Custome Roll Forming · Ohio
Ohio Slitting & Storage
CAMDEN, OH · ~35 workers · 5 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 6.4
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Ohio Slitting & Storage runs at 195% of its industry's injury rate - more dangerous than the typical Custome Roll Forming workplace, earning a grade D.
- D
- Poor Safety Record
- 6.4
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 12
- recordable injuries tracked
Grade compares Ohio Slitting & Storage's OSHA Total Case Rate to the BLS industry benchmark across 5 years of Form 300A filings (2016–2024).
Injury rate over time
Ohio Slitting & Storage's yearly Total Case Rate, against the 3.3 industry benchmark.
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 332114.
Where Ohio Slitting & Storage falls in its industry
101 Custome Roll Forming establishmentsSafer than 33% of graded establishments in this industry, whose median TCR is 5.0.
Ohio Slitting & Storage has an average TCR of 6.4, which is 195% of the industry average (3.3) for Custome Roll Forming. This is worse than average.
Safety Insights for Ohio Slitting & Storage
Ohio Slitting & Storage operates an establishment with approximately 35 full-time equivalent workers in CAMDEN, OH, classified under the Custome Roll Forming industry (NAICS 332114). Across 5 years of mandatory OSHA Injury Tracking Application (ITA) reporting, this employer has accumulated 12 recordable injuries, 0 occupational illnesses, and 0 workplace fatalities. The average Total Case Rate (TCR) of 6.4 injuries per 100 full-time workers per year provides the anchor metric for the D letter grade (Poor Safety Record).
Benchmarked against the Bureau of Labor Statistics industry average of 3.3 for Custome Roll Forming, Ohio Slitting & Storage's workforce experiences 195% of the typical injury burden. This ratio matters because TCR already normalizes for hours worked, a 200,000-hour exposure base equals roughly 100 full-time workers, so establishments with very different headcounts can be compared directly. A TCR above the benchmark flags a higher-than-typical risk profile for jobseekers, insurers, and enforcement agencies to examine.
Multi-year trend analysis is the single most reliable signal here: a one-year spike could reflect a single severe event, whereas sustained elevation across 5 reporting cycles points to systemic hazard exposure. Readers evaluating Ohio Slitting & Storage as an employer, contractor, investment, or regulatory target should examine the yearly DART rate (days away, restricted, or transferred), the fatality count of 0, and any year-over-year deterioration shown in the table below. All figures come directly from employer-submitted OSHA Form 300A summaries, there is no modeling, estimation, or third-party adjustment layered on top of the government data.
Verify This Employer with OSHA
All injury, illness, and fatality figures on this page are sourced from Ohio Slitting & Storage's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 332114 - Custome Roll Forming.
DART Rate, Transparent Calculation (2024)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
4 DART incidents × 200,000 ÷ 89,736 hours worked = 8.92 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Ohio Slitting & Storage (this establishment) | 6.44 | OSHA ITA Form 300A, 5-year avg |
| Custom roll forming metal products industry avg | 3.30 | BLS IIF, NAICS 332114 |
| Ohio state avg (all industries) | 3.90 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Ohio Slitting & Storage to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 4 reportable incidents · 4 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2022: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2021: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 8.9 | 8.9 | 4 | 0 | 0 |
| 2023 | 2.3 | 0.0 | 1 | 0 | 0 |
| 2022 | 172.9 | 86.4 | 2 | 0 | 0 |
| 2021 | 4.5 | 2.3 | 2 | 0 | 0 |
| 2020 | 10.0 | 3.3 | 3 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Ohio Slitting & Storage's reported OSHA injury record versus its Custome Roll Forming peers, not a verdict on whether any single site is safe today.
- At 195% of the Custome Roll Forming benchmark, Ohio Slitting & Storage reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Custome Roll Forming sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Ohio Slitting & Storage's safety grade?
How is the safety grade calculated?
How many injuries has Ohio Slitting & Storage reported?
Where does PlainSafetyScore get its data?
Explore More Safety Data
Read our methodology - how this data is sourced, computed, and verified.