Investment castings, nonferrous metal (except aluminum), unfinished, manufacturing · Massachusetts

IBC Engineered Materials

Wilmington, MA · ~34 workers · 8 years of OSHA Injury Tracking Application data.

F
Failing Safety Record
10.6
Avg TCR
3.3
Industry avg
0
Fatalities

The verdict

IBC Engineered Materials runs at 320% of its industry's injury rate - far more dangerous than the typical Investment castings, nonferrous metal (except aluminum), unfinished, manufacturing workplace, earning a grade F.

F
Failing Safety Record
10.6
avg TCR · per 100 workers
3.3
industry benchmark (BLS)
21
recordable injuries tracked

Grade compares IBC Engineered Materials's OSHA Total Case Rate of 10.6 to the Investment castings, nonferrous metal (except aluminum), unfinished, manufacturing BLS benchmark of 3.3 (320% of benchmark) across 8 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.

Injury rate over time

IBC Engineered Materials's yearly Total Case Rate, against the 3.3 industry benchmark.

051015 20162017201820192020202120222023 10.33.3 Industry benchmarkIBC Engineered Materials TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 331529.

Where IBC Engineered Materials falls in its industry

133 Investment castings, nonferrou establishments

Safer than 15% of graded establishments in this industry, whose median TCR is 4.5.

More dangerous than peersSafer than peers

Trend analysis for IBC Engineered Materials

Between 2016 and 2023, IBC Engineered Materials's Total Case Rate held roughly steady from 10.0 to 10.3 recordable injuries per 100 full-time workers, a 3% increase across 7 years of OSHA reporting.

The safest year on record was 2018, at a TCR of 8.1, while 2021 saw the highest rate, at 12.6, a spread of 4.5 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 8 years with a usable rate on file, rather than one outlier year skewing the multi-year average.

Summed across those 8 reporting years, IBC Engineered Materials recorded 21 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 8-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

The 21 injuries, 1 illnesses shown on this page for IBC Engineered Materials are sourced from its own 8 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 331529 - Investment castings, nonferrous metal (except aluminum), unfinished, manufacturing.

DART Rate, Transparent Calculation (2023)

What is the DART rate formula?

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

3 DART incidents × 200,000 ÷ 58,313 hours worked = 10.29 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
IBC Engineered Materials (this establishment) 10.57 OSHA ITA Form 300A, 8-year avg
Nonferrous Castings industry avg 3.30 BLS IIF, NAICS 331529
Massachusetts state avg (all industries) 4.94 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by IBC Engineered Materials to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2023 10.3 10.3 2 1 0
2022 12.0 6.0 4 0 0
2021 12.6 12.6 4 0 0
2020 9.5 4.7 2 0 0
2019 9.5 0.0 2 0 0
2018 8.1 4.1 2 0 0
2017 12.6 0.0 3 0 0
2016 10.0 0.0 2 0 0

What this grade means for you

Use this grade as a relative read on IBC Engineered Materials's reported OSHA injury record versus its Investment castings, nonferrous metal (except aluminum), unfinished, manufacturing peers, not a verdict on whether any single site is safe today.

  • At 320% of the Investment castings, nonferrous metal (except aluminum), unfinished, manufacturing benchmark, IBC Engineered Materials reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
  • Judge this record against the wider Investment castings, nonferrous metal (except aluminum), unfinished, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is IBC Engineered Materials's safety grade?
IBC Engineered Materials has a safety grade of F (Failing Safety Record). This grade is based on their average Total Case Rate (TCR) of 10.6 compared to the BLS industry benchmark of 3.3 for Investment castings, nonferrous metal (except aluminum), unfinished, manufacturing.
How many injuries has IBC Engineered Materials reported?
IBC Engineered Materials has reported 21 total injuries and 0 fatalities across 8 years of OSHA data (2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry, by workforce size within Massachusetts, and by nearby establishments in Wilmington - a different peer set than the category browse links below.

Similar TCR (~10.6)

Similar size (~34 workers)

Nearby in Wilmington

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.