Animal feed mills (except dog and cat) manufacturing · Wisconsin
ProVision Partners Cooperative
MARSHFIELD, WI · ~30 workers · 2 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 3.8
- Avg TCR
- 3.9
- Industry avg
- 0
- Fatalities
The verdict
ProVision Partners Cooperative runs at 96% of its industry's injury rate — about level with the typical Animal feed mills (except dog and cat) manufacturing workplace — earning a grade C.
- C
- Average Safety Record
- 3.8
- avg TCR · per 100 workers
- 3.9
- industry benchmark (BLS)
- 3
- recordable injuries tracked
Grade compares ProVision Partners Cooperative's OSHA Total Case Rate to the BLS industry benchmark across 2 years of Form 300A filings (2016–2024).
Injury rate over time
ProVision Partners Cooperative's yearly Total Case Rate, against the 3.9 industry benchmark.
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 311119.
ProVision Partners Cooperative has an average TCR of 3.8, which is 96% of the industry average (3.9) for Animal feed mills (except dog and cat) manufacturing. This is better than average.
Safety Insights for ProVision Partners Cooperative
ProVision Partners Cooperative operates an establishment with approximately 30 full-time equivalent workers in MARSHFIELD, WI, classified under the Animal feed mills (except dog and cat) manufacturing industry (NAICS 311119). Across 2 years of mandatory OSHA Injury Tracking Application (ITA) reporting, this employer has accumulated 3 recordable injuries, 0 occupational illnesses, and 0 workplace fatalities. The average Total Case Rate (TCR) of 3.8 injuries per 100 full-time workers per year provides the anchor metric for the C letter grade (Average Safety Record).
Benchmarked against the Bureau of Labor Statistics industry average of 3.9 for Animal feed mills (except dog and cat) manufacturing, ProVision Partners Cooperative's workforce experiences 96% of the typical injury burden. This ratio matters because TCR already normalizes for hours worked — a 200,000-hour exposure base equals roughly 100 full-time workers — so establishments with very different headcounts can be compared directly. A TCR below the benchmark signals that controls, training, or automation may be outperforming peers.
Multi-year trend analysis is the single most reliable signal here: a one-year spike could reflect a single severe event, whereas sustained elevation across 2 reporting cycles points to systemic hazard exposure. Readers evaluating ProVision Partners Cooperative as an employer, contractor, investment, or regulatory target should examine the yearly DART rate (days away, restricted, or transferred), the fatality count of 0, and any year-over-year deterioration shown in the table below. All figures come directly from employer-submitted OSHA Form 300A summaries — there is no modeling, estimation, or third-party adjustment layered on top of the government data.
Verify This Employer with OSHA
All injury, illness, and fatality figures on this page are sourced from ProVision Partners Cooperative's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source — name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor — OSHA Establishment-Specific Injury and Illness Data. NAICS 311119 — Animal feed mills (except dog and cat) manufacturing.
DART Rate — Transparent Calculation (2018)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
0 DART incidents × 200,000 ÷ 59,955 hours worked = 0.00 DART
Methodology: 29 CFR 1904 — OSHA Form 300A recordkeeping
Cross-Validating Context — Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| ProVision Partners Cooperative (this establishment) | 3.75 | OSHA ITA Form 300A, 2-year avg |
| Grain Mill Animal Feed industry avg | 3.90 | BLS IIF, NAICS 311119 |
| Wisconsin state avg (all industries) | 4.92 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics — Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by ProVision Partners Cooperative to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2018: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2017: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) — inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2018 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2017 | 7.5 | 2.5 | 3 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on ProVision Partners Cooperative's reported OSHA injury record — strong versus its Animal feed mills (except dog and cat) manufacturing peers, but not a guarantee about any single site today.
- At 96% of the Animal feed mills (except dog and cat) manufacturing benchmark, ProVision Partners Cooperative reports fewer injuries than typical peers — still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Animal feed mills (except dog and cat) manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is ProVision Partners Cooperative's safety grade?
How is the safety grade calculated?
How many injuries has ProVision Partners Cooperative reported?
Where does PlainSafetyScore get its data?
Explore More Safety Data
Read our methodology — how this data is sourced, computed, and verified.