Ready-mix concrete manufacturing and distributing · Wisconsin
Merrill - CRM
MERRILL, WI · ~19 workers · 2 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 2.7
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Merrill - CRM runs at 83% of its industry's injury rate — about level with the typical Ready-mix concrete manufacturing and distributing workplace — earning a grade C.
- C
- Average Safety Record
- 2.7
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 1
- recordable injuries tracked
Grade compares Merrill - CRM's OSHA Total Case Rate to the BLS industry benchmark across 2 years of Form 300A filings (2016–2024).
Injury rate over time
Merrill - CRM's yearly Total Case Rate, against the 3.3 industry benchmark.
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 327320.
Where Merrill - CRM falls in its industry
1,465 Ready-mix concrete manufacturi establishmentsSafer than 63% of graded establishments in this industry, whose median TCR is 4.0.
Merrill - CRM has an average TCR of 2.7, which is 83% of the industry average (3.3) for Ready-mix concrete manufacturing and distributing. This is better than average.
Safety Insights for Merrill - CRM
Merrill - CRM operates an establishment with approximately 19 full-time equivalent workers in MERRILL, WI, classified under the Ready-mix concrete manufacturing and distributing industry (NAICS 327320). Across 2 years of mandatory OSHA Injury Tracking Application (ITA) reporting, this employer has accumulated 1 recordable injuries, 0 occupational illnesses, and 0 workplace fatalities. The average Total Case Rate (TCR) of 2.7 injuries per 100 full-time workers per year provides the anchor metric for the C letter grade (Average Safety Record).
Benchmarked against the Bureau of Labor Statistics industry average of 3.3 for Ready-mix concrete manufacturing and distributing, Merrill - CRM's workforce experiences 83% of the typical injury burden. This ratio matters because TCR already normalizes for hours worked — a 200,000-hour exposure base equals roughly 100 full-time workers — so establishments with very different headcounts can be compared directly. A TCR below the benchmark signals that controls, training, or automation may be outperforming peers.
Multi-year trend analysis is the single most reliable signal here: a one-year spike could reflect a single severe event, whereas sustained elevation across 2 reporting cycles points to systemic hazard exposure. Readers evaluating Merrill - CRM as an employer, contractor, investment, or regulatory target should examine the yearly DART rate (days away, restricted, or transferred), the fatality count of 0, and any year-over-year deterioration shown in the table below. All figures come directly from employer-submitted OSHA Form 300A summaries — there is no modeling, estimation, or third-party adjustment layered on top of the government data.
Verify This Employer with OSHA
All injury, illness, and fatality figures on this page are sourced from Merrill - CRM's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source — name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor — OSHA Establishment-Specific Injury and Illness Data. NAICS 327320 — Ready-mix concrete manufacturing and distributing.
DART Rate — Transparent Calculation (2024)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
1 DART incidents × 200,000 ÷ 36,630 hours worked = 5.46 DART
Methodology: 29 CFR 1904 — OSHA Form 300A recordkeeping
Cross-Validating Context — Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Merrill - CRM (this establishment) | 2.73 | OSHA ITA Form 300A, 2-year avg |
| Ready-mix concrete manufacturing and distributing industry avg | 3.30 | BLS IIF, NAICS 327320 |
| Wisconsin state avg (all industries) | 4.92 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics — Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Merrill - CRM to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2023: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) — inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 5.5 | 5.5 | 1 | 0 | 0 |
| 2023 | 0.0 | 0.0 | 0 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Merrill - CRM's reported OSHA injury record — strong versus its Ready-mix concrete manufacturing and distributing peers, but not a guarantee about any single site today.
- At 83% of the Ready-mix concrete manufacturing and distributing benchmark, Merrill - CRM reports fewer injuries than typical peers — still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Ready-mix concrete manufacturing and distributing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Merrill - CRM's safety grade?
How is the safety grade calculated?
How many injuries has Merrill - CRM reported?
Where does PlainSafetyScore get its data?
Explore More Safety Data
Read our methodology — how this data is sourced, computed, and verified.