Ductile iron castings, unfinished, manufacturing · Iowa
John Deere Waterloo Foundry
Waterloo, IA · ~546 workers · 2 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 6.6
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
John Deere Waterloo Foundry runs at 201% of its industry's injury rate - far more dangerous than the typical Ductile iron castings, unfinished, manufacturing workplace, earning a grade F.
- F
- Failing Safety Record
- 6.6
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 59
- recordable injuries tracked
Grade compares John Deere Waterloo Foundry's OSHA Total Case Rate of 6.6 to the Ductile iron castings, unfinished, manufacturing BLS benchmark of 3.3 (201% of benchmark) across 2 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.
Injury rate over time
John Deere Waterloo Foundry's yearly Total Case Rate, against the 3.3 industry benchmark.
Where John Deere Waterloo Foundry falls in its industry
281 Ductile iron castings, unfinis establishmentsSafer than 53% of graded establishments in this industry, whose median TCR is 7.2.
Narrower to Iowa alone (the establishments it most directly competes with for workers and contracts): ranked #6 safest of 14 Ductile iron castings, unfinis employers in Iowa.
Trend analysis for John Deere Waterloo Foundry
Between 2019 and 2024, John Deere Waterloo Foundry's Total Case Rate improved from 7.1 to 6.2 recordable injuries per 100 full-time workers, a 12% decrease across 5 years of OSHA reporting.
The safest year on record was 2024, at a TCR of 6.2, while 2019 saw the highest rate, at 7.1, a spread of 0.9 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 2 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 2 reporting years, John Deere Waterloo Foundry recorded 59 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 59 injuries, 6 illnesses shown on this page for John Deere Waterloo Foundry are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 331511 - Ductile iron castings, unfinished, manufacturing.
DART Rate, Transparent Calculation (2024)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
13 DART incidents × 200,000 ÷ 967,141 hours worked = 2.69 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| John Deere Waterloo Foundry (this establishment) | 6.63 | OSHA ITA Form 300A, 2-year avg |
| Gray iron foundries industry avg | 3.30 | BLS IIF, NAICS 331511 |
| Iowa state avg (all industries) | 5.33 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by John Deere Waterloo Foundry to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 30 reportable incidents · 27 injuries, 3 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 35 reportable incidents · 32 injuries, 3 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 6.2 | 2.7 | 27 | 3 | 0 |
| 2019 | 7.1 | 3.8 | 32 | 3 | 0 |
What this grade means for you
Use this grade as a relative read on John Deere Waterloo Foundry's reported OSHA injury record versus its Ductile iron castings, unfinished, manufacturing peers, not a verdict on whether any single site is safe today.
- At 201% of the Ductile iron castings, unfinished, manufacturing benchmark, John Deere Waterloo Foundry reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Ductile iron castings, unfinished, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is John Deere Waterloo Foundry's safety grade?
How many injuries has John Deere Waterloo Foundry reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Iowa, and by nearby establishments in Waterloo - a different peer set than the category browse links below.
Similar TCR (~6.6)
Similar size (~546 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.