Aluminum die-casting foundries · Illinois

Inland Die Casting, Inc

Wheeling, IL · ~179 workers · 8 years of OSHA Injury Tracking Application data.

F
Failing Safety Record
11.3
Avg TCR
3.3
Industry avg
0
Fatalities

The verdict

Inland Die Casting, Inc runs at 343% of its industry's injury rate - far more dangerous than the typical Aluminum die-casting foundries workplace, earning a grade F.

F
Failing Safety Record
11.3
avg TCR · per 100 workers
3.3
industry benchmark (BLS)
124
recordable injuries tracked

Grade compares Inland Die Casting, Inc's OSHA Total Case Rate of 11.3 to the Aluminum die-casting foundries BLS benchmark of 3.3 (343% of benchmark) across 8 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.

Injury rate over time

Inland Die Casting, Inc's yearly Total Case Rate, against the 3.3 industry benchmark.

0510152025 20172018201920202021202220232024 6.53.3 Industry benchmarkInland Die Casting, Inc TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 331523.

Where Inland Die Casting, Inc falls in its industry

223 Aluminum die-casting foundries establishments

Safer than 11% of graded establishments in this industry, whose median TCR is 4.7.

More dangerous than peersSafer than peers

Narrower to Illinois alone (the establishments it most directly competes with for workers and contracts): ranked #14 safest of 17 Aluminum die-casting foundries employers in Illinois.

Trend analysis for Inland Die Casting, Inc

Between 2017 and 2024, Inland Die Casting, Inc's Total Case Rate held roughly steady from 6.7 to 6.5 recordable injuries per 100 full-time workers, a 3% decrease across 7 years of OSHA reporting.

The safest year on record was 2019, at a TCR of 5.9, while 2022 saw the highest rate, at 22.5, a spread of 16.7 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.

Summed across those 8 reporting years, Inland Die Casting, Inc recorded 124 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 8-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

The 124 injuries, 24 illnesses shown on this page for Inland Die Casting, Inc are sourced from its own 8 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 331523 - Aluminum die-casting foundries.

DART Rate, Transparent Calculation (2024)

What is the DART rate formula?

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

4 DART incidents × 200,000 ÷ 154,388 hours worked = 5.18 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
Inland Die Casting, Inc (this establishment) 11.31 OSHA ITA Form 300A, 8-year avg
Aluminum die-castings, unfinished, manufacturing industry avg 3.30 BLS IIF, NAICS 331523
Illinois state avg (all industries) 4.73 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Inland Die Casting, Inc to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 6.5 5.2 4 1 0
2023 15.5 9.9 20 5 0
2022 22.5 14.2 31 4 0
2021 17.4 13.9 23 2 0
2020 6.8 3.0 6 3 0
2019 5.9 2.7 12 1 0
2018 9.2 2.6 14 7 0
2017 6.7 4.5 14 1 0

What this grade means for you

Use this grade as a relative read on Inland Die Casting, Inc's reported OSHA injury record versus its Aluminum die-casting foundries peers, not a verdict on whether any single site is safe today.

  • At 343% of the Aluminum die-casting foundries benchmark, Inland Die Casting, Inc reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
  • Judge this record against the wider Aluminum die-casting foundries sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is Inland Die Casting, Inc's safety grade?
Inland Die Casting, Inc has a safety grade of F (Failing Safety Record). This grade is based on their average Total Case Rate (TCR) of 11.3 compared to the BLS industry benchmark of 3.3 for Aluminum die-casting foundries.
How many injuries has Inland Die Casting, Inc reported?
Inland Die Casting, Inc has reported 124 total injuries and 0 fatalities across 8 years of OSHA data (2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry, by workforce size within Illinois, and by nearby establishments in Wheeling - a different peer set than the category browse links below.

Similar TCR (~11.3)

Similar size (~179 workers)

Nearby in Wheeling

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.