Home renovation · Wisconsin
James R. Taylor and Sons, Inc.
EAST TROY, WI · ~24 workers · 7 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 2.7
- Avg TCR
- 3.8
- Industry avg
- 0
- Fatalities
The verdict
James R. Taylor and Sons, Inc. runs at 72% of its industry's injury rate — safer than the typical Home renovation workplace — earning a grade B.
- B
- Good Safety Record
- 2.7
- avg TCR · per 100 workers
- 3.8
- industry benchmark (BLS)
- 4
- recordable injuries tracked
Grade compares James R. Taylor and Sons, Inc.'s OSHA Total Case Rate to the BLS industry benchmark across 7 years of Form 300A filings (2016–2024).
Injury rate over time
James R. Taylor and Sons, Inc.'s yearly Total Case Rate, against the 3.8 industry benchmark.
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 236118.
Where James R. Taylor and Sons, Inc. falls in its industry
788 Home renovation establishmentsSafer than 73% of graded establishments in this industry, whose median TCR is 5.4.
James R. Taylor and Sons, Inc. has an average TCR of 2.7, which is 72% of the industry average (3.8) for Home renovation. This is better than average.
Safety Insights for James R. Taylor and Sons, Inc.
James R. Taylor and Sons, Inc. operates an establishment with approximately 24 full-time equivalent workers in EAST TROY, WI, classified under the Home renovation industry (NAICS 236118). Across 7 years of mandatory OSHA Injury Tracking Application (ITA) reporting, this employer has accumulated 4 recordable injuries, 0 occupational illnesses, and 0 workplace fatalities. The average Total Case Rate (TCR) of 2.7 injuries per 100 full-time workers per year provides the anchor metric for the B letter grade (Good Safety Record).
Benchmarked against the Bureau of Labor Statistics industry average of 3.8 for Home renovation, James R. Taylor and Sons, Inc.'s workforce experiences 72% of the typical injury burden. This ratio matters because TCR already normalizes for hours worked — a 200,000-hour exposure base equals roughly 100 full-time workers — so establishments with very different headcounts can be compared directly. A TCR below the benchmark signals that controls, training, or automation may be outperforming peers.
Multi-year trend analysis is the single most reliable signal here: a one-year spike could reflect a single severe event, whereas sustained elevation across 7 reporting cycles points to systemic hazard exposure. Readers evaluating James R. Taylor and Sons, Inc. as an employer, contractor, investment, or regulatory target should examine the yearly DART rate (days away, restricted, or transferred), the fatality count of 0, and any year-over-year deterioration shown in the table below. All figures come directly from employer-submitted OSHA Form 300A summaries — there is no modeling, estimation, or third-party adjustment layered on top of the government data.
Verify This Employer with OSHA
All injury, illness, and fatality figures on this page are sourced from James R. Taylor and Sons, Inc.'s own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source — name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor — OSHA Establishment-Specific Injury and Illness Data. NAICS 236118 — Home renovation.
DART Rate — Transparent Calculation (2024)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
0 DART incidents × 200,000 ÷ 46,749 hours worked = 0.00 DART
Methodology: 29 CFR 1904 — OSHA Form 300A recordkeeping
Cross-Validating Context — Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| James R. Taylor and Sons, Inc. (this establishment) | 2.73 | OSHA ITA Form 300A, 7-year avg |
| Construction management, residential remodeling industry avg | 3.80 | BLS IIF, NAICS 236118 |
| Wisconsin state avg (all industries) | 4.92 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics — Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by James R. Taylor and Sons, Inc. to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2023: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2022: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2021: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2018: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2017: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2016: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) — inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2023 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2022 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2021 | 3.5 | 3.5 | 1 | 0 | 0 |
| 2018 | 4.7 | 4.7 | 1 | 0 | 0 |
| 2017 | 10.9 | 5.5 | 2 | 0 | 0 |
| 2016 | 0.0 | 0.0 | 0 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on James R. Taylor and Sons, Inc.'s reported OSHA injury record — strong versus its Home renovation peers, but not a guarantee about any single site today.
- At 72% of the Home renovation benchmark, James R. Taylor and Sons, Inc. reports fewer injuries than typical peers — still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Home renovation sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is James R. Taylor and Sons, Inc.'s safety grade?
How is the safety grade calculated?
How many injuries has James R. Taylor and Sons, Inc. reported?
Where does PlainSafetyScore get its data?
Explore More Safety Data
Read our methodology — how this data is sourced, computed, and verified.