8 industry benchmark.
Where High Desert Mechanical, Inc. falls in its industry
6,536 Boiler chipping, cleaning and establishmentsSafer than 1% of graded establishments in this industry, whose median TCR is 2.8.
Narrower to Arizona alone (the establishments it most directly competes with for workers and contracts): ranked #142 safest of 144 Boiler chipping, cleaning and employers in Arizona.
Trend analysis for High Desert Mechanical, Inc.
Between 2022 and 2023, High Desert Mechanical, Inc.'s Total Case Rate improved from 42.6 to 0.0 recordable injuries per 100 full-time workers, a 100% decrease across 1 year of OSHA reporting.
The safest year on record was 2023, at a TCR of 0.0, while 2022 saw the highest rate, at 42.6, a spread of 42.6 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 2 reporting years, High Desert Mechanical, Inc. recorded 1 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 1 injuries shown on this page for High Desert Mechanical, Inc. are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 238220 - Boiler chipping, cleaning and scaling.
DART Rate, Transparent Calculation (2023)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
0 DART incidents × 200,000 ÷ 23,552 hours worked = 0.00 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| High Desert Mechanical, Inc. (this establishment) | 21.30 | OSHA ITA Form 300A, 2-year avg |
| Mechanical contractors industry avg | 2.80 | BLS IIF, NAICS 238220 |
| Arizona state avg (all industries) | 4.73 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by High Desert Mechanical, Inc. to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2023: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2022: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2023 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2022 | 42.6 | 0.0 | 1 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on High Desert Mechanical, Inc.'s reported OSHA injury record versus its Boiler chipping, cleaning and scaling peers, not a verdict on whether any single site is safe today.
- At 761% of the Boiler chipping, cleaning and scaling benchmark, High Desert Mechanical, Inc. reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Boiler chipping, cleaning and scaling sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is High Desert Mechanical, Inc.'s safety grade?
How many injuries has High Desert Mechanical, Inc. reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Arizona, and by nearby establishments in Gilbert - a different peer set than the category browse links below.
Similar TCR (~21.3)
Similar size (~18 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.