Pumps, industrial and commercial-type, general purpose, manufacturing · Iowa
Machine Shop (A Unit of IDEX Corporation)
Cedar Falls, IA · ~219 workers · 5 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 2.1
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Machine Shop (A Unit of IDEX Corporation) runs at 64% of its industry's injury rate - safer than the typical Pumps, industrial and commercial-type, general purpose, manufacturing workplace, earning a grade B.
- B
- Good Safety Record
- 2.1
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 16
- recordable injuries tracked
Grade compares Machine Shop (A Unit of IDEX Corporation)'s OSHA Total Case Rate of 2.1 to the Pumps, industrial and commercial-type, general purpose, manufacturing BLS benchmark of 3.3 (64% of benchmark) across 5 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Machine Shop (A Unit of IDEX Corporation)'s yearly Total Case Rate, against the 3.3 industry benchmark.
Where Machine Shop (A Unit of IDEX Corporation) falls in its industry
212 Pumps, industrial and commerci establishmentsSafer than 52% of graded establishments in this industry, whose median TCR is 2.2.
Narrower to Iowa alone (the establishments it most directly competes with for workers and contracts): ranked #3 safest of 5 Pumps, industrial and commerci employers in Iowa.
Trend analysis for Machine Shop (A Unit of IDEX Corporation)
Between 2016 and 2021, Machine Shop (A Unit of IDEX Corporation)'s Total Case Rate worsened from 1.3 to 3.5 recordable injuries per 100 full-time workers, a 174% increase across 5 years of OSHA reporting.
The safest year on record was 2018, at a TCR of 0.4, while 2021 saw the highest rate, at 3.5, a spread of 3.1 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 5 reporting years, Machine Shop (A Unit of IDEX Corporation) recorded 16 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 5-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 16 injuries, 6 illnesses shown on this page for Machine Shop (A Unit of IDEX Corporation) are sourced from its own 5 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 333911 - Pumps, industrial and commercial-type, general purpose, manufacturing.
DART Rate, Transparent Calculation (2021)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
4 DART incidents × 200,000 ÷ 395,300 hours worked = 2.02 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Machine Shop (A Unit of IDEX Corporation) (this establishment) | 2.11 | OSHA ITA Form 300A, 5-year avg |
| Oil-well and oil-field pumps manufacturing industry avg | 3.30 | BLS IIF, NAICS 333911 |
| Iowa state avg (all industries) | 5.33 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Machine Shop (A Unit of IDEX Corporation) to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2021: 7 reportable incidents · 2 injuries, 5 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 6 reportable incidents · 5 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 5 reportable incidents · 5 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2018: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2021 | 3.5 | 2.0 | 2 | 5 | 0 |
| 2020 | 3.1 | 2.1 | 5 | 1 | 0 |
| 2019 | 2.2 | 0.9 | 5 | 0 | 0 |
| 2018 | 0.4 | 0.0 | 1 | 0 | 0 |
| 2016 | 1.3 | 1.3 | 3 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Machine Shop (A Unit of IDEX Corporation)'s reported OSHA injury record, strong versus its Pumps, industrial and commercial-type, general purpose, manufacturing peers, but not a guarantee about any single site today.
- At 64% of the Pumps, industrial and commercial-type, general purpose, manufacturing benchmark, Machine Shop (A Unit of IDEX Corporation) reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Pumps, industrial and commercial-type, general purpose, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Machine Shop (A Unit of IDEX Corporation)'s safety grade?
How many injuries has Machine Shop (A Unit of IDEX Corporation) reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Iowa, and by nearby establishments in Cedar Falls - a different peer set than the category browse links below.
Similar TCR (~2.1)
Similar size (~219 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.