Bags, plastics film, single wall or multiwall, manufacturing · California

Omega Extruding Corp of CA

Rancho Cucamonga, CA · ~123 workers · 7 years of OSHA Injury Tracking Application data.

F
Failing Safety Record
11.2
Avg TCR
3.3
Industry avg
0
Fatalities

The verdict

Omega Extruding Corp of CA runs at 341% of its industry's injury rate - far more dangerous than the typical Bags, plastics film, single wall or multiwall, manufacturing workplace, earning a grade F.

F
Failing Safety Record
11.2
avg TCR · per 100 workers
3.3
industry benchmark (BLS)
93
recordable injuries tracked

Grade compares Omega Extruding Corp of CA's OSHA Total Case Rate of 11.2 to the Bags, plastics film, single wall or multiwall, manufacturing BLS benchmark of 3.3 (341% of benchmark) across 7 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.

Injury rate over time

Omega Extruding Corp of CA's yearly Total Case Rate, against the 3.3 industry benchmark.

05101520 2017201820192020202220232024 11.43.3 Industry benchmarkOmega Extruding Corp of CA TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 326111.

Where Omega Extruding Corp of CA falls in its industry

335 Bags, plastics film, single wa establishments

Safer than 3% of graded establishments in this industry, whose median TCR is 2.8.

More dangerous than peersSafer than peers

Narrower to California alone (the establishments it most directly competes with for workers and contracts): ranked #19 safest of 21 Bags, plastics film, single wa employers in California.

Trend analysis for Omega Extruding Corp of CA

Between 2017 and 2024, Omega Extruding Corp of CA's Total Case Rate improved from 15.2 to 11.4 recordable injuries per 100 full-time workers, a 25% decrease across 7 years of OSHA reporting.

The safest year on record was 2020, at a TCR of 5.1, while 2019 saw the highest rate, at 15.4, a spread of 10.3 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.

Summed across those 7 reporting years, Omega Extruding Corp of CA recorded 93 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 7-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

The 93 injuries, 4 illnesses shown on this page for Omega Extruding Corp of CA are sourced from its own 7 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 326111 - Bags, plastics film, single wall or multiwall, manufacturing.

DART Rate, Transparent Calculation (2024)

What is the DART rate formula?

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

10 DART incidents × 200,000 ÷ 209,924 hours worked = 9.53 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
Omega Extruding Corp of CA (this establishment) 11.24 OSHA ITA Form 300A, 7-year avg
Manufacturing industry avg 3.30 BLS IIF, NAICS 326111
California state avg (all industries) 5.64 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Omega Extruding Corp of CA to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 11.4 9.5 10 2 0
2023 10.6 10.6 12 0 0
2022 8.7 8.7 6 2 0
2020 5.1 5.1 6 0 0
2019 15.4 15.4 22 0 0
2018 12.3 12.3 18 0 0
2017 15.2 15.2 19 0 0

What this grade means for you

Use this grade as a relative read on Omega Extruding Corp of CA's reported OSHA injury record versus its Bags, plastics film, single wall or multiwall, manufacturing peers, not a verdict on whether any single site is safe today.

  • At 341% of the Bags, plastics film, single wall or multiwall, manufacturing benchmark, Omega Extruding Corp of CA reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
  • Judge this record against the wider Bags, plastics film, single wall or multiwall, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is Omega Extruding Corp of CA's safety grade?
Omega Extruding Corp of CA has a safety grade of F (Failing Safety Record). This grade is based on their average Total Case Rate (TCR) of 11.2 compared to the BLS industry benchmark of 3.3 for Bags, plastics film, single wall or multiwall, manufacturing.
How many injuries has Omega Extruding Corp of CA reported?
Omega Extruding Corp of CA has reported 93 total injuries and 0 fatalities across 7 years of OSHA data (2024, 2023, 2022, 2020, 2019, 2018, 2017). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry, by workforce size within California, and by nearby establishments in Rancho Cucamonga - a different peer set than the category browse links below.

Similar TCR (~11.2)

Similar size (~123 workers)

Nearby in Rancho Cucamonga

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2020, 2019, 2018, 2017. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.