Awnings, rigid plastics or fiberglass, manufacturing · Wisconsin
MasterMold LLC Johnson Creek
Johnson Creek, WI · ~280 workers · 7 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 5.9
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
MasterMold LLC Johnson Creek runs at 180% of its industry's injury rate - more dangerous than the typical Awnings, rigid plastics or fiberglass, manufacturing workplace, earning a grade D.
- D
- Poor Safety Record
- 5.9
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 120
- recordable injuries tracked
Grade compares MasterMold LLC Johnson Creek's OSHA Total Case Rate of 5.9 to the Awnings, rigid plastics or fiberglass, manufacturing BLS benchmark of 3.3 (180% of benchmark) across 7 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
MasterMold LLC Johnson Creek's yearly Total Case Rate, against the 3.3 industry benchmark.
Where MasterMold LLC Johnson Creek falls in its industry
2,995 Awnings, rigid plastics or fib establishmentsSafer than 23% of graded establishments in this industry, whose median TCR is 3.4.
Narrower to Wisconsin alone (the establishments it most directly competes with for workers and contracts): ranked #141 safest of 173 Awnings, rigid plastics or fib employers in Wisconsin.
Trend analysis for MasterMold LLC Johnson Creek
Between 2016 and 2024, MasterMold LLC Johnson Creek's Total Case Rate worsened from 1.0 to 3.4 recordable injuries per 100 full-time workers, a 238% increase across 8 years of OSHA reporting.
The safest year on record was 2016, at a TCR of 1.0, while 2021 saw the highest rate, at 12.3, a spread of 11.3 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 7 reporting years, MasterMold LLC Johnson Creek recorded 120 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 7-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 120 injuries, 2 illnesses shown on this page for MasterMold LLC Johnson Creek are sourced from its own 7 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 326199 - Awnings, rigid plastics or fiberglass, manufacturing.
DART Rate, Transparent Calculation (2024)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
7 DART incidents × 200,000 ÷ 775,810 hours worked = 1.80 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| MasterMold LLC Johnson Creek (this establishment) | 5.94 | OSHA ITA Form 300A, 7-year avg |
| Fiberglass Pool Manufacturing industry avg | 3.30 | BLS IIF, NAICS 326199 |
| Wisconsin state avg (all industries) | 4.92 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by MasterMold LLC Johnson Creek to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 13 reportable incidents · 13 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 21 reportable incidents · 21 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2022: 22 reportable incidents · 21 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2021: 22 reportable incidents · 22 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 7 reportable incidents · 7 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 16 reportable incidents · 16 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 21 reportable incidents · 20 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 3.4 | 1.8 | 13 | 0 | 0 |
| 2023 | 6.8 | 3.2 | 21 | 0 | 0 |
| 2022 | 7.5 | 4.1 | 21 | 1 | 0 |
| 2021 | 12.3 | 7.8 | 22 | 0 | 0 |
| 2020 | 5.2 | 3.0 | 7 | 0 | 0 |
| 2019 | 5.4 | 3.0 | 16 | 0 | 0 |
| 2016 | 1.0 | 0.8 | 20 | 1 | 0 |
What this grade means for you
Use this grade as a relative read on MasterMold LLC Johnson Creek's reported OSHA injury record versus its Awnings, rigid plastics or fiberglass, manufacturing peers, not a verdict on whether any single site is safe today.
- At 180% of the Awnings, rigid plastics or fiberglass, manufacturing benchmark, MasterMold LLC Johnson Creek reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Awnings, rigid plastics or fiberglass, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is MasterMold LLC Johnson Creek's safety grade?
How many injuries has MasterMold LLC Johnson Creek reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Wisconsin, and by nearby establishments in Johnson Creek - a different peer set than the category browse links below.
Similar TCR (~5.9)
Similar size (~280 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.