Custom roll forming metal products · Ohio
Mid-Ohio Tubing, LLC - Butler
BUTLER, OH · ~35 workers · 5 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 17.4
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Mid-Ohio Tubing, LLC - Butler runs at 527% of its industry's injury rate - far more dangerous than the typical Custom roll forming metal products workplace, earning a grade F.
- F
- Failing Safety Record
- 17.4
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 43
- recordable injuries tracked
Grade compares Mid-Ohio Tubing, LLC - Butler's OSHA Total Case Rate to the BLS industry benchmark across 5 years of Form 300A filings (2016–2024).
Injury rate over time
Mid-Ohio Tubing, LLC - Butler's yearly Total Case Rate, against the 3.3 industry benchmark.
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 332114.
Where Mid-Ohio Tubing, LLC - Butler falls in its industry
101 Custom roll forming metal prod establishmentsSafer than 2% of graded establishments in this industry, whose median TCR is 5.0.
Mid-Ohio Tubing, LLC - Butler has an average TCR of 17.4, which is 527% of the industry average (3.3) for Custom roll forming metal products. This is significantly worse than average.
Safety Insights for Mid-Ohio Tubing, LLC - Butler
Mid-Ohio Tubing, LLC - Butler operates an establishment with approximately 35 full-time equivalent workers in BUTLER, OH, classified under the Custom roll forming metal products industry (NAICS 332114). Across 5 years of mandatory OSHA Injury Tracking Application (ITA) reporting, this employer has accumulated 43 recordable injuries, 1 occupational illnesses, and 0 workplace fatalities. The average Total Case Rate (TCR) of 17.4 injuries per 100 full-time workers per year provides the anchor metric for the F letter grade (Failing Safety Record).
Benchmarked against the Bureau of Labor Statistics industry average of 3.3 for Custom roll forming metal products, Mid-Ohio Tubing, LLC - Butler's workforce experiences 527% of the typical injury burden. This ratio matters because TCR already normalizes for hours worked, a 200,000-hour exposure base equals roughly 100 full-time workers, so establishments with very different headcounts can be compared directly. A TCR above the benchmark flags a higher-than-typical risk profile for jobseekers, insurers, and enforcement agencies to examine.
Multi-year trend analysis is the single most reliable signal here: a one-year spike could reflect a single severe event, whereas sustained elevation across 5 reporting cycles points to systemic hazard exposure. Readers evaluating Mid-Ohio Tubing, LLC - Butler as an employer, contractor, investment, or regulatory target should examine the yearly DART rate (days away, restricted, or transferred), the fatality count of 0, and any year-over-year deterioration shown in the table below. All figures come directly from employer-submitted OSHA Form 300A summaries, there is no modeling, estimation, or third-party adjustment layered on top of the government data.
Verify This Employer with OSHA
All injury, illness, and fatality figures on this page are sourced from Mid-Ohio Tubing, LLC - Butler's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 332114 - Custom roll forming metal products.
DART Rate, Transparent Calculation (2020)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
0 DART incidents × 200,000 ÷ 11,039 hours worked = 0.00 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Mid-Ohio Tubing, LLC - Butler (this establishment) | 17.40 | OSHA ITA Form 300A, 5-year avg |
| Custom roll forming metal products industry avg | 3.30 | BLS IIF, NAICS 332114 |
| Ohio state avg (all industries) | 3.90 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Mid-Ohio Tubing, LLC - Butler to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2020: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 5 reportable incidents · 5 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2018: 13 reportable incidents · 13 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 9 reportable incidents · 9 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 17 reportable incidents · 16 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2020 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2019 | 14.7 | 14.7 | 5 | 0 | 0 |
| 2018 | 25.1 | 19.4 | 13 | 0 | 0 |
| 2017 | 13.7 | 10.6 | 9 | 0 | 0 |
| 2016 | 33.5 | 17.7 | 16 | 1 | 0 |
What this grade means for you
Use this grade as a relative read on Mid-Ohio Tubing, LLC - Butler's reported OSHA injury record versus its Custom roll forming metal products peers, not a verdict on whether any single site is safe today.
- At 527% of the Custom roll forming metal products benchmark, Mid-Ohio Tubing, LLC - Butler reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Custom roll forming metal products sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Mid-Ohio Tubing, LLC - Butler's safety grade?
How is the safety grade calculated?
How many injuries has Mid-Ohio Tubing, LLC - Butler reported?
Where does PlainSafetyScore get its data?
Explore More Safety Data
Read our methodology - how this data is sourced, computed, and verified.