Siding contractors · Oregon
Pacific Construction Solutions Inc
Woodburn, OR · ~18 workers · 3 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 8.8
- Avg TCR
- 2.8
- Industry avg
- 0
- Fatalities
The verdict
Pacific Construction Solutions Inc runs at 316% of its industry's injury rate - far more dangerous than the typical Siding contractors workplace, earning a grade F.
- F
- Failing Safety Record
- 8.8
- avg TCR · per 100 workers
- 2.8
- industry benchmark (BLS)
- 2
- recordable injuries tracked
Grade compares Pacific Construction Solutions Inc's OSHA Total Case Rate of 8.8 to the Siding contractors BLS benchmark of 2.8 (316% of benchmark) across 3 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Pacific Construction Solutions Inc's yearly Total Case Rate, against the 2.8 industry benchmark.
Where Pacific Construction Solutions Inc falls in its industry
160 Siding contractors establishmentsSafer than 20% of graded establishments in this industry, whose median TCR is 3.7.
Narrower to Oregon alone (the establishments it most directly competes with for workers and contracts): ranked #6 safest of 7 Siding contractors employers in Oregon.
Trend analysis for Pacific Construction Solutions Inc
Between 2020 and 2023, Pacific Construction Solutions Inc's Total Case Rate improved from 26.5 to 0.0 recordable injuries per 100 full-time workers, a 100% decrease across 3 years of OSHA reporting.
The safest year on record was 2022, at a TCR of 0.0, while 2020 saw the highest rate, at 26.5, a spread of 26.5 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 3 reporting years, Pacific Construction Solutions Inc recorded 2 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 3-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 2 injuries shown on this page for Pacific Construction Solutions Inc are sourced from its own 3 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 238170 - Siding contractors.
DART Rate, Transparent Calculation (2023)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
0 DART incidents × 200,000 ÷ 29,493 hours worked = 0.00 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Pacific Construction Solutions Inc (this establishment) | 8.84 | OSHA ITA Form 300A, 3-year avg |
| Aluminum siding installation industry avg | 2.80 | BLS IIF, NAICS 238170 |
| Oregon state avg (all industries) | 6.16 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Pacific Construction Solutions Inc to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2023: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2022: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2023 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2022 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2020 | 26.5 | 13.3 | 2 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Pacific Construction Solutions Inc's reported OSHA injury record versus its Siding contractors peers, not a verdict on whether any single site is safe today.
- At 316% of the Siding contractors benchmark, Pacific Construction Solutions Inc reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Siding contractors sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Pacific Construction Solutions Inc's safety grade?
How many injuries has Pacific Construction Solutions Inc reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Oregon, and by nearby establishments in Woodburn - a different peer set than the category browse links below.
Similar TCR (~8.8)
Similar size (~18 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.