Sheet metal forming machines manufacturing · New York

LVD Strippit, Inc.

Akron, NY · ~120 workers · 5 years of OSHA Injury Tracking Application data.

Compiled by PlainSafetyScore Editorial, Employer Workplace Safety Editorial Team

F
Failing Safety Record: 7.8
Avg TCR: 3.3
Industry avg: 0
Fatalities

The verdict

LVD Strippit, Inc. runs at 237% of its industry's injury rate - far more dangerous than the typical Sheet metal forming machines manufacturing workplace, earning a grade F.

F
Failing Safety Record: 7.8
avg TCR · per 100 workers: 3.3
industry benchmark (BLS): 37
recordable injuries tracked

Grade compares LVD Strippit, Inc.'s OSHA Total Case Rate of 7.8 to the Sheet metal forming machines manufacturing BLS benchmark of 3.3 (237% of benchmark) across 5 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.

Injury rate over time

LVD Strippit, Inc.'s yearly Total Case Rate, against the 3.3 industry benchmark.

Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 333517.

Where LVD Strippit, Inc. falls in its industry

429 Sheet metal forming machines m establishments

Safer than 13% of graded establishments in this industry, whose median TCR is 3.1.

Grade F

More dangerous than peersSafer than peers

Narrower to New York alone (the establishments it most directly competes with for workers and contracts): ranked #20 safest of 20 Sheet metal forming machines m employers in New York.

Trend analysis for LVD Strippit, Inc.

Between 2017 and 2021, LVD Strippit, Inc.'s Total Case Rate improved from 12.8 to 6.0 recordable injuries per 100 full-time workers, a 53% decrease across 4 years of OSHA reporting.

The safest year on record was 2020, at a TCR of 2.5, while 2018 saw the highest rate, at 13.3, a spread of 10.7 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.

Summed across those 5 reporting years, LVD Strippit, Inc. recorded 37 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 5-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

The 37 injuries, 10 illnesses shown on this page for LVD Strippit, Inc. are sourced from its own 5 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 333517 - Sheet metal forming machines manufacturing.

DART Rate, Transparent Calculation (2021)

What is the DART rate formula?

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

6 DART incidents × 200,000 ÷ 234,525 hours worked = 5.12 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark	TCR	Source
LVD Strippit, Inc. (this establishment)	7.83	OSHA ITA Form 300A, 5-year avg
Sheet metal forming machines manufacturing industry avg	3.30	BLS IIF, NAICS 333517
New York state avg (all industries)	4.67	OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by LVD Strippit, Inc. to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

2021: 7 reportable incidents · 6 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
2020: 3 reportable incidents · 2 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
2019: 6 reportable incidents · 6 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
2018: 16 reportable incidents · 10 injuries, 6 illnesses, 0 fatalities - OSHA inspection records (case numbers)
2017: 15 reportable incidents · 13 injuries, 2 illnesses, 0 fatalities - OSHA inspection records (case numbers)

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year	TCR	DART	Injuries	Illnesses
2021	6.0	5.1	6	1
2020	2.5	1.7	2	1
2019	4.6	2.3	6	0
2018	13.3	5.8	10	6
2017	12.8	6.8	13	2

What this grade means for you

Use this grade as a relative read on LVD Strippit, Inc.'s reported OSHA injury record versus its Sheet metal forming machines manufacturing peers, not a verdict on whether any single site is safe today.

At 237% of the Sheet metal forming machines manufacturing benchmark, LVD Strippit, Inc. reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
Judge this record against the wider Sheet metal forming machines manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is LVD Strippit, Inc.'s safety grade?

LVD Strippit, Inc. has a safety grade of F (Failing Safety Record). This grade is based on their average Total Case Rate (TCR) of 7.8 compared to the BLS industry benchmark of 3.3 for Sheet metal forming machines manufacturing.

How many injuries has LVD Strippit, Inc. reported?

LVD Strippit, Inc. has reported 37 total injuries and 0 fatalities across 5 years of OSHA data (2021, 2020, 2019, 2018, 2017). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry, by workforce size within New York, and by nearby establishments in Akron - a different peer set than the category browse links below.

Similar TCR (~7.8)

Similar size (~120 workers)

Nearby in Akron

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2021, 2020, 2019, 2018, 2017. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.