Waterproofing contractors · New Hampshire
Nicom Coatings LLC
Concord, NH · ~28 workers · 2 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 18.4
- Avg TCR
- 2.8
- Industry avg
- 0
- Fatalities
The verdict
Nicom Coatings LLC runs at 658% of its industry's injury rate - far more dangerous than the typical Waterproofing contractors workplace, earning a grade F.
- F
- Failing Safety Record
- 18.4
- avg TCR · per 100 workers
- 2.8
- industry benchmark (BLS)
- 10
- recordable injuries tracked
Grade compares Nicom Coatings LLC's OSHA Total Case Rate of 18.4 to the Waterproofing contractors BLS benchmark of 2.8 (658% of benchmark) across 2 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Nicom Coatings LLC's yearly Total Case Rate, against the 2.8 industry benchmark.
Where Nicom Coatings LLC falls in its industry
465 Waterproofing contractors establishmentsSafer than 1% of graded establishments in this industry, whose median TCR is 3.4.
Narrower to New Hampshire alone (the establishments it most directly competes with for workers and contracts): ranked #5 safest of 5 Waterproofing contractors employers in New Hampshire.
Trend analysis for Nicom Coatings LLC
Between 2023 and 2024, Nicom Coatings LLC's Total Case Rate worsened from 12.0 to 24.9 recordable injuries per 100 full-time workers, a 107% increase across 1 year of OSHA reporting.
The safest year on record was 2023, at a TCR of 12.0, while 2024 saw the highest rate, at 24.9, a spread of 12.9 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 2 reporting years, Nicom Coatings LLC recorded 10 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 10 injuries shown on this page for Nicom Coatings LLC are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 238390 - Waterproofing contractors.
DART Rate, Transparent Calculation (2024)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
2 DART incidents × 200,000 ÷ 48,271 hours worked = 8.29 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Nicom Coatings LLC (this establishment) | 18.43 | OSHA ITA Form 300A, 2-year avg |
| Concrete coating, glazing or sealing industry avg | 2.80 | BLS IIF, NAICS 238390 |
| New Hampshire state avg (all industries) | 5.93 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Nicom Coatings LLC to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 6 reportable incidents · 6 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 4 reportable incidents · 4 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 24.9 | 8.3 | 6 | 0 | 0 |
| 2023 | 12.0 | 6.0 | 4 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Nicom Coatings LLC's reported OSHA injury record versus its Waterproofing contractors peers, not a verdict on whether any single site is safe today.
- At 658% of the Waterproofing contractors benchmark, Nicom Coatings LLC reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Waterproofing contractors sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Nicom Coatings LLC's safety grade?
How many injuries has Nicom Coatings LLC reported?
Similar Employers
Matched by safety record across the industry, by workforce size within New Hampshire, and by nearby establishments in Concord - a different peer set than the category browse links below.
Similar TCR (~18.4)
Similar size (~28 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.