Downspout, gutter, and gutter guard installation · Georgia
LeafGuard of Southern Georgia
Columbus, GA · ~26 workers · 3 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 3.6
- Avg TCR
- 2.8
- Industry avg
- 0
- Fatalities
The verdict
LeafGuard of Southern Georgia runs at 127% of its industry's injury rate - more dangerous than the typical Downspout, gutter, and gutter guard installation workplace, earning a grade D.
- D
- Poor Safety Record
- 3.6
- avg TCR · per 100 workers
- 2.8
- industry benchmark (BLS)
- 2
- recordable injuries tracked
Grade compares LeafGuard of Southern Georgia's OSHA Total Case Rate of 3.6 to the Downspout, gutter, and gutter guard installation BLS benchmark of 2.8 (127% of benchmark) across 3 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
LeafGuard of Southern Georgia's yearly Total Case Rate, against the 2.8 industry benchmark.
Where LeafGuard of Southern Georgia falls in its industry
160 Downspout, gutter, and gutter establishmentsSafer than 52% of graded establishments in this industry, whose median TCR is 3.7.
Narrower to Georgia alone (the establishments it most directly competes with for workers and contracts): ranked #4 safest of 5 Downspout, gutter, and gutter employers in Georgia.
Trend analysis for LeafGuard of Southern Georgia
Between 2020 and 2023, LeafGuard of Southern Georgia's Total Case Rate held roughly steady from 0.0 to 4.9 recordable injuries per 100 full-time workers, a 0% change across 3 years of OSHA reporting.
The safest year on record was 2020, at a TCR of 0.0, while 2022 saw the highest rate, at 5.8, a spread of 5.8 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 3 reporting years, LeafGuard of Southern Georgia recorded 2 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 3-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 2 injuries shown on this page for LeafGuard of Southern Georgia are sourced from its own 3 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 238170 - Downspout, gutter, and gutter guard installation.
DART Rate, Transparent Calculation (2023)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
1 DART incidents × 200,000 ÷ 40,741 hours worked = 4.91 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| LeafGuard of Southern Georgia (this establishment) | 3.56 | OSHA ITA Form 300A, 3-year avg |
| Aluminum siding installation industry avg | 2.80 | BLS IIF, NAICS 238170 |
| Georgia state avg (all industries) | 4.11 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by LeafGuard of Southern Georgia to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2023: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2022: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2023 | 4.9 | 4.9 | 1 | 0 | 0 |
| 2022 | 5.8 | 5.8 | 1 | 0 | 0 |
| 2020 | 0.0 | 0.0 | 0 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on LeafGuard of Southern Georgia's reported OSHA injury record versus its Downspout, gutter, and gutter guard installation peers, not a verdict on whether any single site is safe today.
- At 127% of the Downspout, gutter, and gutter guard installation benchmark, LeafGuard of Southern Georgia reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Downspout, gutter, and gutter guard installation sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is LeafGuard of Southern Georgia's safety grade?
How many injuries has LeafGuard of Southern Georgia reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Georgia, and by nearby establishments in Columbus - a different peer set than the category browse links below.
Similar TCR (~3.6)
Similar size (~26 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.