Awnings, rigid plastics or fiberglass, manufacturing · Texas
Plastic Molding Technology, LLC
El Paso, TX · ~128 workers · 7 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 2.9
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Plastic Molding Technology, LLC runs at 88% of its industry's injury rate - about level with the typical Awnings, rigid plastics or fiberglass, manufacturing workplace, earning a grade C.
Plastic Molding Technology, LLC: 2.9 TCR = 88% of Awnings, rigid plastics or fiberglass, manufacturing BLS 3.3 · 7y Form 300A (see methodology below)
Plastic Molding Technology, LLC safety composite
Plastic Molding Technology, LLC scores strongest on total case rate (tcr) (safer than 59% of same-industry peers) and weakest on dart rate (safer than 46%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
52/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- C 2.92 per 100 workers
Safer than 59% of industry peers
- DART rate
- D 1.87 per 100 workers
Safer than 46% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
TCR Δ
−0.9
2016→2022
Plastic Molding Technology, LLC injury rate improved
Plastic Molding Technology, LLC's TCR fell 0.9 from 3.4 in 2016 to 2.5 in 2022. Peak filing year was 2019 at 6.4 TCR. In 2022, DART was 0.64× this establishment's average TCR (severity share of cases).
2016=3.4 · 2017=4.4 · 2018=3.8 · 2019=6.4 · 2020=0.0 · 2021=0.0 · 2022=2.5
OSHA ITA Form 300A scorecard
Establishment book 326199 · El Paso, TX AT/BELOW-IND · MID
Grade C · TCR 2.9 · 88% of ind
- DART 1.9 DART
- RANK #74/161
- PHOTO Gregory Manufacturin…
- BOOK 7y book
- INJ 26 inj
- SIZE ~128 FTE
Nearest TCR peer: Gregory Manufacturing Inc. (0.0 TCR gap)
Read with this employer → · Industry book → · Texas employers → · Look up another →
Plastic Molding Technology, LLC in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Plastic Molding Technology, LLC
2.9 TCR
- Gregory Manufa
Gregory Manufacturing Inc.
2.9 TCR
- Channell Comme
Channell Commercial RKW
2.9 TCR
- Legrand AV Sha
Legrand AV Shakopee
2.9 TCR
- Tecton Product
Tecton Products, LLC - Roanoke
2.9 TCR
What this shows Plastic Molding Technology, LLC averages 2.9 TCR (88% of the Awnings, rigid plastics or fiberglass, manufacturing BLS benchmark).
Plastic Molding Technology, LLC TCR series: 2016=3.4 · 2017=4.4 · 2018=3.8 · 2019=6.4 · 2020=0 · 2021=0 · 2022=2.5 · BLS 3.3
Where Plastic Molding Technology, LLC falls in its industry
2,838 Awnings, rigid plastics or fib establishmentsSafer than 59% of graded establishments in this industry, whose median TCR is 3.5.
Narrower to Texas alone (the establishments it most directly competes with for workers and contracts): ranked #74 safest of 161 Awnings, rigid plastics or fib employers in Texas.
Plastic Molding Technology, LLC has more employees than the Awnings, rigid plastics or fiberglass, m median and a lower injury rate than the industry's median TCR of 3.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2022 | 2.5 | 1.9 | 4 | 0 | 0 |
| 2021 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2020 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2019 | 6.4 | 5.0 | 9 | 0 | 0 |
| 2018 | 3.8 | 3.8 | 6 | 0 | 0 |
| 2017 | 4.4 | 4.4 | 4 | 0 | 0 |
| 2016 | 3.4 | 3.4 | 3 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
326199 · TX · El Paso
2,838 Awnings, rigid plastics or fiberglass, manufacturing employers nationwide with a credible TCR · 38,394 rated employers in Texas with headcount on file · 974 employers in El Paso, TX · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Gregory Manufacturing Inc. | 2.9 TCR |
| NAICS-TCR | Channell Commercial RKW | 2.9 TCR |
| NAICS-TCR | Legrand AV Shakopee | 2.9 TCR |
| NAICS-TCR | Tecton Products, LLC - Roanoke | 2.9 TCR |
| STATE-SIZE | Glen Flora | 128 FTE |
| STATE-SIZE | North Alamo Water Supply Corporation | 128 FTE |
| STATE-SIZE | AUS1-DWH-AUSTIN DIVISION | 128 FTE |
| STATE-SIZE | CSA Construction Inc. | 128 FTE |
| CITY-NEAR | U.S. Border Patrol Sector - El Paso | 2,330 FTE |
| CITY-NEAR | Alegre Home Health Care, LLC EL PASO | 1,942 FTE |
| CITY-NEAR | Office of Field Operations - El Paso | 1,847 FTE |
| CITY-NEAR | MVT Services, LLC | 1,798 FTE |
| NAT-TCR | Oerlikon Friction Systems (US) Inc | 2.9 TCR |
| NAT-TCR | Meggitt Safety Systems, Inc. | 2.9 TCR |
| NAT-TCR | 1470 - Plymouth | 2.9 TCR |
| NAT-TCR | 1247 - Kendall | 2.9 TCR |
| NAT-SIZE | Hearthstone of Northern Nevada | 128 FTE |
| NAT-SIZE | YMCA Anthony Bowen | 128 FTE |
| NAT-SIZE | 2904-SAS-ID | 128 FTE |
| NAT-SIZE | Kenan Transport 50080 Tampa | 128 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.