Supermarkets · Michigan
Meijer 208
LINCOLN PARK, MI · ~258 workers · 3 years of OSHA Injury Tracking Application data.
- A
- Excellent Safety Record
- 0.0
- Avg TCR
- 3.4
- Industry avg
- 0
- Fatalities
The verdict
Meijer 208 runs at 0% of its industry's injury rate - far safer than the typical Supermarkets workplace, earning a grade A.
- A
- Excellent Safety Record
- 0.0
- avg TCR · per 100 workers
- 3.4
- industry benchmark (BLS)
- 5
- recordable injuries tracked
Grade compares Meijer 208's OSHA Total Case Rate to the BLS industry benchmark across 3 years of Form 300A filings (2016–2024).
Injury rate over time
Meijer 208's yearly Total Case Rate, against the 3.4 industry benchmark.
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 445110.
Where Meijer 208 falls in its industry
31,897 Supermarkets establishmentsSafer than 96% of graded establishments in this industry, whose median TCR is 4.5.
Meijer 208 has an average TCR of 0.0, which is 0% of the industry average (3.4) for Supermarkets. This is significantly better than average.
Safety Insights for Meijer 208
Meijer 208 operates an establishment with approximately 258 full-time equivalent workers in LINCOLN PARK, MI, classified under the Supermarkets industry (NAICS 445110). Across 3 years of mandatory OSHA Injury Tracking Application (ITA) reporting, this employer has accumulated 5 recordable injuries, 0 occupational illnesses, and 0 workplace fatalities. The average Total Case Rate (TCR) of 0.0 injuries per 100 full-time workers per year provides the anchor metric for the A letter grade (Excellent Safety Record).
Benchmarked against the Bureau of Labor Statistics industry average of 3.4 for Supermarkets, Meijer 208's workforce experiences 0% of the typical injury burden. This ratio matters because TCR already normalizes for hours worked, a 200,000-hour exposure base equals roughly 100 full-time workers, so establishments with very different headcounts can be compared directly. A TCR below the benchmark signals that controls, training, or automation may be outperforming peers.
Multi-year trend analysis is the single most reliable signal here: a one-year spike could reflect a single severe event, whereas sustained elevation across 3 reporting cycles points to systemic hazard exposure. Readers evaluating Meijer 208 as an employer, contractor, investment, or regulatory target should examine the yearly DART rate (days away, restricted, or transferred), the fatality count of 0, and any year-over-year deterioration shown in the table below. All figures come directly from employer-submitted OSHA Form 300A summaries, there is no modeling, estimation, or third-party adjustment layered on top of the government data.
Verify This Employer with OSHA
All injury, illness, and fatality figures on this page are sourced from Meijer 208's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 445110 - Supermarkets.
DART Rate, Transparent Calculation (2020)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
4 DART incidents × 200,000 ÷ 40,458,710 hours worked = 0.02 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Meijer 208 (this establishment) | 0.01 | OSHA ITA Form 300A, 3-year avg |
| Grocery stores industry avg | 3.40 | BLS IIF, NAICS 445110 |
| Michigan state avg (all industries) | 4.73 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Meijer 208 to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2020: 4 reportable incidents · 4 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2018: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2020 | 0.0 | 0.0 | 4 | 0 | 0 |
| 2018 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2017 | 0.0 | 0.0 | 1 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Meijer 208's reported OSHA injury record, strong versus its Supermarkets peers, but not a guarantee about any single site today.
- At 0% of the Supermarkets benchmark, Meijer 208 reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Supermarkets sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Meijer 208's safety grade?
How is the safety grade calculated?
How many injuries has Meijer 208 reported?
Where does PlainSafetyScore get its data?
Explore More Safety Data
Read our methodology - how this data is sourced, computed, and verified.