Manufacture of uninterruptible power supply systems · Ohio
Oh08 Ametek Solidstate Controls
Columbus, OH · ~162 workers · 2 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 1.9
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Oh08 Ametek Solidstate Controls runs at 58% of its industry's injury rate - safer than the typical Manufacture of uninterruptible power supply systems workplace, earning a grade B.
- B
- Good Safety Record
- 1.9
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 6
- recordable injuries tracked
Grade compares Oh08 Ametek Solidstate Controls's OSHA Total Case Rate to the BLS industry benchmark across 2 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.
Injury rate over time
Oh08 Ametek Solidstate Controls's yearly Total Case Rate, against the 3.3 industry benchmark.
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 335999.
Where Oh08 Ametek Solidstate Controls falls in its industry
268 Manufacture of uninterruptible establishmentsSafer than 40% of graded establishments in this industry, whose median TCR is 1.4.
Oh08 Ametek Solidstate Controls has an average TCR of 1.9, which is 58% of the industry average (3.3) for Manufacture of uninterruptible power supply systems. This is better than average.
Safety Insights for Oh08 Ametek Solidstate Controls
Oh08 Ametek Solidstate Controls operates an establishment with approximately 162 full-time equivalent workers in Columbus, OH, classified under the Manufacture of uninterruptible power supply systems industry (NAICS 335999). Across 2 years of mandatory OSHA Injury Tracking Application (ITA) reporting, this employer has accumulated 6 recordable injuries, 0 occupational illnesses, and 0 workplace fatalities. The average Total Case Rate (TCR) of 1.9 injuries per 100 full-time workers per year provides the anchor metric for the B letter grade (Good Safety Record).
Benchmarked against the Bureau of Labor Statistics industry average of 3.3 for Manufacture of uninterruptible power supply systems, Oh08 Ametek Solidstate Controls's workforce experiences 58% of the typical injury burden. This ratio matters because TCR already normalizes for hours worked, a 200,000-hour exposure base equals roughly 100 full-time workers, so establishments with very different headcounts can be compared directly. A TCR below the benchmark signals that controls, training, or automation may be outperforming peers.
Multi-year trend analysis is the single most reliable signal here: a one-year spike could reflect a single severe event, whereas sustained elevation across 2 reporting cycles points to systemic hazard exposure. Readers evaluating Oh08 Ametek Solidstate Controls as an employer, contractor, investment, or regulatory target should examine the yearly DART rate (days away, restricted, or transferred), the fatality count of 0, and any year-over-year deterioration shown in the table below. All figures come directly from employer-submitted OSHA Form 300A summaries, there is no modeling, estimation, or third-party adjustment layered on top of the government data.
Verify This Employer with OSHA
All injury, illness, and fatality figures on this page are sourced from Oh08 Ametek Solidstate Controls's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 335999 - Manufacture of uninterruptible power supply systems.
DART Rate, Transparent Calculation (2024)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
2 DART incidents × 200,000 ÷ 300,708 hours worked = 1.33 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Oh08 Ametek Solidstate Controls (this establishment) | 1.93 | OSHA ITA Form 300A, 2-year avg |
| Battery chargers, solid-state, manufacturing industry avg | 3.30 | BLS IIF, NAICS 335999 |
| Ohio state avg (all industries) | 3.90 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Oh08 Ametek Solidstate Controls to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 2.0 | 1.3 | 3 | 0 | 0 |
| 2023 | 1.9 | 1.2 | 3 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Oh08 Ametek Solidstate Controls's reported OSHA injury record, strong versus its Manufacture of uninterruptible power supply systems peers, but not a guarantee about any single site today.
- At 58% of the Manufacture of uninterruptible power supply systems benchmark, Oh08 Ametek Solidstate Controls reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Manufacture of uninterruptible power supply systems sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Oh08 Ametek Solidstate Controls's safety grade?
How is the safety grade calculated?
How many injuries has Oh08 Ametek Solidstate Controls reported?
Where does PlainSafetyScore get its data?
Explore More Safety Data
Read our methodology - how this data is sourced, computed, and verified.