Millwork installation · Ohio

Prusak's Precision Construction, Inc.

North Royalton, OH · ~24 workers · 8 years of OSHA Injury Tracking Application data.

B
Good Safety Record
1.5
Avg TCR
2.8
Industry avg
0
Fatalities

The verdict

Prusak's Precision Construction, Inc. runs at 52% of its industry's injury rate - safer than the typical Millwork installation workplace, earning a grade B.

B
Good Safety Record
1.5
avg TCR · per 100 workers
2.8
industry benchmark (BLS)
3
recordable injuries tracked

Grade compares Prusak's Precision Construction, Inc.'s OSHA Total Case Rate to the BLS industry benchmark across 8 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.

Injury rate over time

Prusak's Precision Construction, Inc.'s yearly Total Case Rate, against the 2.8 industry benchmark.

-20246 20172018201920202021202220232024 2.92.8 Industry benchmarkPrusak's Precision Construction, Inc. TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 238350.

Where Prusak's Precision Construction, Inc. falls in its industry

409 Millwork installation establishments

Safer than 80% of graded establishments in this industry, whose median TCR is 4.3.

More dangerous than peersSafer than peers

Narrower to Ohio alone (the establishments it most directly competes with for workers and contracts): ranked #11 safest of 18 Millwork installation employers in Ohio.

Prusak's Precision Construction, Inc. has an average TCR of 1.5, which is 52% of the industry average (2.8) for Millwork installation. This is better than average.

The letter grade is a transparent derived index PlainSafetyScore computes from public OSHA ITA and BLS benchmark data, not an official OSHA rating or safety certification. Full formula and thresholds: Methodology.

Safety Insights for Prusak's Precision Construction, Inc.

Prusak's Precision Construction, Inc. operates an establishment with approximately 24 full-time equivalent workers in North Royalton, OH, classified under the Millwork installation industry (NAICS 238350). Across 8 years of mandatory OSHA Injury Tracking Application (ITA) reporting, this employer has accumulated 3 recordable injuries, 0 occupational illnesses, and 0 workplace fatalities. The average Total Case Rate (TCR) of 1.5 injuries per 100 full-time workers per year provides the anchor metric for the B letter grade (Good Safety Record).

Benchmarked against the Bureau of Labor Statistics industry average of 2.8 for Millwork installation, Prusak's Precision Construction, Inc.'s workforce experiences 52% of the typical injury burden. This ratio matters because TCR already normalizes for hours worked, a 200,000-hour exposure base equals roughly 100 full-time workers, so establishments with very different headcounts can be compared directly. A TCR below the benchmark signals that controls, training, or automation may be outperforming peers.

Multi-year trend analysis is the single most reliable signal here: a one-year spike could reflect a single severe event, whereas sustained elevation across 8 reporting cycles points to systemic hazard exposure. Readers evaluating Prusak's Precision Construction, Inc. as an employer, contractor, investment, or regulatory target should examine the yearly DART rate (days away, restricted, or transferred), the fatality count of 0, and any year-over-year deterioration shown in the table below. All figures come directly from employer-submitted OSHA Form 300A summaries, there is no modeling, estimation, or third-party adjustment layered on top of the government data.

Verify This Employer with OSHA

All injury, illness, and fatality figures on this page are sourced from Prusak's Precision Construction, Inc.'s own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 238350 - Millwork installation.

DART Rate, Transparent Calculation (2024)

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

0 DART incidents × 200,000 ÷ 70,000 hours worked = 0.00 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
Prusak's Precision Construction, Inc. (this establishment) 1.46 OSHA ITA Form 300A, 8-year avg
Finish carpentry industry avg 2.80 BLS IIF, NAICS 238350
Ohio state avg (all industries) 3.90 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Prusak's Precision Construction, Inc. to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 2.9 0.0 1 0 0
2023 0.0 0.0 0 0 0
2022 3.8 0.0 1 0 0
2021 0.0 0.0 0 0 0
2020 5.0 5.0 1 0 0
2019 0.0 0.0 0 0 0
2018 0.0 0.0 0 0 0
2017 0.0 0.0 0 0 0

What this grade means for you

Use this grade as a relative read on Prusak's Precision Construction, Inc.'s reported OSHA injury record, strong versus its Millwork installation peers, but not a guarantee about any single site today.

  • At 52% of the Millwork installation benchmark, Prusak's Precision Construction, Inc. reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
  • Judge this record against the wider Millwork installation sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is Prusak's Precision Construction, Inc.'s safety grade?
Prusak's Precision Construction, Inc. has a safety grade of B (Good Safety Record). This grade is based on their average Total Case Rate (TCR) of 1.5 compared to the BLS industry benchmark of 2.8 for Millwork installation.
How is the safety grade calculated?
Safety grades are calculated by comparing an employer's average Total Case Rate (TCR) - the number of workplace injuries and illnesses per 100 full-time workers per year, against the Bureau of Labor Statistics (BLS) industry benchmark. Grade A means significantly below average injury rates; grade F means significantly above average.
How many injuries has Prusak's Precision Construction, Inc. reported?
Prusak's Precision Construction, Inc. has reported 3 total injuries and 0 fatalities across 8 years of OSHA data (2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.
Where does PlainSafetyScore get its data?
All safety data comes from OSHA's Injury Tracking Application (ITA), which collects mandatory establishment-level injury and illness reports from employers with 250+ employees or those in high-hazard industries. Industry benchmarks are from the Bureau of Labor Statistics (BLS) Injuries, Illnesses, and Fatalities (IIF) program.

Explore More Safety Data

→ More employers in Ohio → Industry: Millwork installation → Safety grades explained → How to check employer safety → Understanding OSHA rates
Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Related

All employers → | Rankings →
Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.