Car bodies, kit, manufacturing · Ohio
KTH Parts Industries
St. Paris, OH · ~1,039 workers · 7 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 2.0
- Avg TCR
- 3.3
- Industry avg
- 1
- Fatality
The verdict
KTH Parts Industries runs at 60% of its industry's injury rate - safer than the typical Car bodies, kit, manufacturing workplace, earning a grade B.
- B
- Good Safety Record
- 2.0
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 1
- worker fatalities on record
Grade compares KTH Parts Industries's OSHA Total Case Rate of 2.0 to the Car bodies, kit, manufacturing BLS benchmark of 3.3 (60% of benchmark) across 7 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
KTH Parts Industries's yearly Total Case Rate, against the 3.3 industry benchmark.
Where KTH Parts Industries falls in its industry
481 Car bodies, kit, manufacturing establishmentsSafer than 88% of graded establishments in this industry, whose median TCR is 5.3.
Narrower to Ohio alone (the establishments it most directly competes with for workers and contracts): ranked #7 safest of 39 Car bodies, kit, manufacturing employers in Ohio.
Trend analysis for KTH Parts Industries
Between 2016 and 2024, KTH Parts Industries's Total Case Rate improved from 2.1 to 0.9 recordable injuries per 100 full-time workers, a 55% decrease across 8 years of OSHA reporting.
The safest year on record was 2024, at a TCR of 0.9, while 2019 saw the highest rate, at 3.0, a spread of 2.1 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 7 reporting years, KTH Parts Industries recorded 144 total injuries and illnesses and 1 fatality. Readers comparing establishments should weigh the 7-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 144 injuries, and 1 fatality shown on this page for KTH Parts Industries are sourced from its own 7 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 336211 - Car bodies, kit, manufacturing.
DART Rate, Transparent Calculation (2024)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
9 DART incidents × 200,000 ÷ 1,907,734 hours worked = 0.94 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| KTH Parts Industries (this establishment) | 1.98 | OSHA ITA Form 300A, 7-year avg |
| Special purpose highway vehicle (e.g., firefighting vehicles) assembling on purchased chassis industry avg | 3.30 | BLS IIF, NAICS 336211 |
| Ohio state avg (all industries) | 3.90 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by KTH Parts Industries to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 9 reportable incidents · 9 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 14 reportable incidents · 14 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2022: 14 reportable incidents · 14 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2021: 20 reportable incidents · 19 injuries, 0 illnesses, 1 fatality - OSHA inspection records (case numbers)
- 2019: 33 reportable incidents · 33 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2018: 31 reportable incidents · 31 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 24 reportable incidents · 24 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 0.9 | 0.9 | 9 | 0 | 0 |
| 2023 | 1.4 | 1.0 | 14 | 0 | 0 |
| 2022 | 1.6 | 1.2 | 14 | 0 | 0 |
| 2021 | 2.1 | 1.9 | 19 | 0 | 1 |
| 2019 | 3.0 | 2.3 | 33 | 0 | 0 |
| 2018 | 2.7 | 1.8 | 31 | 0 | 0 |
| 2016 | 2.1 | 1.5 | 24 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on KTH Parts Industries's reported OSHA injury record, strong versus its Car bodies, kit, manufacturing peers, but not a guarantee about any single site today.
- At 60% of the Car bodies, kit, manufacturing benchmark, KTH Parts Industries reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Car bodies, kit, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is KTH Parts Industries's safety grade?
How many injuries has KTH Parts Industries reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Ohio, and by nearby establishments in St. Paris - a different peer set than the category browse links below.
Similar TCR (~2.0)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.