Addition, alteration and renovation general contractors, commercial warehouse · Arizona
Miner SW Tempe
TEMPE, AZ · ~40 workers · 3 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 4.4
- Avg TCR
- 2.9
- Industry avg
- 0
- Fatalities
The verdict
Miner SW Tempe runs at 151% of its industry's injury rate - more dangerous than the typical Addition, alteration and renovation general contractors, commercial warehouse workplace, earning a grade D.
- D
- Poor Safety Record
- 4.4
- avg TCR · per 100 workers
- 2.9
- industry benchmark (BLS)
- 5
- recordable injuries tracked
Grade compares Miner SW Tempe's OSHA Total Case Rate to the BLS industry benchmark across 3 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.
Injury rate over time
Miner SW Tempe's yearly Total Case Rate, against the 2.9 industry benchmark.
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 236220.
Where Miner SW Tempe falls in its industry
6,114 Addition, alteration and renov establishmentsSafer than 20% of graded establishments in this industry, whose median TCR is 1.5.
Miner SW Tempe has an average TCR of 4.4, which is 151% of the industry average (2.9) for Addition, alteration and renovation general contractors, commercial warehouse. This is worse than average.
Safety Insights for Miner SW Tempe
Miner SW Tempe operates an establishment with approximately 40 full-time equivalent workers in TEMPE, AZ, classified under the Addition, alteration and renovation general contractors, commercial warehouse industry (NAICS 236220). Across 3 years of mandatory OSHA Injury Tracking Application (ITA) reporting, this employer has accumulated 5 recordable injuries, 0 occupational illnesses, and 0 workplace fatalities. The average Total Case Rate (TCR) of 4.4 injuries per 100 full-time workers per year provides the anchor metric for the D letter grade (Poor Safety Record).
Benchmarked against the Bureau of Labor Statistics industry average of 2.9 for Addition, alteration and renovation general contractors, commercial warehouse, Miner SW Tempe's workforce experiences 151% of the typical injury burden. This ratio matters because TCR already normalizes for hours worked, a 200,000-hour exposure base equals roughly 100 full-time workers, so establishments with very different headcounts can be compared directly. A TCR above the benchmark flags a higher-than-typical risk profile for jobseekers, insurers, and enforcement agencies to examine.
Multi-year trend analysis is the single most reliable signal here: a one-year spike could reflect a single severe event, whereas sustained elevation across 3 reporting cycles points to systemic hazard exposure. Readers evaluating Miner SW Tempe as an employer, contractor, investment, or regulatory target should examine the yearly DART rate (days away, restricted, or transferred), the fatality count of 0, and any year-over-year deterioration shown in the table below. All figures come directly from employer-submitted OSHA Form 300A summaries, there is no modeling, estimation, or third-party adjustment layered on top of the government data.
Verify This Employer with OSHA
All injury, illness, and fatality figures on this page are sourced from Miner SW Tempe's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 236220 - Addition, alteration and renovation general contractors, commercial warehouse.
DART Rate, Transparent Calculation (2018)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
0 DART incidents × 200,000 ÷ 84,549 hours worked = 0.00 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Miner SW Tempe (this establishment) | 4.39 | OSHA ITA Form 300A, 3-year avg |
| Addition, alteration and renovation general contractors, commercial and institutional building industry avg | 2.90 | BLS IIF, NAICS 236220 |
| Arizona state avg (all industries) | 4.73 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Miner SW Tempe to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2018: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2018 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2017 | 8.2 | 8.2 | 3 | 0 | 0 |
| 2016 | 5.0 | 5.0 | 2 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Miner SW Tempe's reported OSHA injury record versus its Addition, alteration and renovation general contractors, commercial warehouse peers, not a verdict on whether any single site is safe today.
- At 151% of the Addition, alteration and renovation general contractors, commercial warehouse benchmark, Miner SW Tempe reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Addition, alteration and renovation general contractors, commercial warehouse sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Miner SW Tempe's safety grade?
How is the safety grade calculated?
How many injuries has Miner SW Tempe reported?
Where does PlainSafetyScore get its data?
Explore More Safety Data
Read our methodology - how this data is sourced, computed, and verified.