Cutting dies, metalworking, manufacturing · Michigan

Huron Tool & Engineering

Bad Axe, MI · ~55 workers · 4 years of OSHA Injury Tracking Application data.

C
Average Safety Record
3.3
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

Huron Tool & Engineering runs at 101% of its industry's injury rate - about level with the typical Cutting dies, metalworking, manufacturing workplace, earning a grade C.

Huron Tool & Engineering: 3.3 TCR = 101% of Cutting dies, metalworking, manufacturing BLS 3.3 · 4y Form 300A (see methodology below)

Huron Tool & Engineering safety composite

Huron Tool & Engineering scores strongest on total case rate (tcr) (safer than 51% of same-industry peers) and weakest on dart rate (safer than 30%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

D

44/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
D 3.33 per 100 workers

Safer than 51% of industry peers

DART rate
F 1.97 per 100 workers

Safer than 30% of industry peers

Fatalities
D 0

Safer than 51% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

TCR Δ

−2.2

2016→2024

Huron Tool & Engineering injury rate improved

Huron Tool & Engineering's TCR fell 2.2 from 4.2 in 2016 to 2.0 in 2024. Peak filing year was 2017 at 5.3 TCR. In 2024, DART was 0.59× this establishment's average TCR (severity share of cases).

2016=4.2 · 2017=5.3 · 2023=1.9 · 2024=2.0

OSHA ITA Form 300A scorecard

Establishment book 333514 · Bad Axe, MI ABOVE-IND · SMALL

Grade C · TCR 3.3 · 101% of ind

  • DART 2.0 DART
  • RANK #59/131
  • PHOTO Omni Die & Engineeri…
  • BOOK 4y book
  • INJ 9 inj
  • SIZE ~55 FTE

Nearest TCR peer: Omni Die & Engineering Inc. (0.0 TCR gap)

Read with this employer → · Industry book → · Michigan employers → · Look up another →

Huron Tool & Engineering in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows Huron Tool & Engineering averages 3.3 TCR (101% of the Cutting dies, metalworking, manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

Huron Tool & Engineering TCR series: 2016=4.2 · 2017=5.3 · 2023=1.9 · 2024=2 · BLS 3.3

Where Huron Tool & Engineering falls in its industry

387 Cutting dies, metalworking, ma establishments

Safer than 51% of graded establishments in this industry, whose median TCR is 3.4.

More dangerous than peersSafer than peers

Narrower to Michigan alone (the establishments it most directly competes with for workers and contracts): ranked #59 safest of 131 Cutting dies, metalworking, ma employers in Michigan.

Huron Tool & Engineering (55 employees, TCR 3.3) among 29 same-industry peers, split at the industry median of 56 employees and a TCR of 3.4 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 0100200300400500 051015 Average employees Total Case Rate Huron Tool & Engineering
Huron Tool & Engineering (55 employees, TCR 3.3) among 29 same-industry peers, split at the industry median of 56 employees and a TCR of 3.4

Huron Tool & Engineering has fewer employees than the Cutting dies, metalworking, manufacturin median and a lower injury rate than the industry's median TCR of 3.4. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 2.0 2.0 1 0 0
2023 1.9 0.0 1 0 0
2017 5.3 1.3 4 0 0
2016 4.2 0.0 3 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

333514 · MI · Bad Axe

387 Cutting dies, metalworking, manufacturing employers nationwide with a credible TCR · 16,393 rated employers in Michigan with headcount on file · 15 employers in Bad Axe, MI · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Omni Die & Engineering Inc. 3.4 TCR
NAICS-TCR MID-SOUTH/CENTRAL EXTRUSION 3.4 TCR
NAICS-TCR EBI MANUFACTURING LLC 3.4 TCR
NAICS-TCR Wisconsin Metal Parts, Inc. 3.4 TCR
STATE-SIZE 6375_14893 55 FTE
STATE-SIZE Ludington Pump Storage 55 FTE
STATE-SIZE Buchanan Office Nuclear 55 FTE
STATE-SIZE Three Mile Road Service Center 55 FTE
CITY-NEAR McLaren Thumb Region 306 FTE
CITY-NEAR 1592 266 FTE
CITY-NEAR WM 1592 255 FTE
CITY-NEAR 315 - Bad Axe 195 FTE
NAT-TCR TSL Curry Manor, LLC 3.3 TCR
NAT-TCR Farmers Friend 3.3 TCR
NAT-TCR 2017 Noblesville 3.3 TCR
NAT-TCR 3322 Pahrump 3.3 TCR
NAT-SIZE CBS iFOAM LLC 55 FTE
NAT-SIZE MCO-7100 55 FTE
NAT-SIZE DEN-3100 55 FTE
NAT-SIZE Ridgeview Health and Rehab Center 55 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2017, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.